Timeline



Apr 11, 2016:

11:53 PM Changeset in webkit [199338] by achristensen@apple.com
  • 6 edits
    1 add in trunk

Build MiniBrowser with CMake on Mac
https://bugs.webkit.org/show_bug.cgi?id=156471

Reviewed by Daniel Bates.

Source/WebKit2:

  • DatabaseProcess/DatabaseProcess.messages.in:

Tools:

  • CMakeLists.txt:
  • DumpRenderTree/CMakeLists.txt:
  • DumpRenderTree/PlatformWin.cmake:
  • MiniBrowser/mac/CMakeLists.txt: Added.
11:16 PM Changeset in webkit [199337] by commit-queue@webkit.org
  • 4 edits in trunk/Source/JavaScriptCore

[JSC] B3 can use undefined bits or not defined required bits when spilling
https://bugs.webkit.org/show_bug.cgi?id=156486

Patch by Benjamin Poulain <bpoulain@apple.com> on 2016-04-11
Reviewed by Filip Pizlo.

Spilling had issues when replacing arguments in place.

The problems are:
1) If we have a 32bit stackslot, a x86 instruction could still try to load 64bits from it.
2) If we have a 64bit stackslot, Move32 would only set half the bits.
3) We were reducing Move to Move32 even if the top bits are read from the stack slot.

The case 1 appear with something like this:

Move32 %tmp0, %tmp1
Op64 %tmp1, %tmp2, %tmp3

When we spill %tmp1, the stack slot is 32bit, Move32 sets 32bits
but Op64 supports addressing for %tmp1. When we substitute %tmp1 in Op64,
we are creating a 64bit read for a 32bit stack slot.

The case 2 is an other common one. If we have:

BB#1

Move32 %tmp0, %tmp1
Jump #3

BB#2

Op64 %tmp0, %tmp1
Jump #3

BB#3

Use64 %tmp1

We have a stack slot of 64bits. When spilling %tmp1 in #1, we are
effectively doing a 32bit store on the stack slot, leaving the top bits undefined.

Case 3 is pretty much the same as 2 but we create the Move32 ourself
because the source is a 32bit with ZDef.

Case (1) is solved by requiring that the stack slot is at least as large as the largest
use/def of that tmp.

Case (2) and (3) are solved by not replacing a Tmp by an Address if the Def
is smaller than the stack slot.

  • b3/air/AirIteratedRegisterCoalescing.cpp:
  • b3/testb3.cpp:

(JSC::B3::testSpillDefSmallerThanUse):
(JSC::B3::testSpillUseLargerThanDef):
(JSC::B3::run):

11:12 PM Changeset in webkit [199336] by ryuan.choi@navercorp.com
  • 12 edits in trunk

[EFL] Do not pass context to EwkViewCreate
https://bugs.webkit.org/show_bug.cgi?id=156461

Reviewed by Darin Adler.

Source/WebKit2:

EWKViewCreate already has pageConfiguration which contains context.
So, this patch removes context argument from EWKViewCreate.

  • UIProcess/API/C/CoordinatedGraphics/WKView.cpp:

(WKViewCreate):

  • UIProcess/API/C/CoordinatedGraphics/WKView.h:
  • UIProcess/API/efl/ewk_view.cpp:

(EWKViewCreate): Call WebView::Create instead of WKViewCreate not to use WK API.
(ewk_view_smart_add):
(ewk_view_add_with_configuration):
(ewk_view_add_with_context):

  • UIProcess/API/efl/ewk_view_private.h:
  • UIProcess/efl/WebInspectorProxyEfl.cpp:

(WebKit::WebInspectorProxy::platformCreateInspectorPage):

  • UIProcess/efl/WebView.cpp:

(WebKit::WebView::create):
(WebKit::WebView::WebView):

  • UIProcess/efl/WebView.h:

Tools:

  • TestWebKitAPI/Tests/WebKit2/CoordinatedGraphics/WKViewUserViewportToContents.cpp:

(TestWebKitAPI::TEST): Removed context argument from EwkViewCreate calls.

  • TestWebKitAPI/efl/PlatformWebView.cpp:

(TestWebKitAPI::PlatformWebView::PlatformWebView): Ditto.

  • WebKitTestRunner/efl/PlatformWebViewEfl.cpp:

(WTR::PlatformWebView::PlatformWebView): Ditto.

10:49 PM Changeset in webkit [199335] by Darin Adler
  • 4 edits in trunk/Source/WebCore

Remove UsePointersEvenForNonNullableObjectArguments from HTMLOptionsCollection
https://bugs.webkit.org/show_bug.cgi?id=156491

Reviewed by Chris Dumez.

  • html/HTMLOptionsCollection.cpp:

(WebCore::HTMLOptionsCollection::add): Take a reference instead of a pointer.

  • html/HTMLOptionsCollection.h: Removed unneeded forward declaration. Changed

add to take a reference instead of a pointer for the element to add. Used
final instead of override on virtual functions.

  • html/HTMLOptionsCollection.idl: Removed now-unneeded attribute

UsePointersEvenForNonNullableObjectArguments; the only function affected was
add, and the overloading code was already checking for null.

9:15 PM Changeset in webkit [199334] by Darin Adler
  • 20 edits in trunk/Source

Remove UsePointersEvenForNonNullableObjectArguments from HTMLSelectElement
https://bugs.webkit.org/show_bug.cgi?id=156458

Reviewed by Chris Dumez.

Source/WebCore:

  • bindings/js/JSHTMLOptionsCollectionCustom.cpp:

(WebCore::JSHTMLOptionsCollection::remove): Updated to call remove with a reference
rather than a pointer.

  • bindings/js/JSHTMLSelectElementCustom.cpp:

(WebCore::JSHTMLSelectElement::remove): Updated to call remove with a reference
rather than a pointer.
(WebCore::selectIndexSetter): Updated to call setOption with a reference rather
than a pointer.

  • bindings/scripts/CodeGeneratorGObject.pm:

(GenerateFunction): Added basic support for passing wrappers by reference.
GObject bindings already check arguments for null, so didn't add any new checks.

  • bindings/scripts/test/GObject/WebKitDOMTestActiveDOMObject.cpp:
  • bindings/scripts/test/GObject/WebKitDOMTestCallback.cpp:
  • bindings/scripts/test/GObject/WebKitDOMTestCallbackFunction.cpp:
  • bindings/scripts/test/GObject/WebKitDOMTestInterface.cpp:
  • bindings/scripts/test/GObject/WebKitDOMTestObj.cpp:

Updated.

  • editing/FrameSelection.cpp: Updated includes.
  • html/HTMLOptionElement.cpp:

(WebCore::HTMLOptionElement::setSelected): Pass reference when calling
HTMLSelectElement::optionSelectionStateChanged.
(WebCore::HTMLOptionElement::insertedInto): Ditto.

  • html/HTMLOptionsCollection.cpp:

(WebCore::HTMLOptionsCollection::add): Moved null checking behavior here.
Preserves existing "silently do nothing if null".
(WebCore::HTMLOptionsCollection::remove): Changed function to take a reference
instead of a pointer.

  • html/HTMLOptionsCollection.h: Updated include. Changed remove to take a

reference instead of a pointer.

  • html/HTMLSelectElement.cpp:

(WebCore::HTMLSelectElement::add): Changed to take a reference instead of
a pointer. Also removed unneeded protect code, since insertBefore already
protects itself, and unneeded call to updateValidity, since the
HTMLSelectElement::childrenChanged function already calls updateValidity.
(WebCore::HTMLSelectElement::remove): Changed to take a reference instead
of a pointer.
(WebCore::HTMLSelectElement::setOption): Changed to take a reference
instead of a pointer.
(WebCore::HTMLSelectElement::setLength): Renamed "newLen" to "newLength".
Use Ref instead of RefPtr for result of createElement, which makes the
argument passed to add be a reference rather than a pointer.
(WebCore::HTMLSelectElement::willRespondToMouseClickEvents): Put the #if
for this here instead of in the header.
(WebCore::HTMLSelectElement::optionSelectionStateChanged): Changed to take
a reference instead of a pointer for the option element.

  • html/HTMLSelectElement.h: Removed unneeded includes. Derive privately

from TypeAheadDataSource instead of publicly. Make all overrides final
except for the one that is actually overridden by a derived class.
Changed the arguments of the add, remove, setOption, and
optionSelectionStateChanged functions to be references instead of pointers.
Tweaked formatting a bit and used nullptr instead of 0. Override
willRespondToMouseClickEvents on all platforms, not just iOS.

  • html/HTMLSelectElement.idl: Removed UsePointersEvenForNonNullableObjectArguments.

Removed a comment that is no longer needed. Made some types nullable to match
the specification, in places that currently have no effect on code generation.
Added a FIXME comment about the argument to setCustomValidity incorrectly being
marked as nullable.

Source/WebKit/win:

  • DOMCoreClasses.cpp: Added now-needed include.

Source/WebKit2:

  • WebProcess/Plugins/PDF/PDFPluginAnnotation.mm: Updated includes.
8:42 PM Changeset in webkit [199333] by rniwa@webkit.org
  • 1 edit
    1 add
    2 deletes in trunk/Websites/perf.webkit.org

Replace script runner to use mocha.js tests
https://bugs.webkit.org/show_bug.cgi?id=156490

Reviewed by Chris Dumez.

Replaced run-tests.js, which was a whole test harness for running legacy tests by tools/run-tests.py
which is a thin wrapper around mocha.js.

  • run-tests.js: Removed.
  • tests: Removed.
  • tools/run-tests.py: Added.

(main):

8:18 PM Changeset in webkit [199332] by rniwa@webkit.org
  • 6 edits in trunk/Websites/perf.webkit.org

New syncing script sometimes schedules a build request on a wrong builder
https://bugs.webkit.org/show_bug.cgi?id=156489

Reviewed by Stephanie Lewis.

The bug was caused by _scheduleNextRequestInGroupIfSlaveIsAvailable scheduling the next build request on
any available syncer regardless of whether the request is the first one in the test group or not because
BuildRequest.order was returning a string instead of a number.

Also fixed a bug that BuildbotTriggerable.syncOnce was re-ordering test groups by their id's instead of
respecting the order in which the perf dashboard returned.

  • public/v3/models/build-request.js:

(BuildRequest.prototype.order): Force the order to be a number.

  • server-tests/api-build-requests-tests.js: Assert the order as numbers.
  • server-tests/resources/mock-data.js:

(MockData.addAnotherMockTestGroup): Changed the test group id to 601, which is after the first mock data.
The old number was masking a bug in BuildbotTriggerable that it was re-ordering test groups by their id's
instead of using the order set forth by the perf dashboard.
(MockData.mockTestSyncConfigWithSingleBuilder):

  • server-tests/tools-buildbot-triggerable-tests.js: Added a test case for scheduling two build requests in

a single call to syncOnce. Each build request should be scheduled on the same builder as the previous build
requests in the same test group.

  • tools/js/buildbot-triggerable.js:

(BuildbotTriggerable.prototype.syncOnce): Order test groups by groupOrder, which is the index at which first
build request in the group appeared.
(BuildbotTriggerable.prototype._scheduleNextRequestInGroupIfSlaveIsAvailable): Don't re-order build requests
as they're already sorted on the server side.
(BuildbotTriggerable._testGroupMapForBuildRequests): Added groupOrder to test group info

8:07 PM Changeset in webkit [199331] by Brent Fulgham
  • 13 edits
    2 adds in trunk

Use WeakPtrs to avoid using deallocated Widgets and ScrollableAreas
https://bugs.webkit.org/show_bug.cgi?id=156420
<rdar://problem/25637378>

Reviewed by Darin Adler.

Source/WebCore:

Avoid the risk of using deallocated Widgets and ScrollableAreas by using WeakPtrs instead of
bare pointers. This allows us to remove some explicit calls to get ScrollableArea and Widget
members in the event handling logic. Instead, null checks are sufficient to ensure we never
accidentally dereference a deleted element.

  1. Modify the ScrollableArea class to support vending WeakPtrs.
  2. Modify the Event Handling code to use WeakPtrs to hold ScrollableArea and RenderWidget objects, and to null-check these elements after event handling dispatching is finished to handle cases where these objects are destroyed.

Test: fast/events/wheel-event-destroys-frame.html

fast/events/wheel-event-destroys-overflow.html

  • page/EventHandler.cpp:

(WebCore::EventHandler::platformPrepareForWheelEvents): Change signature for WeakPtr.
(WebCore::EventHandler::platformCompleteWheelEvent): Ditto.
(WebCore::EventHandler::platformNotifyIfEndGesture): Ditto.
(WebCore::widgetForElement): Change to return a WeakPtr.
(WebCore::EventHandler::handleWheelEvent): Use WeakPtrs to hold elements that might be destroyed
during event handling.

  • page/EventHandler.h:
  • page/mac/EventHandlerEfl.cpp: Rename passWheelEventToWidget to widgetDidHandleWheelEvent.
  • page/mac/EventHandlerGtk.cpp: Ditto.
  • page/mac/EventHandlerIOS.mm: Ditto.
  • page/mac/EventHandlerMac.mm:

(WebCore::scrollableAreaForEventTarget): Renamed from scrollViewForEventTarget. Return
a WeakPtr rather than a bare pointer.
(WebCore::scrollableAreaForContainerNode): Return WeakPtr rather than bare pointer.
(WebCore::EventHandler::completeWidgetWheelEvent): Added.
(WebCore::EventHandler::passWheelEventToWidget): Deleted.
(WebCore::EventHandler::platformPrepareForWheelEvents): Convert to WeakPtrs.
(WebCore::EventHandler::platformCompleteWheelEvent): Ditto.
(WebCore::EventHandler::platformCompletePlatformWidgetWheelEvent): Ditto.
(WebCore::EventHandler::platformNotifyIfEndGesture): Ditto.
(WebCore::EventHandler::widgetDidHandleWheelEvent): Renamed from passWheelEventToWidget.
(WebCore::EventHandler::widgetForEventTarget): Converted from static function to static
method so it can be shared with EventHandlerMac.
(WebCore::scrollViewForEventTarget): Deleted.

  • page/mac/EventHandlerWin.cpp: Rename passWheelEventToWidget to widgetDidHandleWheelEvent.
  • platform/ScrollableArea.cpp:
  • platform/ScrollableArea.h:

(WebCore::ScrollableArea::createWeakPtr): Added.

  • platform/Widget.h:

(WebCore::ScrollableArea::createWeakPtr): Added.

LayoutTests:

  • fast/events/wheel-event-destroys-overflow-expected.txt: Added.
  • fast/events/wheel-event-destroys-overflow.html: Added.
  • platform/ios-simulator/TestExpectations: Skip wheel-event test on iOS.
7:57 PM Changeset in webkit [199330] by dino@apple.com
  • 3 edits
    2 adds in trunk

putImageData needs to premultiply input
https://bugs.webkit.org/show_bug.cgi?id=156488
<rdar://problem/25672675>

Reviewed by Zalan Bujtas.

Source/WebCore:

I made a mistake in r187534 as I was converting get and putImageData
to use Accelerate. The incoming data is unmultiplied, and should
be premultiplied before copying into the backing store. I was
accidentally unmultiplying unmultiplied data, which caused
some pretty psychedelic results.

Test: fast/canvas/putImageData-unmultiplied.html

  • platform/graphics/cg/ImageBufferDataCG.cpp:

(WebCore::ImageBufferData::putData): Call premultiply, not unpremultiply.

LayoutTests:

Tests that putImageData is taking unmultiplied data,
premultiplying it, then copying into the backing store.

  • fast/canvas/putImageData-unmultiplied-expected.html: Added.
  • fast/canvas/putImageData-unmultiplied.html: Added.
7:20 PM Changeset in webkit [199329] by bshafiei@apple.com
  • 5 edits in branches/safari-601.1.46-branch/Source

Versioning.

7:12 PM Changeset in webkit [199328] by jonlee@apple.com
  • 7 edits in trunk/PerformanceTests

Update Animometer to accommodate different screens
https://bugs.webkit.org/show_bug.cgi?id=156449

Reviewed by Darin Adler.
Provisionally reviewed by Said Abou-Hallawa.

  • Animometer/index.html: Wrap button in a container to add padding at the bottom.
  • Animometer/resources/debug-runner/animometer.css:

(@media screen and (min-device-width: 1800px)): Deleted.
(@media screen and (min-width: 1800px)): Cannot use min-device-width since it may match incorrectly.
(screen and (max-device-height: 414px) and (orientation: landscape)): Some devices swap device width
and height with orientation change.

  • Animometer/resources/runner/animometer.css: Similar.

(screen and (min-device-width: 1024px) and (orientation: landscape)):
(screen and (max-device-height: 414px) and (orientation: landscape)):
(.frame-container): On smaller iPhones, adding 1px prevents the navigation bars from appearing.
(@media screen and (min-device-width: 768px) and (max-device-width: 1024px)): Deleted.
(@media (min-device-height: 768px) and (max-device-height: 1024px)): Target iPad Airs and similar.
(@media screen and (min-device-width: 1024px) and (max-device-width: 1366px)): Deleted.
(@media screen and (max-device-width: 1024px) and (min-device-height: 1366px)): Target iPad Pro.
(#results footer): Add padding below the button for testing again.

  • Animometer/tests/master/multiply.html: Remove the center text.
  • Animometer/tests/master/resources/text.js: Update the test so that in every frame the text moves.
  • Animometer/tests/master/text.html: Update the text sizing depending on the size of the device.
6:32 PM Changeset in webkit [199327] by bshafiei@apple.com
  • 1 copy in tags/Safari-601.1.46.126

New tag.

6:00 PM Changeset in webkit [199326] by commit-queue@webkit.org
  • 28 edits in trunk/Source

When clearing cache, also clear AVFoundation cache.
https://bugs.webkit.org/show_bug.cgi?id=155783
rdar://problem/25252541

Patch by Jeremy Jones <jeremyj@apple.com> on 2016-04-11
Reviewed by Darin Adler.

Source/WebCore:

Use AVAssetCache at a specified location on disk for all AVURLAssets. This AVAssetCache
can then be used to manage the cache storage used by AVFoundation. It is used to query the
contents of the cache in originsInMediaCache() and to clear the cache completely or partially in
clearMediaCache() and clearMediaCacheForOrigins().

Use SecurityOrigin instead of the less formal site String to represent origins in the cache.

  • html/HTMLMediaElement.cpp:

(WebCore::sharedMediaCacheDirectory): Added.
(WebCore::HTMLMediaElement::setMediaCacheDirectory): Added.
(WebCore::HTMLMediaElement::mediaCacheDirectory): Added.
(WebCore::HTMLMediaElement::originsInMediaCache): Added.
(WebCore::HTMLMediaElement::clearMediaCache): Added parameter.
(WebCore::HTMLMediaElement::clearMediaCacheForOrigins): Added.
(WebCore::HTMLMediaElement::mediaPlayerMediaCacheDirectory): Added.
(WebCore::HTMLMediaElement::getSitesInMediaCache): Deleted.
(WebCore::HTMLMediaElement::clearMediaCacheForSite): Deleted.

  • html/HTMLMediaElement.h:

(WebCore::HTMLMediaElement::clearMediaCache): Added parameter.

  • platform/graphics/MediaPlayer.cpp:

(WebCore::addMediaEngine): Add new cache methods.
(WebCore::addToHash): Added.
(WebCore::MediaPlayer::originsInMediaCache): Added.
(WebCore::MediaPlayer::clearMediaCache): Added parameter.
(WebCore::MediaPlayer::clearMediaCacheForOrigins): Added.
(WebCore::MediaPlayer::getSitesInMediaCache): Deleted.
(WebCore::MediaPlayer::clearMediaCacheForSite): Deleted.

  • platform/graphics/MediaPlayer.h:

(WebCore::MediaPlayerClient::mediaPlayerMediaCacheDirectory): Added.

  • platform/graphics/MediaPlayerPrivate.h:

(WebCore::MediaPlayerPrivateInterface::originsInMediaCache): Added.
(WebCore::MediaPlayerPrivateInterface::clearMediaCache): Added parameter.
(WebCore::MediaPlayerPrivateInterface::clearMediaCacheForOrigins): Added.
(WebCore::MediaPlayerPrivateInterface::getSitesInMediaCache): Deleted.
(WebCore::MediaPlayerPrivateInterface::clearMediaCacheForSite): Deleted.

  • platform/graphics/avfoundation/objc/MediaPlayerPrivateAVFoundationObjC.h:
  • platform/graphics/avfoundation/objc/MediaPlayerPrivateAVFoundationObjC.mm:

(WebCore::MediaPlayerPrivateAVFoundationObjC::registerMediaEngine): Added cache methods.
(WebCore::assetCacheForPath): Added.
(WebCore::MediaPlayerPrivateAVFoundationObjC::originsInMediaCache): Added.
(WebCore::toSystemClockTime): Added.
(WebCore::MediaPlayerPrivateAVFoundationObjC::clearMediaCache): Added parameter.
(WebCore::MediaPlayerPrivateAVFoundationObjC::clearMediaCacheForOrigins): Added.
(WebCore::MediaPlayerPrivateAVFoundationObjC::createAVAssetForURL): Added.

  • platform/graphics/mac/MediaPlayerPrivateQTKit.h:
  • platform/graphics/mac/MediaPlayerPrivateQTKit.mm:

(WebCore::MediaPlayerPrivateQTKit::registerMediaEngine): Added cache methods.
(WebCore::MediaPlayerPrivateQTKit::originsInMediaCache): Added.
(WebCore::MediaPlayerPrivateQTKit::clearMediaCache): Added parameter.
(WebCore::MediaPlayerPrivateQTKit::clearMediaCacheForOrigins): Added.
(WebCore::MediaPlayerPrivateQTKit::getSitesInMediaCache): Deleted.
(WebCore::MediaPlayerPrivateQTKit::clearMediaCacheForSite): Deleted.

  • platform/spi/mac/AVFoundationSPI.h:

Source/WebKit2:

Include the HTMLMediaElement media cache when doing disk cache operations.
Add a sandbox extension for media cache directory. This allows the UI process and the web process
to access the same cache.

  • Shared/WebProcessCreationParameters.cpp:

(WebKit::WebProcessCreationParameters::encode): Add media cache directory.
(WebKit::WebProcessCreationParameters::decode): Add media cache directory.

  • Shared/WebProcessCreationParameters.h:
  • UIProcess/API/APIProcessPoolConfiguration.cpp:

(API::ProcessPoolConfiguration::createWithLegacyOptions):
(API::ProcessPoolConfiguration::ProcessPoolConfiguration): Add media cache directory.
(API::ProcessPoolConfiguration::copy): Add media cache directory.

  • UIProcess/API/APIProcessPoolConfiguration.h:
  • UIProcess/API/APIWebsiteDataStore.cpp:

(API::WebsiteDataStore::defaultMediaCacheDirectory): Default implementation.

  • UIProcess/API/APIWebsiteDataStore.h:
  • UIProcess/API/Cocoa/APIWebsiteDataStoreCocoa.mm:

(API::WebsiteDataStore::defaultMediaCacheDirectory): Media cache is in temporary directory.
(API::WebsiteDataStore::tempDirectoryFileSystemRepresentation): For resources in temporary directory.
(API::WebsiteDataStore::defaultDataStoreConfiguration): Init media cache directory.

  • UIProcess/Cocoa/WebProcessPoolCocoa.mm:

(WebKit::WebProcessPool::legacyPlatformDefaultMediaCacheDirectory):

  • UIProcess/WebProcessPool.cpp:

(WebKit::legacyWebsiteDataStoreConfiguration): Add mediaCacheDirectory.
(WebKit::WebProcessPool::createNewWebProcess): Add mediaCacheDirectory.

  • UIProcess/WebProcessPool.h:
  • UIProcess/WebsiteData/WebsiteDataStore.cpp:

(WebKit::WebsiteDataStore::WebsiteDataStore):
(WebKit::WebsiteDataStore::fetchData): Implement for mediaCacheDirectory.
(WebKit::WebsiteDataStore::removeData): Implement for mediaCacheDirectory.

  • UIProcess/WebsiteData/WebsiteDataStore.h:
  • UIProcess/efl/WebProcessPoolEfl.cpp:

(WebKit::WebProcessPool::legacyPlatformDefaultMediaCacheDirectory): Added.

  • UIProcess/gtk/WebProcessPoolGtk.cpp:

(WebKit::WebProcessPool::legacyPlatformDefaultMediaCacheDirectory): Added.

  • WebProcess/WebProcess.cpp:

(WebKit::WebProcess::initializeWebProcess): Initialize media cache directory.

  • WebProcess/cocoa/WebProcessCocoa.mm:

(WebKit::WebProcess::platformInitializeWebProcess): Consume sandbox extension.

5:48 PM Changeset in webkit [199325] by commit-queue@webkit.org
  • 2 edits in trunk/Source/WebInspectorUI

Web Inspector: Tab Bar items get unreadable at narrow window widths, should collapse earlier
https://bugs.webkit.org/show_bug.cgi?id=156477

Patch by Joseph Pecoraro <Joseph Pecoraro> on 2016-04-11
Reviewed by Timothy Hatcher.

  • UserInterface/Views/TabBar.js:

(WebInspector.TabBar.prototype.layout):
Hide-titles sooner since a width of 60 results in only a few characters
and looks poor.

5:45 PM Changeset in webkit [199324] by jiewen_tan@apple.com
  • 2 edits in trunk/LayoutTests

Unskip imported/w3c/web-platform-tests/IndexedDB/idbindex-multientry-big.htm
https://bugs.webkit.org/show_bug.cgi?id=156480

Unreviewed test gardening.

  • platform/ios-simulator/TestExpectations:
4:49 PM Changeset in webkit [199323] by commit-queue@webkit.org
  • 25 edits in trunk/Source/WebCore

Unreviewed, rolling out r199310.
https://bugs.webkit.org/show_bug.cgi?id=156483

This change turns many indexeddb tests into crashes (Requested
by jwtan on #webkit).

Reverted changeset:

"Clean up IDBBindingUtilities."
https://bugs.webkit.org/show_bug.cgi?id=156472
http://trac.webkit.org/changeset/199310

4:47 PM Changeset in webkit [199322] by commit-queue@webkit.org
  • 2 edits in trunk/Source/WebInspectorUI

Web Inspector: Unstyled nodes in ObjectTree previews look poor
https://bugs.webkit.org/show_bug.cgi?id=156475
<rdar://problem/25667351>

Patch by Joseph Pecoraro <Joseph Pecoraro> on 2016-04-11
Reviewed by Timothy Hatcher.

  • UserInterface/Views/ObjectPreviewView.js:

(WebInspector.ObjectPreviewView.prototype._appendPreview):
Treat nodes as simple values.

(WebInspector.ObjectPreviewView.prototype._initTitleElement):
(WebInspector.ObjectPreviewView.prototype._appendValuePreview):
Format nodes nicely, and treat them as lossy since they have properties.

4:46 PM Changeset in webkit [199321] by commit-queue@webkit.org
  • 28 edits in trunk/Source

Unreviewed, rolling out r199315.
https://bugs.webkit.org/show_bug.cgi?id=156482

This change broke the OS X Yosemite build. (Requested by jwtan
on #webkit).

Reverted changeset:

"When clearing cache, also clear AVFoundation cache."
https://bugs.webkit.org/show_bug.cgi?id=155783
http://trac.webkit.org/changeset/199315

4:22 PM Changeset in webkit [199320] by Brian Burg
  • 9 edits in trunk/Source

Web Inspector: get rid of InspectorBasicValue and InspectorString subclasses
https://bugs.webkit.org/show_bug.cgi?id=156407
<rdar://problem/25627659>

Reviewed by Joseph Pecoraro.

Source/JavaScriptCore:

There's no point having these subclasses as they don't save any space.
Add a StringImpl to the union and merge some implementations of writeJSON.

Rename m_data to m_map and explicitly name the union as InspectorValue::m_value.
If the value is a string and the string is not empty or null (i.e., it has a
StringImpl), then we need to ref() and deref() the string as the InspectorValue
is created or destroyed.

Move uses of the subclass to InspectorValue and delete redundant methods.
Now, most InspectorValue methods are non-virtual so they can be templated.

  • bindings/ScriptValue.cpp:

(Deprecated::jsToInspectorValue):

  • inspector/InjectedScriptBase.cpp:

(Inspector::InjectedScriptBase::makeCall):
Don't used deleted subclasses.

  • inspector/InspectorValues.cpp:

(Inspector::InspectorValue::null):
(Inspector::InspectorValue::create):
(Inspector::InspectorValue::asValue):
(Inspector::InspectorValue::asBoolean):
(Inspector::InspectorValue::asDouble):
(Inspector::InspectorValue::asInteger):
(Inspector::InspectorValue::asString):
These only need one implementation now.

(Inspector::InspectorValue::writeJSON):
Still a virtual method since Object and Array need their members.

(Inspector::InspectorObjectBase::InspectorObjectBase):
(Inspector::InspectorBasicValue::asBoolean): Deleted.
(Inspector::InspectorBasicValue::asDouble): Deleted.
(Inspector::InspectorBasicValue::asInteger): Deleted.
(Inspector::InspectorBasicValue::writeJSON): Deleted.
(Inspector::InspectorString::asString): Deleted.
(Inspector::InspectorString::writeJSON): Deleted.
(Inspector::InspectorString::create): Deleted.
(Inspector::InspectorBasicValue::create): Deleted.

  • inspector/InspectorValues.h:

(Inspector::InspectorObjectBase::find):
(Inspector::InspectorObjectBase::setBoolean):
(Inspector::InspectorObjectBase::setInteger):
(Inspector::InspectorObjectBase::setDouble):
(Inspector::InspectorObjectBase::setString):
(Inspector::InspectorObjectBase::setValue):
(Inspector::InspectorObjectBase::setObject):
(Inspector::InspectorObjectBase::setArray):
(Inspector::InspectorArrayBase::pushBoolean):
(Inspector::InspectorArrayBase::pushInteger):
(Inspector::InspectorArrayBase::pushDouble):
(Inspector::InspectorArrayBase::pushString):
(Inspector::InspectorArrayBase::pushValue):
(Inspector::InspectorArrayBase::pushObject):
(Inspector::InspectorArrayBase::pushArray):
Use new factory methods.

  • replay/EncodedValue.cpp:

(JSC::ScalarEncodingTraits<bool>::encodeValue):
(JSC::ScalarEncodingTraits<double>::encodeValue):
(JSC::ScalarEncodingTraits<float>::encodeValue):
(JSC::ScalarEncodingTraits<int32_t>::encodeValue):
(JSC::ScalarEncodingTraits<int64_t>::encodeValue):
(JSC::ScalarEncodingTraits<uint32_t>::encodeValue):
(JSC::ScalarEncodingTraits<uint64_t>::encodeValue):

  • replay/EncodedValue.h:

Use new factory methods.

Source/WebCore:

  • inspector/InspectorDatabaseAgent.cpp: Don't use deleted subclasses.
4:16 PM Changeset in webkit [199319] by bshafiei@apple.com
  • 2 edits in tags/Safari-602.1.27.0.1/Source/WebCore

Merged r199317. rdar://problem/25627389

4:16 PM Changeset in webkit [199318] by jiewen_tan@apple.com
  • 2 edits in trunk/LayoutTests

Skip imported/w3c/web-platform-tests/IndexedDB/idbindex-multientry-big.htm on ios-simulators
https://bugs.webkit.org/show_bug.cgi?id=156480

Unreviewed test gardening.

  • platform/ios-simulator/TestExpectations:
4:13 PM Changeset in webkit [199317] by achristensen@apple.com
  • 2 edits in trunk/Source/WebCore

Unreviewed, rolling out r198909.
https://bugs.webkit.org/show_bug.cgi?id=156479

made double-click-and-drag on text drag instead of
highlighting (Requested by alexchristensen_ on #webkit).

Reverted changeset:

"eventMayStartDrag() does not check for shiftKey or
isOverLink"
https://bugs.webkit.org/show_bug.cgi?id=155746
http://trac.webkit.org/changeset/198909

Patch by Commit Queue <commit-queue@webkit.org> on 2016-04-11

4:00 PM Changeset in webkit [199316] by Chris Dumez
  • 7 edits in trunk/Source/WebCore

[WebIDL] Add support for [ImplementedAs] for EventHandler attributes
https://bugs.webkit.org/show_bug.cgi?id=156421

Reviewed by Darin Adler.

Add support for [ImplementedAs] for EventHandler attributes so we can
get rid of some ugly name hard-coding in the bindings generator.

  • Modules/notifications/Notification.idl:
  • bindings/scripts/CodeGeneratorJS.pm:

(EventHandlerAttributeEventName):

  • bindings/scripts/test/JS/JSTestObj.cpp:

(WebCore::jsTestObjOnwebkitfoo):
(WebCore::setJSTestObjOnwebkitfoo):

  • bindings/scripts/test/TestObj.idl:
  • dom/Element.idl:
  • page/DOMWindow.idl:
3:43 PM Changeset in webkit [199315] by commit-queue@webkit.org
  • 28 edits in trunk/Source

When clearing cache, also clear AVFoundation cache.
https://bugs.webkit.org/show_bug.cgi?id=155783
rdar://problem/25252541

Patch by Jeremy Jones <jeremyj@apple.com> on 2016-04-11
Reviewed by Darin Adler.

Source/WebCore:

Use AVAssetCache at a specified location on disk for all AVURLAssets. This AVAssetCache
can then be used to manage the cache storage used by AVFoundation. It is used to query the
contents of the cache in originsInMediaCache() and to clear the cache completely or partially in
clearMediaCache() and clearMediaCacheForOrigins().

Use SecurityOrigin instead of the less formal site String to represent origins in the cache.

  • html/HTMLMediaElement.cpp:

(WebCore::sharedMediaCacheDirectory): Added.
(WebCore::HTMLMediaElement::setMediaCacheDirectory): Added.
(WebCore::HTMLMediaElement::mediaCacheDirectory): Added.
(WebCore::HTMLMediaElement::originsInMediaCache): Added.
(WebCore::HTMLMediaElement::clearMediaCache): Added parameter.
(WebCore::HTMLMediaElement::clearMediaCacheForOrigins): Added.
(WebCore::HTMLMediaElement::mediaPlayerMediaCacheDirectory): Added.
(WebCore::HTMLMediaElement::getSitesInMediaCache): Deleted.
(WebCore::HTMLMediaElement::clearMediaCacheForSite): Deleted.

  • html/HTMLMediaElement.h:

(WebCore::HTMLMediaElement::clearMediaCache): Added parameter.

  • platform/graphics/MediaPlayer.cpp:

(WebCore::addMediaEngine): Add new cache methods.
(WebCore::addToHash): Added.
(WebCore::MediaPlayer::originsInMediaCache): Added.
(WebCore::MediaPlayer::clearMediaCache): Added parameter.
(WebCore::MediaPlayer::clearMediaCacheForOrigins): Added.
(WebCore::MediaPlayer::getSitesInMediaCache): Deleted.
(WebCore::MediaPlayer::clearMediaCacheForSite): Deleted.

  • platform/graphics/MediaPlayer.h:

(WebCore::MediaPlayerClient::mediaPlayerMediaCacheDirectory): Added.

  • platform/graphics/MediaPlayerPrivate.h:

(WebCore::MediaPlayerPrivateInterface::originsInMediaCache): Added.
(WebCore::MediaPlayerPrivateInterface::clearMediaCache): Added parameter.
(WebCore::MediaPlayerPrivateInterface::clearMediaCacheForOrigins): Added.
(WebCore::MediaPlayerPrivateInterface::getSitesInMediaCache): Deleted.
(WebCore::MediaPlayerPrivateInterface::clearMediaCacheForSite): Deleted.

  • platform/graphics/avfoundation/objc/MediaPlayerPrivateAVFoundationObjC.h:
  • platform/graphics/avfoundation/objc/MediaPlayerPrivateAVFoundationObjC.mm:

(WebCore::MediaPlayerPrivateAVFoundationObjC::registerMediaEngine): Added cache methods.
(WebCore::assetCacheForPath): Added.
(WebCore::MediaPlayerPrivateAVFoundationObjC::originsInMediaCache): Added.
(WebCore::toSystemClockTime): Added.
(WebCore::MediaPlayerPrivateAVFoundationObjC::clearMediaCache): Added parameter.
(WebCore::MediaPlayerPrivateAVFoundationObjC::clearMediaCacheForOrigins): Added.
(WebCore::MediaPlayerPrivateAVFoundationObjC::createAVAssetForURL): Added.

  • platform/graphics/mac/MediaPlayerPrivateQTKit.h:
  • platform/graphics/mac/MediaPlayerPrivateQTKit.mm:

(WebCore::MediaPlayerPrivateQTKit::registerMediaEngine): Added cache methods.
(WebCore::MediaPlayerPrivateQTKit::originsInMediaCache): Added.
(WebCore::MediaPlayerPrivateQTKit::clearMediaCache): Added parameter.
(WebCore::MediaPlayerPrivateQTKit::clearMediaCacheForOrigins): Added.
(WebCore::MediaPlayerPrivateQTKit::getSitesInMediaCache): Deleted.
(WebCore::MediaPlayerPrivateQTKit::clearMediaCacheForSite): Deleted.

  • platform/spi/mac/AVFoundationSPI.h:

Source/WebKit2:

Include the HTMLMediaElement media cache when doing disk cache operations.
Add a sandbox extension for media cache directory. This allows the UI process and the web process
to access the same cache.

  • Shared/WebProcessCreationParameters.cpp:

(WebKit::WebProcessCreationParameters::encode): Add media cache directory.
(WebKit::WebProcessCreationParameters::decode): Add media cache directory.

  • Shared/WebProcessCreationParameters.h:
  • UIProcess/API/APIProcessPoolConfiguration.cpp:

(API::ProcessPoolConfiguration::createWithLegacyOptions):
(API::ProcessPoolConfiguration::ProcessPoolConfiguration): Add media cache directory.
(API::ProcessPoolConfiguration::copy): Add media cache directory.

  • UIProcess/API/APIProcessPoolConfiguration.h:
  • UIProcess/API/APIWebsiteDataStore.cpp:

(API::WebsiteDataStore::defaultMediaCacheDirectory): Default implementation.

  • UIProcess/API/APIWebsiteDataStore.h:
  • UIProcess/API/Cocoa/APIWebsiteDataStoreCocoa.mm:

(API::WebsiteDataStore::defaultMediaCacheDirectory): Media cache is in temporary directory.
(API::WebsiteDataStore::tempDirectoryFileSystemRepresentation): For resources in temporary directory.
(API::WebsiteDataStore::defaultDataStoreConfiguration): Init media cache directory.

  • UIProcess/Cocoa/WebProcessPoolCocoa.mm:

(WebKit::WebProcessPool::legacyPlatformDefaultMediaCacheDirectory):

  • UIProcess/WebProcessPool.cpp:

(WebKit::legacyWebsiteDataStoreConfiguration): Add mediaCacheDirectory.
(WebKit::WebProcessPool::createNewWebProcess): Add mediaCacheDirectory.

  • UIProcess/WebProcessPool.h:
  • UIProcess/WebsiteData/WebsiteDataStore.cpp:

(WebKit::WebsiteDataStore::WebsiteDataStore):
(WebKit::WebsiteDataStore::fetchData): Implement for mediaCacheDirectory.
(WebKit::WebsiteDataStore::removeData): Implement for mediaCacheDirectory.

  • UIProcess/WebsiteData/WebsiteDataStore.h:
  • UIProcess/efl/WebProcessPoolEfl.cpp:

(WebKit::WebProcessPool::legacyPlatformDefaultMediaCacheDirectory): Added.

  • UIProcess/gtk/WebProcessPoolGtk.cpp:

(WebKit::WebProcessPool::legacyPlatformDefaultMediaCacheDirectory): Added.

  • WebProcess/WebProcess.cpp:

(WebKit::WebProcess::initializeWebProcess): Initialize media cache directory.

  • WebProcess/cocoa/WebProcessCocoa.mm:

(WebKit::WebProcess::platformInitializeWebProcess): Consume sandbox extension.

2:42 PM Changeset in webkit [199314] by commit-queue@webkit.org
  • 4 edits in trunk/Source/WebCore

[WebGL2] Use Open GL ES 3.0 to back WebGL2 contexts
https://bugs.webkit.org/show_bug.cgi?id=141178

Patch by Antoine Quint <Antoine Quint> on 2016-04-11
Reviewed by Dean Jackson.

We add a new useGLES3 attribute when creating a GraphicsContext3D in the event that the
context type is "webgl2". This attribute is then read by the GraphicsContext3D constructor
to request an Open GL ES 3.0 backend when creating the EAGLContext on iOS.

  • html/canvas/WebGLRenderingContextBase.cpp:

(WebCore::WebGLRenderingContextBase::create):

  • platform/graphics/GraphicsContext3D.h:

(WebCore::GraphicsContext3D::Attributes::Attributes):

  • platform/graphics/mac/GraphicsContext3DMac.mm:

(WebCore::GraphicsContext3D::GraphicsContext3D):

2:35 PM Changeset in webkit [199313] by jiewen_tan@apple.com
  • 4 edits
    2 adds in trunk

fast/loader/opaque-base-url.html crashing during mac and ios debug tests
https://bugs.webkit.org/show_bug.cgi?id=156179
<rdar://problem/25507719>

Reviewed by Ryosuke Niwa.

Source/WebCore:

Navigate to about:blank if the provided src of an iframe/frame cannot be
resolved to a valid URL.

Test: fast/loader/iframe-src-invalid-url.html

  • loader/SubframeLoader.cpp:

(WebCore::SubframeLoader::requestFrame):

LayoutTests:

  • fast/loader/iframe-src-invalid-url-expected.txt: Added.
  • fast/loader/iframe-src-invalid-url.html: Added.
2:33 PM Changeset in webkit [199312] by commit-queue@webkit.org
  • 25 edits
    2 adds
    1 delete in trunk

Merge CG ImageSource and non CG ImageSource implementation in one file
https://bugs.webkit.org/show_bug.cgi?id=155456

Patch by Said Abou-Hallawa <sabouhallawa@apple,com> on 2016-04-11
Reviewed by Darin Adler.
Source/WebCore:

ImageSource for CG and CG code paths look very similar. All the platform
specific code can be moved to ImageDecoder classes for CG and non CG. And
we can have the ImageSource be platform independent and we get rid of
ImageSourceCG.cpp.

Test: fast/images/image-subsampling.html

  • CMakeLists.txt:
  • PlatformAppleWin.cmake:
  • PlatformMac.cmake:
  • WebCore.xcodeproj/project.pbxproj:

Delete ImageSourceCG.cpp form all make files and add ImageSource.cpp to
CMakeLists.txt.

  • platform/Cursor.cpp:

(WebCore::determineHotSpot):

  • platform/graphics/BitmapImage.cpp:

(WebCore::BitmapImage::hotSpot):
(WebCore::BitmapImage::getHotSpot): Deleted.

  • platform/graphics/BitmapImage.h:
  • platform/graphics/Image.h:

(WebCore::Image::hotSpot):
(WebCore::Image::getHotSpot): Deleted.
Rename getHotSpot() to hotSpot() and change it to return Optional<IntPoint>.

  • platform/graphics/ImageSource.cpp:

(WebCore::ImageSource::~ImageSource): Remove clear(true) call. It does nothing.
(WebCore::ImageSource::clearFrameBufferCache): A wrapper which calls ImageDecoder::clearFrameBufferCache().
(WebCore::ImageSource::clear): Calls clearFrameBufferCache() which will do nothing for CG.

(WebCore::ImageSource::ensureDecoderIsCreated): Change SharedBuffer* to
const SharedBuffer& and remove the call to ImageDecoder::setMaxNumPixels().
The value of const static int CG ImageDecoder::m_maxNumPixels will be set
based on IMAGE_DECODER_DOWN_SAMPLING.

(WebCore::ImageSource::setData): Pass SharedBuffer& to the underlying functions.

(WebCore::ImageSource::calculateMaximumSubsamplingLevel): Returns the maximum
subsampling level allowed for an image.

(WebCore::ImageSource::subsamplingLevelForScale): Converts from a scale to
SubsamplingLevel taking into consideration the maximumSubsamplingLevel for
a particular image.

(WebCore::ImageSource::bytesDecodedToDetermineProperties): Returns the number
of encoded bytes which can determine the image properties. For non CG it's
zero. For CG it is a maximum value which can be corrected later.

(WebCore::ImageSource::isSizeAvailable):
(WebCore::ImageSource::sizeRespectingOrientation):
(WebCore::ImageSource::frameCount):
(WebCore::ImageSource::repetitionCount):
(WebCore::ImageSource::filenameExtension):
(WebCore::ImageSource::getHotSpot):
(WebCore::ImageSource::frameIsCompleteAtIndex):
(WebCore::ImageSource::frameHasAlphaAtIndex):
(WebCore::ImageSource::allowSubsamplingOfFrameAtIndex):
(WebCore::ImageSource::frameSizeAtIndex):
(WebCore::ImageSource::frameBytesAtIndex):
(WebCore::ImageSource::frameDurationAtIndex):
(WebCore::ImageSource::orientationAtIndex):
(WebCore::ImageSource::createFrameImageAtIndex):
These are wrappers for the ImageDecoder APIs. The purpose of these functions
is to ensure the ImageDecoder is created.

(WebCore::ImageSource::dump): Called from BitmapImage::dump().

(WebCore::ImageSource::getHotSpot): Deleted.

  • platform/graphics/ImageSource.h:

(WebCore::ImageSource::setAllowSubsampling): Called from BitmapImage::setAllowSubsampling().

(WebCore::ImageSource::maxPixelsPerDecodedImage): Deleted.
(WebCore::ImageSource::setMaxPixelsPerDecodedImage): Deleted.
Setting maxPixelsPerDecodedImage was moved to the non CG ImageDecoder.

  • platform/graphics/cg/ImageDecoderCG.cpp:

(WebCore::ImageDecoder::setData): Change SharedBuffer* to SharedBuffer&.

(WebCore::ImageDecoder::subsamplingLevelForScale): Deleted.
The code was moved to ImageSource::subsamplingLevelForScale().

  • platform/graphics/cg/ImageDecoderCG.h:

(WebCore::ImageDecoder::create): Make the prototype of this function
suitable for CG and non CG cases.
(WebCore::ImageDecoder::clearFrameBufferCache): Empty functions for CG.

  • platform/graphics/cg/ImageSourceCG.cpp: Removed.
  • platform/image-decoders/ImageDecoder.cpp:

(WebCore::ImageDecoder::frameIsCompleteAtIndex): A mew function to return
whether the frame decoding is complete or not.

(WebCore::ImageDecoder::frameHasAlphaAtIndex): Simplify the logic.

(WebCore::ImageDecoder::frameDurationAtIndex): The code was moved from
ImageSource::frameDurationAtIndex() in ImageSource.cpp.

(WebCore::ImageDecoder::createFrameImageAtIndex): The code was moved from
ImageSource::createFrameImageAtIndex() in ImageSource.cpp.

  • platform/image-decoders/ImageDecoder.h:

(WebCore::ImageDecoder::ImageDecoder): Initialize the members in class.
(WebCore::ImageDecoder::~ImageDecoder): Fix the braces style.
(WebCore::ImageDecoder::setData): Change the type of the argument from
SharedBuffer* to SharedBuffer&.
(WebCore::ImageDecoder::frameSizeAtIndex): Add the argument SubsamplingLevel
so it can have the same prototype as CG.
(WebCore::ImageDecoder::orientationAtIndex): Rename it to the same of CG.

(WebCore::ImageDecoder::allowSubsamplingOfFrameAtIndex):
(WebCore::ImageDecoder::bytesDecodedToDetermineProperties):
(WebCore::ImageDecoder::subsamplingLevelForScale): Add these functions
and return the default values so we do not have to add directive compiled
non CG blocks in ImageSource.cpp.

(WebCore::ImageDecoder::hotSpot): Return Optional<IntPoint>.

(WebCore::ImageDecoder::orientation): Deleted.
(WebCore::ImageDecoder::setMaxNumPixels): Deleted.

  • platform/image-decoders/bmp/BMPImageDecoder.cpp:

(WebCore::BMPImageDecoder::setData):

  • platform/image-decoders/bmp/BMPImageDecoder.h:
  • platform/image-decoders/gif/GIFImageDecoder.cpp:

(WebCore::GIFImageDecoder::setData):
(WebCore::GIFImageDecoder::decode):

  • platform/image-decoders/gif/GIFImageDecoder.h:
  • platform/image-decoders/gif/GIFImageReader.h:

(GIFImageReader::setData):

  • platform/image-decoders/ico/ICOImageDecoder.cpp:

(WebCore::ICOImageDecoder::setData):
Use reference SharedBuffer instead of pointer SharedBuffer.

(WebCore::ICOImageDecoder::hotSpot):
(WebCore::ICOImageDecoder::hotSpotAtIndex):
Change hotSpot() to return Optional<IntPoint>.

  • platform/image-decoders/ico/ICOImageDecoder.h:

(WebCore::ICOImageDecoder::setDataForPNGDecoderAtIndex):
Pass reference SharedBuffer instead of pointer SharedBuffer.

Source/WebKit2:

  • UIProcess/API/efl/EwkView.cpp:

(EwkView::setCursor):
Replace the call to Image::getHotSpot() by Image::hotSpot().

LayoutTests:

Add a test for image sub-sampling. The image subsampling is enabled by
default for iOS platform only. But it can be explicitly enabled through
the setting ImageSubsamplingEnabled.

  • fast/images/image-subsampling-expected.html: Added.
  • fast/images/image-subsampling.html: Added.
2:32 PM Changeset in webkit [199311] by andersca@apple.com
  • 6 edits
    2 moves in trunk/Source/WebKit2

Rename WKOpenPanelParameters files to WKOpenPanelParametersRef
https://bugs.webkit.org/show_bug.cgi?id=156473

Reviewed by Alex Christensen.

  • UIProcess/API/C/WKOpenPanelParameters.cpp:

(WKOpenPanelParametersGetTypeID): Deleted.
(WKOpenPanelParametersGetAllowsMultipleFiles): Deleted.
(WKOpenPanelParametersCopyAcceptedMIMETypes): Deleted.
(WKOpenPanelParametersCopyCapture): Deleted.
(WKOpenPanelParametersGetCaptureEnabled): Deleted.
(WKOpenPanelParametersCopySelectedFileNames): Deleted.

  • UIProcess/API/C/WKOpenPanelParametersRef.cpp: Renamed from Source/WebKit2/UIProcess/API/C/WKOpenPanelParameters.cpp.

(WKOpenPanelParametersGetTypeID):
(WKOpenPanelParametersGetAllowsMultipleFiles):
(WKOpenPanelParametersCopyAcceptedMIMETypes):
(WKOpenPanelParametersCopyCapture):
(WKOpenPanelParametersGetCaptureEnabled):
(WKOpenPanelParametersCopySelectedFileNames):

  • UIProcess/API/C/WKOpenPanelParametersRef.h: Renamed from Source/WebKit2/UIProcess/API/C/WKOpenPanelParameters.h.
  • UIProcess/API/C/WebKit2_C.h:
  • UIProcess/API/efl/ewk_file_chooser_request.cpp:
  • UIProcess/mac/WebInspectorProxyMac.mm:
  • WebKit2.xcodeproj/project.pbxproj:
2:31 PM Changeset in webkit [199310] by beidson@apple.com
  • 25 edits in trunk/Source/WebCore

Clean up IDBBindingUtilities.
https://bugs.webkit.org/show_bug.cgi?id=156472

Reviewed by Alex Christensen.

No new tests (No change in behavior).

  • Get rid of a whole bunch of unused functions (since we got rid of Legacy IDB).
  • Make more functions deal in ExecState/ScriptExecutionContexts instead of DOMRequestState.
  • Make more functions deal in JSValue instead of Deprecated::ScriptValue.
  • bindings/scripts/IDLAttributes.txt: Add a new attribute to signify that an implementation returns JSValues instead of Deprecated::ScriptState
  • bindings/scripts/CodeGeneratorJS.pm:

(NativeToJSValue): Use that new attribute.

  • Modules/indexeddb/IDBAny.cpp:

(WebCore::IDBAny::IDBAny):
(WebCore::IDBAny::scriptValue):

  • Modules/indexeddb/IDBAny.h:

(WebCore::IDBAny::create):

  • Modules/indexeddb/IDBCursor.cpp:

(WebCore::IDBCursor::key):
(WebCore::IDBCursor::primaryKey):
(WebCore::IDBCursor::value):
(WebCore::IDBCursor::update):
(WebCore::IDBCursor::continueFunction):
(WebCore::IDBCursor::deleteFunction):
(WebCore::IDBCursor::setGetResult):

  • Modules/indexeddb/IDBCursor.h:
  • Modules/indexeddb/IDBCursor.idl:
  • Modules/indexeddb/IDBCursorWithValue.idl:
  • Modules/indexeddb/IDBFactory.cpp:

(WebCore::IDBFactory::cmp):

  • Modules/indexeddb/IDBIndex.cpp:

(WebCore::IDBIndex::count):
(WebCore::IDBIndex::get):
(WebCore::IDBIndex::getKey):

  • Modules/indexeddb/IDBKeyRange.cpp:

(WebCore::IDBKeyRange::lowerValue):
(WebCore::IDBKeyRange::upperValue):
(WebCore::IDBKeyRange::only):
(WebCore::IDBKeyRange::lowerBound):
(WebCore::IDBKeyRange::upperBound):
(WebCore::IDBKeyRange::bound):

  • Modules/indexeddb/IDBKeyRange.h:
  • Modules/indexeddb/IDBKeyRange.idl:
  • Modules/indexeddb/IDBObjectStore.cpp:

(WebCore::IDBObjectStore::get):
(WebCore::IDBObjectStore::modernDelete):
(WebCore::IDBObjectStore::count):

  • Modules/indexeddb/IDBRequest.cpp:

(WebCore::IDBRequest::setResult):
(WebCore::IDBRequest::setResultToStructuredClone):

  • Modules/indexeddb/server/MemoryObjectStore.cpp:

(WebCore::IDBServer::MemoryObjectStore::updateIndexesForPutRecord):
(WebCore::IDBServer::MemoryObjectStore::populateIndexWithExistingRecords):

  • bindings/js/IDBBindingUtilities.cpp:

(WebCore::idbKeyPathFromValue):
(WebCore::deserializeIDBValueDataToJSValue):
(WebCore::scriptValueToIDBKey):
(WebCore::idbKeyDataToScriptValue):
(WebCore::idbKeyDataToJSValue): Deleted.
(WebCore::injectIDBKeyIntoScriptValue): Deleted.
(WebCore::createIDBKeyFromScriptValueAndKeyPath): Deleted.
(WebCore::maybeCreateIDBKeyFromScriptValueAndKeyPath): Deleted.
(WebCore::canInjectIDBKeyIntoScriptValue): Deleted.
(WebCore::deserializeIDBValue): Deleted.
(WebCore::deserializeIDBValueData): Deleted.
(WebCore::deserializeIDBValueBuffer): Deleted.
(WebCore::idbValueDataToJSValue): Deleted.
(WebCore::idbKeyToScriptValue): Deleted.

  • bindings/js/IDBBindingUtilities.h:
  • bindings/js/JSIDBAnyCustom.cpp:

(WebCore::toJS):

  • bindings/js/JSIDBDatabaseCustom.cpp:

(WebCore::JSIDBDatabase::createObjectStore):

  • bindings/js/JSIDBObjectStoreCustom.cpp:

(WebCore::JSIDBObjectStore::createIndex):

  • dom/ScriptExecutionContext.cpp:

(WebCore::ScriptExecutionContext::execState):

  • dom/ScriptExecutionContext.h:
  • inspector/InspectorIndexedDBAgent.cpp:
1:10 PM Changeset in webkit [199309] by barraclough@apple.com
  • 16 edits in trunk/Source

WebKit should adopt journal_mode=wal for all SQLite databases.
https://bugs.webkit.org/show_bug.cgi?id=133496

Reviewed by Darin Adler.

Source/WebCore:

The statement intended to enable WAL mode is always failing because it is missing a
prepare(). Fix this. We were also previously permitting SQLITE_OK results - this
was in error (we were only getting these because stepping the unprepared statement
returned SQLITE_OK). Also set the SQLITE_OPEN_AUTOPROXY flag when opening the
database - this will improve perfomance when the database is accessed via an AFP
mount.

This exposed a bug, that deleteAllDatabases does not actually delete the databases on
iOS, for testing to reset back to a known state between tests it should be doing so.

  • Modules/webdatabase/DatabaseTracker.cpp:

(WebCore::DatabaseTracker::deleteAllDatabases):

  • force databases to actually be deleted on iOS. This method is only used from testing code (DumpRenderTree / WebKitTestRunner).

(WebCore::DatabaseTracker::deleteOrigin):

  • added IOSDeletionMode.

(WebCore::DatabaseTracker::deleteDatabaseFile):

  • added IOSDeletionMode, modified to actually delete if this is set.
  • Modules/webdatabase/DatabaseTracker.h:
    • added IOSDeletionMode.
  • platform/sql/SQLiteDatabase.cpp:

(WebCore::SQLiteDatabase::open):

  • call prepareAndStep(), only check for SQLITE_ROW result.
  • platform/sql/SQLiteFileSystem.cpp:

(WebCore::SQLiteFileSystem::openDatabase):

  • should set SQLITE_OPEN_AUTOPROXY flag when opening database.

Source/WebKit/mac:

  • Storage/WebDatabaseManagerPrivate.h:
    • renamed deleteAllDatabases -> deleteAllDatabasesImmediately.

Source/WebKit/win:

  • WebDatabaseManager.cpp:

(WebDatabaseManager::deleteAllDatabases):

  • renamed deleteAllDatabases -> deleteAllDatabasesImmediately.

Source/WebKit2:

  • WebProcess/InjectedBundle/API/c/WKBundle.cpp:

(WKBundleClearAllDatabases):

  • renamed deleteAllDatabases -> deleteAllDatabasesImmediately.
1:00 PM Changeset in webkit [199308] by Joseph Pecoraro
  • 4 edits in trunk/Source/WebInspectorUI

Web Inspector: HeapSnapshot instance property path popover should include a descriptive header
https://bugs.webkit.org/show_bug.cgi?id=156431
<rdar://problem/25633594>

Reviewed by Timothy Hatcher.

  • Localizations/en.lproj/localizedStrings.js:
  • UserInterface/Views/HeapSnapshotInstanceDataGridNode.js:

(WebInspector.HeapSnapshotInstanceDataGridNode.prototype._mouseoverHandler.appendTitle):
Title for the popover. Because localization may change the location of the @1234
in the string, localize first with a placeholder, and then replace the placeholder
with the @1234 link.

(WebInspector.HeapSnapshotInstanceDataGridNode.prototype._mouseoverHandler.appendPath):
Give the table a container for extra padding.

(WebInspector.HeapSnapshotInstanceDataGridNode.prototype._mouseoverHandler.appendPathRow):
Do not include the space before @1234 as part of the clickable link.

(WebInspector.HeapSnapshotInstanceDataGridNode.prototype._mouseoverHandler):
Include a title when the popover shows a root path.

  • UserInterface/Views/HeapSnapshotInstancesContentView.css:

(.heap-snapshot-instance-popover-content > .title):
(.heap-snapshot-instance-popover-content):
(.heap-snapshot-instance-popover-content > .table-container):
(.heap-snapshot-instance-popover-content table):
Provide styles for the title. Let the title extend across the entire
popover horizontally, but pad the table so that it appears more
centered under the title. Because the table has border collapse we have
to wrap it in a container to give it back the padding we want.

12:52 PM Changeset in webkit [199307] by Alan Bujtas
  • 4 edits in trunk/Source/WebCore

Simplify InlineTextBox::selectionStartEnd()
https://bugs.webkit.org/show_bug.cgi?id=156459

Reviewed by Darin Adler.

No change in functionality.

  • rendering/InlineTextBox.cpp:

(WebCore::InlineTextBox::selectionState):
(WebCore::InlineTextBox::paint):
(WebCore::InlineTextBox::selectionStartEnd):
(WebCore::InlineTextBox::paintSelection):
(WebCore::InlineTextBox::paintCompositionBackground):

  • rendering/InlineTextBox.h:
  • rendering/svg/SVGInlineTextBox.cpp:

(WebCore::SVGInlineTextBox::paintSelectionBackground):
(WebCore::SVGInlineTextBox::paintText):

12:37 PM Changeset in webkit [199306] by bshafiei@apple.com
  • 2 edits in tags/Safari-602.1.27.0.1/Source/WebKit2

Merged r199301. rdar://problem/25628133

12:33 PM Changeset in webkit [199305] by bshafiei@apple.com
  • 5 edits in tags/Safari-602.1.27.0.1/Source

Versioning.

12:31 PM Changeset in webkit [199304] by Alan Bujtas
  • 4 edits
    2 adds in trunk

REGRESSION (r193857): Text selection causes text to disappear.
https://bugs.webkit.org/show_bug.cgi?id=156448
rdar://problem/25578952

Reviewed by Simon Fraser.

Apparently when the end position of the selection range is smaller than the start position, we need
to repaint the entire text as it indicates selection clearing.

Source/WebCore:

Test: fast/text/text-disappear-on-deselect.html

  • rendering/TextPainter.cpp:

(WebCore::TextPainter::paintText):

LayoutTests:

  • fast/text/text-disappear-on-deselect-expected.html: Added.
  • fast/text/text-disappear-on-deselect.html: Added.
12:31 PM Changeset in webkit [199303] by fpizlo@apple.com
  • 21 edits in trunk/Source/JavaScriptCore

It should be possible to edit StructureStubInfo without recompiling the world
https://bugs.webkit.org/show_bug.cgi?id=156470

Reviewed by Keith Miller.

This change makes it less painful to make changes to the IC code. It used to be that any
change to StructureStubInfo caused every JIT-related file to get recompiled. Now only a
smaller set of files - ones that actually peek into StructureStubInfo - will recompile. This
is mainly because CodeBlock.h no longer includes StructureStubInfo.h.

  • bytecode/ByValInfo.h:
  • bytecode/CodeBlock.cpp:
  • bytecode/CodeBlock.h:
  • bytecode/GetByIdStatus.cpp:
  • bytecode/GetByIdStatus.h:
  • bytecode/PutByIdStatus.cpp:
  • bytecode/PutByIdStatus.h:
  • bytecode/StructureStubInfo.h:

(JSC::getStructureStubInfoCodeOrigin):

  • dfg/DFGByteCodeParser.cpp:
  • dfg/DFGJITCompiler.cpp:
  • dfg/DFGOSRExitCompilerCommon.cpp:
  • dfg/DFGSpeculativeJIT.h:
  • ftl/FTLLowerDFGToB3.cpp:
  • ftl/FTLSlowPathCall.h:
  • jit/IntrinsicEmitter.cpp:
  • jit/JITInlineCacheGenerator.cpp:
  • jit/JITInlineCacheGenerator.h:
  • jit/JITOperations.cpp:
  • jit/JITPropertyAccess.cpp:
  • jit/JITPropertyAccess32_64.cpp:
12:20 PM Changeset in webkit [199302] by bshafiei@apple.com
  • 1 copy in tags/Safari-602.1.27.0.1

New tag.

12:06 PM Changeset in webkit [199301] by dbates@webkit.org
  • 2 edits in trunk/Source/WebKit2

REGRESSION (r198933): Unable to login to Google account from Internet Accounts preference pane
https://bugs.webkit.org/show_bug.cgi?id=156447
<rdar://problem/25628133>

Reviewed by Anders Carlsson.

Temporarily perform code signing verification only for Mac App Store- and Apple Developer- signed apps.

  • Shared/mac/ChildProcessMac.mm:

(WebKit::codeSigningIdentifierForProcess):

12:04 PM Changeset in webkit [199300] by gskachkov@gmail.com
  • 19 edits in trunk/Source/JavaScriptCore

Remove NewArrowFunction from DFG IR
https://bugs.webkit.org/show_bug.cgi?id=156439

Reviewed by Saam Barati.

It seems that NewArrowFunction was left in DFG IR during refactoring by mistake.

  • dfg/DFGAbstractInterpreterInlines.h:
  • dfg/DFGClobberize.h:

(JSC::DFG::clobberize):

  • dfg/DFGClobbersExitState.cpp:
  • dfg/DFGDoesGC.cpp:
  • dfg/DFGFixupPhase.cpp:
  • dfg/DFGMayExit.cpp:
  • dfg/DFGNode.h:

(JSC::DFG::Node::convertToPhantomNewFunction):

  • dfg/DFGNodeType.h:
  • dfg/DFGObjectAllocationSinkingPhase.cpp:
  • dfg/DFGPredictionPropagationPhase.cpp:
  • dfg/DFGSafeToExecute.h:
  • dfg/DFGSpeculativeJIT.cpp:

(JSC::DFG::SpeculativeJIT::compileNewFunction):

  • dfg/DFGSpeculativeJIT32_64.cpp:
  • dfg/DFGSpeculativeJIT64.cpp:
  • dfg/DFGStoreBarrierInsertionPhase.cpp:
  • dfg/DFGStructureRegistrationPhase.cpp:
  • ftl/FTLCapabilities.cpp:
  • ftl/FTLLowerDFGToB3.cpp:

(JSC::FTL::DFG::LowerDFGToB3::compileNewFunction):

12:00 PM Changeset in webkit [199299] by oliver@apple.com
  • 21 edits in trunk

Remove compile time define for SEPARATED_HEAP
https://bugs.webkit.org/show_bug.cgi?id=155508

Reviewed by Mark Lam.

Source/JavaScriptCore:

Remove the SEPARATED_HEAP compile time flag. The separated
heap is available, but off by default, on x86_64, ARMv7, and
ARM64.

Working through the issues that happened last time essentially
required implementing the ARMv7 path for the separated heap
just so I could find all the ways it was going wrong.

We fixed all the logic by making the branch and jump logic in
the linker and assemblers take two parameters, the location to
write to, and the location we'll actually be writing to. We
need to do this because it's no longer sufficient to compute
jumps relative to region the linker is writing to.

The repatching jump, branch, and call functions only need the
executable address as the patching is performed directly using
performJITMemcpy function which works in terms of the executable
address.

There is no performance impact on jsc-benchmarks with the separate
heap either emabled or disabled.

  • Configurations/FeatureDefines.xcconfig:
  • assembler/ARM64Assembler.h:

(JSC::ARM64Assembler::linkJump):
(JSC::ARM64Assembler::linkCall):
(JSC::ARM64Assembler::relinkJump):
(JSC::ARM64Assembler::relinkCall):
(JSC::ARM64Assembler::link):
(JSC::ARM64Assembler::linkJumpOrCall):
(JSC::ARM64Assembler::linkCompareAndBranch):
(JSC::ARM64Assembler::linkConditionalBranch):
(JSC::ARM64Assembler::linkTestAndBranch):
(JSC::ARM64Assembler::relinkJumpOrCall):

  • assembler/ARMv7Assembler.h:

(JSC::ARMv7Assembler::revertJumpTo_movT3movtcmpT2):
(JSC::ARMv7Assembler::revertJumpTo_movT3):
(JSC::ARMv7Assembler::link):
(JSC::ARMv7Assembler::linkJump):
(JSC::ARMv7Assembler::relinkJump):
(JSC::ARMv7Assembler::repatchCompact):
(JSC::ARMv7Assembler::replaceWithJump):
(JSC::ARMv7Assembler::replaceWithLoad):
(JSC::ARMv7Assembler::replaceWithAddressComputation):
(JSC::ARMv7Assembler::setInt32):
(JSC::ARMv7Assembler::setUInt7ForLoad):
(JSC::ARMv7Assembler::isB):
(JSC::ARMv7Assembler::isBX):
(JSC::ARMv7Assembler::isMOV_imm_T3):
(JSC::ARMv7Assembler::isMOVT):
(JSC::ARMv7Assembler::isNOP_T1):
(JSC::ARMv7Assembler::isNOP_T2):
(JSC::ARMv7Assembler::linkJumpT1):
(JSC::ARMv7Assembler::linkJumpT2):
(JSC::ARMv7Assembler::linkJumpT3):
(JSC::ARMv7Assembler::linkJumpT4):
(JSC::ARMv7Assembler::linkConditionalJumpT4):
(JSC::ARMv7Assembler::linkBX):
(JSC::ARMv7Assembler::linkConditionalBX):
(JSC::ARMv7Assembler::linkJumpAbsolute):

  • assembler/LinkBuffer.cpp:

(JSC::LinkBuffer::copyCompactAndLinkCode):

  • assembler/MacroAssemblerARM64.h:

(JSC::MacroAssemblerARM64::link):

  • assembler/MacroAssemblerARMv7.h:

(JSC::MacroAssemblerARMv7::link):

  • jit/ExecutableAllocator.h:

(JSC::performJITMemcpy):

  • jit/ExecutableAllocatorFixedVMPool.cpp:

(JSC::FixedVMPoolExecutableAllocator::initializeSeparatedWXHeaps):
(JSC::FixedVMPoolExecutableAllocator::jitWriteThunkGenerator):
(JSC::FixedVMPoolExecutableAllocator::genericWriteToJITRegion):
(JSC::FixedVMPoolExecutableAllocator::FixedVMPoolExecutableAllocator): Deleted.

  • runtime/Options.cpp:

(JSC::recomputeDependentOptions):

  • runtime/Options.h:

Source/WebCore:

  • Configurations/FeatureDefines.xcconfig:

Source/WebKit/mac:

  • Configurations/FeatureDefines.xcconfig:

Source/WebKit2:

  • Configurations/FeatureDefines.xcconfig:

Source/WTF:

  • wtf/FeatureDefines.h:
  • wtf/Platform.h:
11:49 AM Changeset in webkit [199298] by Chris Dumez
  • 15 edits
    2 deletes in trunk/Source/WebCore

Merge AttributedDOMTokenList into DOMTokenList
https://bugs.webkit.org/show_bug.cgi?id=156468

Reviewed by Ryosuke Niwa.

Merge AttributedDOMTokenList into DOMTokenList to simplify the code.
DOMTokenList is not constructible and AttributedDOMTokenList is its
only constructible subclass after r196123.

  • CMakeLists.txt:
  • WebCore.xcodeproj/project.pbxproj:
  • dom/Element.cpp:

(WebCore::Element::classList):

  • dom/ElementRareData.h:

(WebCore::ElementRareData::classList):
(WebCore::ElementRareData::setClassList):

  • html/AttributeDOMTokenList.cpp: Removed.
  • html/AttributeDOMTokenList.h: Removed.
  • html/DOMTokenList.cpp:

(WebCore::DOMTokenList::DOMTokenList):
(WebCore::DOMTokenList::attributeValueChanged):
(WebCore::DOMTokenList::updateAfterTokenChange):

  • html/DOMTokenList.h:

(WebCore::DOMTokenList::ref):
(WebCore::DOMTokenList::deref):
(WebCore::DOMTokenList::element):
(WebCore::DOMTokenList::~DOMTokenList): Deleted.
(WebCore::DOMTokenList::updateAfterTokenChange): Deleted.

  • html/HTMLAnchorElement.cpp:

(WebCore::HTMLAnchorElement::relList):

  • html/HTMLAnchorElement.h:
  • html/HTMLIFrameElement.cpp:

(WebCore::HTMLIFrameElement::sandbox):

  • html/HTMLIFrameElement.h:
  • html/HTMLLinkElement.cpp:

(WebCore::HTMLLinkElement::sizes):
(WebCore::HTMLLinkElement::relList):

  • html/HTMLLinkElement.h:
  • html/HTMLOutputElement.cpp:

(WebCore::HTMLOutputElement::htmlFor):

  • html/HTMLOutputElement.h:
11:20 AM Changeset in webkit [199297] by fpizlo@apple.com
  • 9 edits in trunk/Source/JavaScriptCore

Clean up how we reason about the states of AccessCases
https://bugs.webkit.org/show_bug.cgi?id=156454

Reviewed by Mark Lam.

Currently when we add an AccessCase to a PolymorphicAccess stub, we regenerate the stub.
That means that as we grow a stub to have N cases, we will do O(N2) generation work. I want
to explore buffering AccessCases so that we can do O(N) generation work instead. But to
before I go there, I want to make sure that the statefulness of AccessCase makes sense. So,
I broke it down into three different states and added assertions about the transitions. I
also broke out a separate operation called AccessCase::commit(), which is the work that
cannot be buffered since there cannot be any JS effects between when the AccessCase was
created and when we do the work in commit().

This opens up a fairly obvious path to buffering AccessCases: add them to the list without
regenerating. Then when we do eventually trigger regeneration, those cases will get cloned
and generated automagically. This patch doesn't implement this technique yet, but gives us
an opportunity to independently test the scaffolding necessary to do it.

This is perf-neutral on lots of tests.

  • bytecode/PolymorphicAccess.cpp:

(JSC::AccessGenerationResult::dump):
(JSC::AccessCase::clone):
(JSC::AccessCase::commit):
(JSC::AccessCase::guardedByStructureCheck):
(JSC::AccessCase::dump):
(JSC::AccessCase::generateWithGuard):
(JSC::AccessCase::generate):
(JSC::AccessCase::generateImpl):
(JSC::PolymorphicAccess::regenerateWithCases):
(JSC::PolymorphicAccess::regenerate):
(WTF::printInternal):

  • bytecode/PolymorphicAccess.h:

(JSC::AccessCase::type):
(JSC::AccessCase::state):
(JSC::AccessCase::offset):
(JSC::AccessCase::viaProxy):
(JSC::AccessCase::callLinkInfo):

  • bytecode/StructureStubInfo.cpp:

(JSC::StructureStubInfo::addAccessCase):

  • bytecode/Watchpoint.h:
  • dfg/DFGOperations.cpp:
  • jit/Repatch.cpp:

(JSC::repatchGetByID):
(JSC::repatchPutByID):
(JSC::repatchIn):

  • runtime/VM.cpp:

(JSC::VM::dumpRegExpTrace):
(JSC::VM::ensureWatchpointSetForImpureProperty):
(JSC::VM::registerWatchpointForImpureProperty):
(JSC::VM::addImpureProperty):

  • runtime/VM.h:
9:50 AM Changeset in webkit [199296] by Chris Dumez
  • 15 edits in trunk

DOMTokenList.contains() should not throw
https://bugs.webkit.org/show_bug.cgi?id=156453

Reviewed by Ryosuke Niwa.

LayoutTests/imported/w3c:

Re-sync dom/nodes/Element-classlist.html with upstream @26308720.

  • web-platform-tests/dom/nodes/Element-classlist-expected.txt:
  • web-platform-tests/dom/nodes/Element-classlist.html:

Source/WebCore:

DOMTokenList.contains() should not throw if the input token is invalid:
https://github.com/whatwg/dom/commit/6d3076e3cbcba662489b272a718bc6b8c0082a74

We now return false in such cases, instead of throwing, which should be
safe with regards to backward compatibility.

No new tests, already covered by existing tests.

  • html/DOMTokenList.cpp:

(WebCore::DOMTokenList::contains):

  • html/DOMTokenList.h:
  • html/DOMTokenList.idl:

LayoutTests:

Update existing layout tests now that DOMTokenList.contains() no longer
throws when called with an invalid token.

  • fast/dom/HTMLElement/class-list-expected.txt:
  • fast/dom/HTMLElement/class-list-quirks-expected.txt:
  • fast/dom/HTMLElement/script-tests/class-list.js:

(shouldThrowDOMException): Deleted.

  • fast/dom/HTMLOutputElement/dom-settable-token-list-expected.txt:
  • fast/dom/HTMLOutputElement/script-tests/dom-settable-token-list.js:

(shouldThrowDOMException): Deleted.

  • fast/dom/rel-list-expected.txt:
  • fast/dom/rel-list.html:
9:07 AM WebKitIDL edited by Chris Dumez
Add [ExportMacro] (diff)
8:45 AM MathML/Early_2016_Refactoring edited by fred.wang@free.fr
(diff)
8:38 AM Changeset in webkit [199295] by fred.wang@free.fr
  • 15 edits
    2 adds in trunk

Refactor RenderMathMLFraction layout to avoid using flexbox
https://bugs.webkit.org/show_bug.cgi?id=153917

Patch by Frederic Wang <fwang@igalia.com> on 2016-04-11
Reviewed by Sergio Villar Senin.

Source/WebCore:

Based on a patch by Alejandro G. Castro <alex@igalia.com>

Implement the layoutBlock method to handle the layout calculations
directly in the class. This also fixes parsing of absolute values for
linethickness attribute (e.g. 10px) and adds support for the AxisHeight
and FractionRuleThickness MATH parameters.

Test: mathml/opentype/fraction-line.html

  • accessibility/AccessibilityRenderObject.cpp:

(WebCore::AccessibilityRenderObject::mathLineThickness): Use the thickness relative to the
default line thickness since that's really what is expected by mathml-line-fraction.html

  • css/mathml.css: Remove flexbox properties for mfrac.

(mfrac): Deleted.
(mfrac > *): Deleted.
(mfrac[numalign="left"] > :first-child): Deleted.
(mfrac[numalign="right"] > :first-child): Deleted.
(mfrac[denomalign="left"] > :last-child): Deleted.
(mfrac[denomalign="right"] > :last-child): Deleted.
(mfrac > :first-child): Deleted.
(mfrac > :last-child): Deleted.
(mfrac): Deleted.

  • rendering/mathml/RenderMathMLBlock.cpp: Introduce a helper function to retrieve the math

axis height.
(WebCore::RenderMathMLBlock::mathAxisHeight):

  • rendering/mathml/RenderMathMLBlock.h: Declare mathAxisHeight.
  • rendering/mathml/RenderMathMLFraction.cpp:

(WebCore::RenderMathMLFraction::RenderMathMLFraction):
(WebCore::RenderMathMLFraction::parseAlignmentAttribute): Helper function to parse the align
attribute.
(WebCore::RenderMathMLFraction::isValid): Helper function to verify whether the child list
is valid with respect to the MathML specificitation.
(WebCore::RenderMathMLFraction::numerator): Helper function to retrieve the numerator.
(WebCore::RenderMathMLFraction::denominator): Helper function to retrieve the denominator.
(WebCore::RenderMathMLFraction::updateFromElement): Use the FractionRuleThickness parameter
when avaiable to calculate the default linethickness.
Fix computation of linethickness for absolute values (e.g. 10px), the default linethickness
must not be involved for such values.
We no longer need to manage style of anonymous wrappers.
(WebCore::RenderMathMLFraction::unembellishedOperator): Use the helper function and we no
longer care about anonymous wrappers.
(WebCore::RenderMathMLFraction::computePreferredLogicalWidths): Implement this function
without using flexbox.
(WebCore::RenderMathMLFraction::horizontalOffset): Helper function to get the horizontal
offsets of children depending of the alignment.
(WebCore::RenderMathMLFraction::layoutBlock): Implement this function without using flexbox.
(WebCore::RenderMathMLFraction::paint): Do not paint if the fraction is invalid. Use helper
function. Use the width of the renderer (instead of the one of the denominator) as the
length of the fraction bar.
(WebCore::RenderMathMLFraction::firstLineBaseline): Use the helper functions to get children
and axis height.
(WebCore::RenderMathMLFraction::paintChildren): Temporary function to remove in a
follow-up patch.
(WebCore::RenderMathMLFraction::fixChildStyle): Deleted. We no longer need to manage style
of anonymous wrappers.
(WebCore::RenderMathMLFraction::addChild): Deleted. We no longer need to manage
anonymous wrappers.
(WebCore::RenderMathMLFraction::styleDidChange): We no longer need to manage style of
anonymous wrappers.
(WebCore::RenderMathMLFraction::layout): Deleted.

  • rendering/mathml/RenderMathMLFraction.h: Replace lineThickness with relativeLineThickness,

as needed by the accessibility code. Update function and members declarations.

LayoutTests:

  • TestExpectations: No longer skip mathml/presentation/fractions-positions.html
  • mathml/opentype/fraction-line-expected.html: Added. New test to verify AxisHeight and

FractionRuleThickness parameters.

  • mathml/opentype/fraction-line.html: Added. New test to verify axis height and rule

thickness parameters.

  • mathml/presentation/fractions-linethickness-expected.html: Adjust the test to be sure that

the default rule thickness is 1px.

  • mathml/presentation/fractions-linethickness.html: Adjust the test to be sure that the

default rule thickness is 1px.

  • platform/gtk/mathml/presentation/roots-expected.txt: Update reference to take into account

changes in the render tree.

  • platform/ios-simulator/mathml/presentation/roots-expected.txt: Ditto
  • platform/mac/TestExpectations: Mark fraction-line and fractions-linethickness as

possibly failing since these tests require Latin Modern Math to work reliably.

  • platform/ios-simulator/TestExpectations: Ditto
5:46 AM Changeset in webkit [199294] by commit-queue@webkit.org
  • 25 edits
    1 copy
    2 deletes in trunk

Unreviewed, rolling out r199290.
https://bugs.webkit.org/show_bug.cgi?id=156465

broke 300 tests (Requested by mcatanzaro on #webkit).

Reverted changeset:

"Merge CG ImageSource and non CG ImageSource implementation in
one file"
https://bugs.webkit.org/show_bug.cgi?id=155456
http://trac.webkit.org/changeset/199290

5:12 AM MathML/Early_2016_Refactoring edited by fred.wang@free.fr
(diff)
5:11 AM Changeset in webkit [199293] by fred.wang@free.fr
  • 13 edits
    2 adds in trunk

Refactor RenderMathMLUnderOver layout functions to avoid using flexbox
https://bugs.webkit.org/show_bug.cgi?id=153742

Patch by Frederic Wang <fwang@igalia.com> on 2016-04-11
Reviewed by Sergio Villar Senin.

Source/WebCore:

Based on a patch by Javier Fernandez <jfernandez@igalia.com>

Refactor the UnderOver renderer to use its own layoutBlock method that
does all the layout calculations without considering the flexbox
restrictions.

  • css/mathml.css:

(mo, mfrac, munder, mover, munderover): Delete the underover elements from the line defining
the column direction.
(munder, mover, munderover): Deleted. This flexbox property is no longer needed.
(mover > :last-child, munderover > :last-child): Deleted. This flexbox property is no longer
needed.

  • rendering/mathml/RenderMathMLUnderOver.cpp:

(WebCore::RenderMathMLUnderOver::firstLineBaseline): Use ascentForChild.
(WebCore::RenderMathMLUnderOver::computeOperatorsHorizontalStretch): Avoid stretching
operators that are not stretchy.
(WebCore::RenderMathMLUnderOver::isValid): Helper function to ensure that the child list is
valid with respect to the MathML specification.
(WebCore::RenderMathMLUnderOver::base): Added. Helper function.
(WebCore::RenderMathMLUnderOver::under): Added. Helper function.
(WebCore::RenderMathMLUnderOver::over): Added. Helper function.
(WebCore::RenderMathMLUnderOver::computePreferredLogicalWidths): Added.
The preferred width is the maximum preferred width of the base, under and over scripts.
(WebCore::RenderMathMLUnderOver::horizontalOffset): Added, helper to calculate the
horizontal position of children (horizontally centered).
(WebCore::RenderMathMLUnderOver::layoutBlock): Added, it lays out the base, underscript and
overscript. It calculates the exact logical width, which may differ from the preferred width when
one child contains stretchy operators. It later sets the locations of children accordingly
and sets the heigth of the render element.
(WebCore::RenderMathMLUnderOver::paintChildren): Added, we have to use the usual traverse
instead of the one that comes from the flexbox. This will be removed in a follow-up patch.
(WebCore::RenderMathMLUnderOver::layout): Deleted.

  • rendering/mathml/RenderMathMLUnderOver.h: Added new functions definitions.

LayoutTests:

Apply some small adjustments to the expectations of MathML tests after
the refactoring of RenderMathMLUnderOver. We also add a test for
non-stretchy horizontal operators in underover.

  • platform/gtk/mathml/opentype/horizontal-expected.png:
  • platform/gtk/mathml/opentype/horizontal-expected.txt:
  • platform/gtk/mathml/opentype/opentype-stretchy-horizontal-expected.png:
  • platform/gtk/mathml/opentype/opentype-stretchy-horizontal-expected.txt:
  • platform/mac/mathml/opentype/opentype-stretchy-horizontal-expected.png:
  • platform/mac/mathml/opentype/opentype-stretchy-horizontal-expected.txt:
  • mathml/mn-as-list-item-assert.html: Move the test description out of the invalid munderover

so that it is still displayed.

  • mathml/mn-as-list-item-assert-expected.txt: Update the text expectation.
  • mathml/presentation/underover-nonstretchy-horizontal.html: Ensure that nonstretchy horizontal operators are not stretched in munderover.
  • mathml/presentation/underover-nonstretchy-horizontal-expected.html: Ditto.
3:59 AM Changeset in webkit [199292] by Carlos Garcia Campos
  • 7 edits
    3 adds in trunk

[GTK] Rework the theming code for GTK+ 3.20
https://bugs.webkit.org/show_bug.cgi?id=156333

Reviewed by Michael Catanzaro.

.:

Add a manual test to check how themed elements are rendered.

  • ManualTests/gtk/theme.html: Added.

Source/WebCore:

During the 3.19 GTK+ release cycle, the GTK+ css system was reworked, making themes and programs rendering
themed widgets, incompatible with the new system. We were trying to fix our rendering every time GTK+ broke
something, but we were just changing whatever it was needed to make our rendering look like current GTK+ with
the default theme Adwaita. This means that our rendering will be broken for other themes or that changes in
Adwaita can break our rendering. This solution was good enough to ensure WebKitGTK+ 2.12 looked good with GTK+
3.20, but it doesn't work in the long term. We need to ensure that our theming code honors the new GTK+ CSS
properties (max-width, min-width, margin, padding, border, ...) in all the cases, not only the cases where
Adwaita uses them like we currently do.
This patch splits all rendering methods to keep the current code for previous GTK+ versions and adds new code
for GTK+ >= 3.20 using the new RenderThemeGadget classes. This makes the code easier to read, since there aren't
ifdef blocks in the functions, and we ensure we don't break previous rendering.

  • PlatformGTK.cmake: Add new files to compilation.
  • html/shadow/SpinButtonElement.cpp:

(WebCore::SpinButtonElement::defaultEventHandler): Check the button layout used by the theme to decide the
current buttons state.

  • platform/gtk/RenderThemeGadget.cpp: Added.

(WebCore::RenderThemeGadget::create):
(WebCore::createStyleContext):
(WebCore::appendElementToPath):
(WebCore::RenderThemeGadget::RenderThemeGadget):
(WebCore::RenderThemeGadget::~RenderThemeGadget):
(WebCore::RenderThemeGadget::marginBox):
(WebCore::RenderThemeGadget::borderBox):
(WebCore::RenderThemeGadget::paddingBox):
(WebCore::RenderThemeGadget::contentsBox):
(WebCore::RenderThemeGadget::color):
(WebCore::RenderThemeGadget::backgroundColor):
(WebCore::RenderThemeGadget::minimumSize):
(WebCore::RenderThemeGadget::preferredSize):
(WebCore::RenderThemeGadget::render):
(WebCore::RenderThemeGadget::renderFocus):
(WebCore::RenderThemeBoxGadget::RenderThemeBoxGadget):
(WebCore::RenderThemeTextFieldGadget::RenderThemeTextFieldGadget):
(WebCore::RenderThemeTextFieldGadget::minimumSize):
(WebCore::RenderThemeToggleGadget::RenderThemeToggleGadget):
(WebCore::RenderThemeToggleGadget::render):
(WebCore::RenderThemeArrowGadget::RenderThemeArrowGadget):
(WebCore::RenderThemeArrowGadget::render):
(WebCore::RenderThemeIconGadget::RenderThemeIconGadget):
(WebCore::RenderThemeIconGadget::gtkIconSizeForPixelSize):
(WebCore::RenderThemeIconGadget::render):
(WebCore::RenderThemeIconGadget::minimumSize):

  • platform/gtk/RenderThemeGadget.h: Added.

(WebCore::RenderThemeGadget::context):

  • rendering/RenderTheme.h:

(WebCore::RenderTheme::innerSpinButtonLayout): Added this method to allow themes use a different layout for the
buttons.

  • rendering/RenderThemeGtk.cpp:

(WebCore::themeChangedCallback): Just moved this code to a common place.
(WebCore::RenderThemeGtk::RenderThemeGtk): Initialize the theme monitor in the constructor.
(WebCore::createStyleContext): Remove the render parts that are specific to GTK+ 3.20.
(WebCore::RenderThemeGtk::adjustRepaintRect): Moved inside a GTK+ < 3.20 ifdef block.
(WebCore::themePartStateFlags): Helper function to get the GtkStateFlags of a theme part for a given RenderObject.
(WebCore::shrinkToMinimumSizeAndCenterRectangle): Move this common code to a helper function.
(WebCore::setToggleSize):
(WebCore::paintToggle):
(WebCore::RenderThemeGtk::paintButton):
(WebCore::RenderThemeGtk::popupInternalPaddingBox):
(WebCore::RenderThemeGtk::paintMenuList):
(WebCore::RenderThemeGtk::adjustTextFieldStyle): For GTK+ 3.20 we need to ensure a minimum size for spin buttons,
so if the text field is for a spin button, we adjust the desired size here.
(WebCore::RenderThemeGtk::paintTextField): In GTK+ 3.20 the CSS gadgets used to render spin buttons are
different, so we check here if this is the entry of a spin button to use the right gadgets.
(WebCore::adjustSearchFieldIconStyle):
(WebCore::RenderThemeGtk::paintTextArea):
(WebCore::RenderThemeGtk::adjustSearchFieldResultsButtonStyle):
(WebCore::RenderThemeGtk::paintSearchFieldResultsButton):
(WebCore::RenderThemeGtk::adjustSearchFieldResultsDecorationPartStyle):
(WebCore::RenderThemeGtk::adjustSearchFieldCancelButtonStyle):
(WebCore::paintSearchFieldIcon):
(WebCore::RenderThemeGtk::paintSearchFieldResultsDecorationPart):
(WebCore::RenderThemeGtk::paintSearchFieldCancelButton):
(WebCore::centerRectVerticallyInParentInputElement): Moved inside a GTK+ < 3.20 ifdef block.
(WebCore::RenderThemeGtk::paintSliderTrack):
(WebCore::RenderThemeGtk::adjustSliderThumbSize):
(WebCore::RenderThemeGtk::paintSliderThumb):
(WebCore::RenderThemeGtk::progressBarRectForBounds): Ensure a minimum size of progress bars in GTK+ 3.20.
(WebCore::RenderThemeGtk::paintProgressBar):
(WebCore::RenderThemeGtk::innerSpinButtonLayout): Use an horizontal layout for spin buttons.
(WebCore::RenderThemeGtk::adjustInnerSpinButtonStyle):
(WebCore::RenderThemeGtk::paintInnerSpinButton):
(WebCore::styleColor):
(WebCore::RenderThemeGtk::paintMediaButton):

  • rendering/RenderThemeGtk.h:
2:13 AM Changeset in webkit [199291] by Antti Koivisto
  • 13 edits in trunk

Implement functional :host() pseudo class
https://bugs.webkit.org/show_bug.cgi?id=156397
<rdar://problem/25621445>

Reviewed by Darin Adler.

Source/WebCore:

We already support :host. Add functional syntax too.

  • css/CSSGrammar.y.in:

Parse functional :host().

  • css/CSSParser.cpp:

(WebCore::CSSParser::detectFunctionTypeToken):

  • css/CSSParserValues.cpp:

(WebCore::CSSParserSelector::parsePseudoClassHostFunctionSelector):

  • css/CSSParserValues.h:
  • css/ElementRuleCollector.cpp:

(WebCore::ElementRuleCollector::matchedRuleList):
(WebCore::ElementRuleCollector::addMatchedRule):

Factor some shared code here.

(WebCore::ElementRuleCollector::matchHostPseudoClassRules):

Instead of using the generic paths use a :host specific code path for matching.
This makes it easier to avoid :host matching when it shouldn't.

(WebCore::ElementRuleCollector::collectMatchingRulesForList):

  • css/ElementRuleCollector.h:
  • css/RuleSet.cpp:

(WebCore::computeMatchBasedOnRuleHash):

:host is always handled by the special matching path.

  • css/SelectorChecker.cpp:

(WebCore::SelectorChecker::match):
(WebCore::SelectorChecker::matchHostPseudoClass):

Add a function specifically for checking :host. In always fails on the normal code paths.
Check the argument selector if provided.

(WebCore::hasScrollbarPseudoElement):

  • css/SelectorChecker.h:

LayoutTests:

Enable, fix and expand the test.

  • fast/shadow-dom/css-scoping-shadow-host-functional-rule.html:
  • platform/mac/TestExpectations:
12:30 AM MathML edited by fred.wang@free.fr
Update Bugzilla links (diff)
12:29 AM Changeset in webkit [199290] by commit-queue@webkit.org
  • 25 edits
    2 adds
    1 delete in trunk

Merge CG ImageSource and non CG ImageSource implementation in one file
https://bugs.webkit.org/show_bug.cgi?id=155456

Patch by Said Abou-Hallawa <sabouhallawa@apple,com> on 2016-04-11
Reviewed by Darin Adler.
Source/WebCore:

ImageSource for CG and CG code paths look very similar. All the platform
specific code can be moved to ImageDecoder classes for CG and non CG. And
we can have the ImageSource be platform independent and we get rid of
ImageSourceCG.cpp.

Test: fast/images/image-subsampling.html

  • CMakeLists.txt:
  • PlatformAppleWin.cmake:
  • PlatformMac.cmake:
  • WebCore.xcodeproj/project.pbxproj:

Delete ImageSourceCG.cpp form all make files and add ImageSource.cpp to
CMakeLists.txt.

  • platform/Cursor.cpp:

(WebCore::determineHotSpot):

  • platform/graphics/BitmapImage.cpp:

(WebCore::BitmapImage::hotSpot):
(WebCore::BitmapImage::getHotSpot): Deleted.

  • platform/graphics/BitmapImage.h:
  • platform/graphics/Image.h:

(WebCore::Image::hotSpot):
(WebCore::Image::getHotSpot): Deleted.
Rename getHotSpot() to hotSpot() and change it to return Optional<IntPoint>.

  • platform/graphics/ImageSource.cpp:

(WebCore::ImageSource::~ImageSource): Remove clear(true) call. It does nothing.
(WebCore::ImageSource::clearFrameBufferCache): A wrapper which calls ImageDecoder::clearFrameBufferCache().
(WebCore::ImageSource::clear): Calls clearFrameBufferCache() which will do nothing for CG.

(WebCore::ImageSource::ensureDecoderIsCreated): Change SharedBuffer* to
const SharedBuffer& and remove the call to ImageDecoder::setMaxNumPixels().
The value of const static int CG ImageDecoder::m_maxNumPixels will be set
based on IMAGE_DECODER_DOWN_SAMPLING.

(WebCore::ImageSource::setData): Pass SharedBuffer& to the underlying functions.

(WebCore::ImageSource::calculateMaximumSubsamplingLevel): Returns the maximum
subsampling level allowed for an image.

(WebCore::ImageSource::subsamplingLevelForScale): Converts from a scale to
SubsamplingLevel taking into consideration the maximumSubsamplingLevel for
a particular image.

(WebCore::ImageSource::bytesDecodedToDetermineProperties): Returns the number
of encoded bytes which can determine the image properties. For non CG it's
zero. For CG it is a maximum value which can be corrected later.

(WebCore::ImageSource::isSizeAvailable):
(WebCore::ImageSource::sizeRespectingOrientation):
(WebCore::ImageSource::frameCount):
(WebCore::ImageSource::repetitionCount):
(WebCore::ImageSource::filenameExtension):
(WebCore::ImageSource::getHotSpot):
(WebCore::ImageSource::frameIsCompleteAtIndex):
(WebCore::ImageSource::frameHasAlphaAtIndex):
(WebCore::ImageSource::allowSubsamplingOfFrameAtIndex):
(WebCore::ImageSource::frameSizeAtIndex):
(WebCore::ImageSource::frameBytesAtIndex):
(WebCore::ImageSource::frameDurationAtIndex):
(WebCore::ImageSource::orientationAtIndex):
(WebCore::ImageSource::createFrameImageAtIndex):
These are wrappers for the ImageDecoder APIs. The purpose of these functions
is to ensure the ImageDecoder is created.

(WebCore::ImageSource::dump): Called from BitmapImage::dump().

(WebCore::ImageSource::getHotSpot): Deleted.

  • platform/graphics/ImageSource.h:

(WebCore::ImageSource::setAllowSubsampling): Called from BitmapImage::setAllowSubsampling().

(WebCore::ImageSource::maxPixelsPerDecodedImage): Deleted.
(WebCore::ImageSource::setMaxPixelsPerDecodedImage): Deleted.
Setting maxPixelsPerDecodedImage was moved to the non CG ImageDecoder.

  • platform/graphics/cg/ImageDecoderCG.cpp:

(WebCore::ImageDecoder::setData): Change SharedBuffer* to SharedBuffer&.

(WebCore::ImageDecoder::subsamplingLevelForScale): Deleted.
The code was moved to ImageSource::subsamplingLevelForScale().

  • platform/graphics/cg/ImageDecoderCG.h:

(WebCore::ImageDecoder::create): Make the prototype of this function
suitable for CG and non CG cases.
(WebCore::ImageDecoder::clearFrameBufferCache): Empty functions for CG.

  • platform/graphics/cg/ImageSourceCG.cpp: Removed.
  • platform/image-decoders/ImageDecoder.cpp:

(WebCore::ImageDecoder::frameIsCompleteAtIndex): A mew function to return
whether the frame decoding is complete or not.

(WebCore::ImageDecoder::frameHasAlphaAtIndex): Simplify the logic.

(WebCore::ImageDecoder::frameDurationAtIndex): The code was moved from
ImageSource::frameDurationAtIndex() in ImageSource.cpp.

(WebCore::ImageDecoder::createFrameImageAtIndex): The code was moved from
ImageSource::createFrameImageAtIndex() in ImageSource.cpp.

  • platform/image-decoders/ImageDecoder.h:

(WebCore::ImageDecoder::ImageDecoder): Initialize the members in class.
(WebCore::ImageDecoder::~ImageDecoder): Fix the braces style.
(WebCore::ImageDecoder::setData): Change the type of the argument from
SharedBuffer* to SharedBuffer&.
(WebCore::ImageDecoder::frameSizeAtIndex): Add the argument SubsamplingLevel
so it can have the same prototype as CG.
(WebCore::ImageDecoder::orientationAtIndex): Rename it to the same of CG.

(WebCore::ImageDecoder::allowSubsamplingOfFrameAtIndex):
(WebCore::ImageDecoder::bytesDecodedToDetermineProperties):
(WebCore::ImageDecoder::subsamplingLevelForScale): Add these functions
and return the default values so we do not have to add directive compiled
non CG blocks in ImageSource.cpp.

(WebCore::ImageDecoder::hotSpot): Return Optional<IntPoint>.

(WebCore::ImageDecoder::orientation): Deleted.
(WebCore::ImageDecoder::setMaxNumPixels): Deleted.

  • platform/image-decoders/bmp/BMPImageDecoder.cpp:

(WebCore::BMPImageDecoder::setData):

  • platform/image-decoders/bmp/BMPImageDecoder.h:
  • platform/image-decoders/gif/GIFImageDecoder.cpp:

(WebCore::GIFImageDecoder::setData):
(WebCore::GIFImageDecoder::decode):

  • platform/image-decoders/gif/GIFImageDecoder.h:
  • platform/image-decoders/gif/GIFImageReader.h:

(GIFImageReader::setData):

  • platform/image-decoders/ico/ICOImageDecoder.cpp:

(WebCore::ICOImageDecoder::setData):
Use reference SharedBuffer instead of pointer SharedBuffer.

(WebCore::ICOImageDecoder::hotSpot):
(WebCore::ICOImageDecoder::hotSpotAtIndex):
Change hotSpot() to return Optional<IntPoint>.

  • platform/image-decoders/ico/ICOImageDecoder.h:

(WebCore::ICOImageDecoder::setDataForPNGDecoderAtIndex):
Pass reference SharedBuffer instead of pointer SharedBuffer.

Source/WebKit2:

  • UIProcess/API/efl/EwkView.cpp:

(EwkView::setCursor):
Replace the call to Image::getHotSpot() by Image::hotSpot().

LayoutTests:

Add a test for image sub-sampling. The image subsampling is enabled by
default for iOS platform only. But it can be explicitly enabled through
the setting ImageSubsamplingEnabled.

  • fast/images/image-subsampling-expected.html: Added.
  • fast/images/image-subsampling.html: Added.
12:28 AM Changeset in webkit [199289] by commit-queue@webkit.org
  • 28 edits in trunk

[CMake] Make FOLDER property INHERITED
https://bugs.webkit.org/show_bug.cgi?id=156460

Patch by Fujii Hironori <Hironori.Fujii@jp.sony.com> on 2016-04-11
Reviewed by Brent Fulgham.

.:

Some CMake targets are not setting the FOLDER property. This causes the
generated projects to be displayed in the top-level folder of the solution.

Making the FOLDER property INHERITED ensures that all the targets
are placed in their proper directories.

  • Source/cmake/OptionsCommon.cmake:

Define FOLDER property as a inherited property.

  • Source/cmake/WebKitMacros.cmake:

Do not set FOLDER target property.

Source/bmalloc:

  • CMakeLists.txt:

Set FOLDER property as a directory property not a target property

Source/JavaScriptCore:

  • CMakeLists.txt:
  • shell/CMakeLists.txt:
  • shell/PlatformWin.cmake:

Set FOLDER property as a directory property not a target property

Source/ThirdParty/ANGLE:

  • CMakeLists.txt:

Set FOLDER property as a directory property not a target property

Source/WebCore:

  • CMakeLists.txt:

Set FOLDER property as a directory property not a target property

Source/WebKit:

  • CMakeLists.txt:
  • PlatformWin.cmake:

Set FOLDER property as a directory property not a target property

Source/WebKit2:

  • CMakeLists.txt:

Set FOLDER property as a directory property not a target property

Source/WTF:

  • CMakeLists.txt:

Set FOLDER directory property

Tools:

  • CMakeLists.txt:
  • DumpRenderTree/CMakeLists.txt:
  • DumpRenderTree/PlatformWin.cmake:
  • ImageDiff/CMakeLists.txt:
  • MiniBrowser/efl/CMakeLists.txt:
  • MiniBrowser/gtk/CMakeLists.txt:
  • MiniBrowser/win/CMakeLists.txt:

Set FOLDER property as a directory property not a target property

12:22 AM MathML/Early_2016_Refactoring edited by fred.wang@free.fr
(diff)

Apr 10, 2016:

5:10 PM Changeset in webkit [199288] by commit-queue@webkit.org
  • 3 edits in trunk/Tools

[Tools] correctly check for braces in multiline branches in macro definition
https://bugs.webkit.org/show_bug.cgi?id=156441

Patch by Caitlin Potter <caitp@igalia.com> on 2016-04-10
Reviewed by Darin Adler.

Prevents emitting whitespace/braces warning for code like the
following:

`
#define MACRO(x) \

if (x) { \

doTheThing(); \
continue; \

}

`

  • Scripts/webkitpy/style/checkers/cpp.py:

(check_braces):

  • Scripts/webkitpy/style/checkers/cpp_unittest.py:

(WebKitStyleTest.test_line_breaking):

12:04 PM Changeset in webkit [199287] by weinig@apple.com
  • 2 edits in trunk/Source/WebCore

Fix the build.

  • platform/graphics/avfoundation/objc/MediaPlaybackTargetPickerMac.mm:

(WebCore::MediaPlaybackTargetPickerMac::showPlaybackTargetPicker):

11:48 AM Changeset in webkit [199286] by weinig@apple.com
  • 39 edits in trunk/Source

Remove support for custom target picker actions
<rdar://problem/24987783>
https://bugs.webkit.org/show_bug.cgi?id=156434

Reviewed by Eric Carlson.

This mostly entailed rolling out r197429 and r197569.

Source/WebCore:

  • Modules/mediasession/WebMediaSessionManager.cpp:

(WebCore::WebMediaSessionManager::removeAllPlaybackTargetPickerClients):
(WebCore::WebMediaSessionManager::showPlaybackTargetPicker):
(WebCore::WebMediaSessionManager::clientStateDidChange):
(WebCore::WebMediaSessionManager::externalOutputDeviceAvailableDidChange):
(WebCore::WebMediaSessionManager::configureNewClients):
(WebCore::WebMediaSessionManager::customPlaybackActionSelected): Deleted.

  • Modules/mediasession/WebMediaSessionManager.h:
  • Modules/mediasession/WebMediaSessionManagerClient.h:
  • dom/Document.cpp:

(WebCore::Document::removePlaybackTargetPickerClient):
(WebCore::Document::showPlaybackTargetPicker):
(WebCore::Document::playbackTargetPickerClientStateDidChange):
(WebCore::Document::setShouldPlayToPlaybackTarget):
(WebCore::Document::customPlaybackActionSelected): Deleted.

  • dom/Document.h:
  • html/HTMLMediaElement.cpp:

(WebCore::HTMLMediaElement::enqueuePlaybackTargetAvailabilityChangedEvent):
(WebCore::HTMLMediaElement::setShouldPlayToPlaybackTarget):
(WebCore::HTMLMediaElement::webkitCurrentPlaybackTargetIsWireless):
(WebCore::HTMLMediaElement::customPlaybackActionSelected): Deleted.
(WebCore::HTMLMediaElement::playbackTargetPickerCustomActionName): Deleted.

  • html/HTMLMediaElement.h:
  • html/MediaElementSession.cpp:

(WebCore::MediaElementSession::showPlaybackTargetPicker):
(WebCore::MediaElementSession::hasWirelessPlaybackTargets):
(WebCore::MediaElementSession::setShouldPlayToPlaybackTarget):
(WebCore::MediaElementSession::mediaStateDidChange):
(WebCore::MediaElementSession::customPlaybackActionSelected): Deleted.

  • html/MediaElementSession.h:
  • page/ChromeClient.h:
  • page/Page.cpp:

(WebCore::Page::removePlaybackTargetPickerClient):
(WebCore::Page::showPlaybackTargetPicker):
(WebCore::Page::setShouldPlayToPlaybackTarget):
(WebCore::Page::ensureTestTrigger):
(WebCore::Page::customPlaybackActionSelected): Deleted.

  • page/Page.h:

(WebCore::Page::testTrigger):

  • platform/audio/PlatformMediaSession.h:

(WebCore::PlatformMediaSessionClient::canPlayToWirelessPlaybackTarget):
(WebCore::PlatformMediaSessionClient::isPlayingToWirelessPlaybackTarget):
(WebCore::PlatformMediaSessionClient::setShouldPlayToPlaybackTarget):
(WebCore::PlatformMediaSessionClient::customPlaybackActionSelected): Deleted.

  • platform/graphics/MediaPlaybackTargetClient.h:
  • platform/graphics/MediaPlaybackTargetPicker.cpp:

(WebCore::MediaPlaybackTargetPicker::pendingActionTimerFired):
(WebCore::MediaPlaybackTargetPicker::addPendingAction):
(WebCore::MediaPlaybackTargetPicker::showPlaybackTargetPicker):

  • platform/graphics/MediaPlaybackTargetPicker.h:

(WebCore::MediaPlaybackTargetPicker::availableDevicesDidChange):
(WebCore::MediaPlaybackTargetPicker::currentDeviceDidChange):
(WebCore::MediaPlaybackTargetPicker::Client::customPlaybackActionSelected): Deleted.
(WebCore::MediaPlaybackTargetPicker::customPlaybackActionSelected): Deleted.

  • platform/graphics/avfoundation/objc/MediaPlaybackTargetPickerMac.h:
  • platform/graphics/avfoundation/objc/MediaPlaybackTargetPickerMac.mm:

(WebCore::MediaPlaybackTargetPickerMac::devicePicker):
(WebCore::MediaPlaybackTargetPickerMac::showPlaybackTargetPicker):

  • platform/mac/WebVideoFullscreenInterfaceMac.h:
  • platform/mac/WebVideoFullscreenInterfaceMac.mm:

(WebCore::WebVideoFullscreenInterfaceMac::preparedToReturnToInline):
(WebCore::WebVideoFullscreenInterfaceMac::setVideoDimensions):
(WebCore::WebVideoFullscreenInterfaceMac::setExternalPlayback): Deleted.

  • platform/mock/MediaPlaybackTargetPickerMock.cpp:

(WebCore::MediaPlaybackTargetPickerMock::timerFired):
(WebCore::MediaPlaybackTargetPickerMock::showPlaybackTargetPicker):

  • platform/mock/MediaPlaybackTargetPickerMock.h:
  • platform/spi/cocoa/AVKitSPI.h:

Source/WebKit/mac:

  • WebCoreSupport/WebChromeClient.h:
  • WebCoreSupport/WebChromeClient.mm:

(WebChromeClient::removePlaybackTargetPickerClient):
(WebChromeClient::showPlaybackTargetPicker):

  • WebView/WebMediaPlaybackTargetPicker.h:
  • WebView/WebMediaPlaybackTargetPicker.mm:

(WebMediaPlaybackTargetPicker::removePlaybackTargetPickerClient):
(WebMediaPlaybackTargetPicker::showPlaybackTargetPicker):
(WebMediaPlaybackTargetPicker::playbackTargetPickerClientStateDidChange):
(WebMediaPlaybackTargetPicker::setShouldPlayToPlaybackTarget):
(WebMediaPlaybackTargetPicker::invalidate):
(WebMediaPlaybackTargetPicker::customPlaybackActionSelected): Deleted.

  • WebView/WebView.mm:

(-[WebView _showPlaybackTargetPicker:location:hasVideo:]):
(-[WebView _playbackTargetPickerClientStateDidChange:state:]):

Source/WebKit2:

  • UIProcess/WebPageProxy.cpp:

(WebKit::WebPageProxy::removePlaybackTargetPickerClient):
(WebKit::WebPageProxy::showPlaybackTargetPicker):
(WebKit::WebPageProxy::playbackTargetPickerClientStateDidChange):
(WebKit::WebPageProxy::setShouldPlayToPlaybackTarget):
(WebKit::WebPageProxy::didChangeBackgroundColor):
(WebKit::WebPageProxy::customPlaybackActionSelected): Deleted.

  • UIProcess/WebPageProxy.h:
  • UIProcess/WebPageProxy.messages.in:
  • WebProcess/WebCoreSupport/WebChromeClient.cpp:

(WebKit::WebChromeClient::removePlaybackTargetPickerClient):
(WebKit::WebChromeClient::showPlaybackTargetPicker):
(WebKit::WebChromeClient::playbackTargetPickerClientStateDidChange):

  • WebProcess/WebCoreSupport/WebChromeClient.h:
  • WebProcess/WebPage/WebPage.h:
  • WebProcess/WebPage/WebPage.messages.in:
  • WebProcess/WebPage/mac/WebPageMac.mm:

(WebKit::WebPage::setShouldPlayToPlaybackTarget):
(WebKit::WebPage::customPlaybackActionSelected): Deleted.

3:14 AM Changeset in webkit [199285] by Carlos Garcia Campos
  • 1 copy in releases/WebKitGTK/webkit-2.4.11

WebKitGTK+ 2.4.11

3:14 AM Changeset in webkit [199284] by Carlos Garcia Campos
  • 4 edits in releases/WebKitGTK/webkit-2.4

Unreviewed. Update NEWS and Versions.m4 for 2.4.11 release.

.:

  • Source/autotools/Versions.m4: Bump version numbers.

Source/WebKit/gtk:

  • NEWS: Added release notes for 2.4.11.
1:53 AM Changeset in webkit [199283] by Carlos Garcia Campos
  • 2 adds in releases/WebKitGTK/webkit-2.4/Source/WebCore/platform/gtk/po

Translation updates: Chinese, Japanese

12:50 AM WebKitGTK/2.4.x edited by Carlos Garcia Campos
(diff)
12:49 AM Changeset in webkit [199282] by Carlos Garcia Campos
  • 3 edits
    2 adds in releases/WebKitGTK/webkit-2.4

Merge r165044 - REGRESSION(r164856): Use after free in WebCore::QualifiedName::operator== / WebCore::StyledElement::attributeChanged
https://bugs.webkit.org/show_bug.cgi?id=129550

Reviewed by Andreas Kling.

Source/WebCore:

We can't store a reference to QualifiedName here because ensureUniqueElementData could delete QualifiedName inside Attribute.

Test: fast/dom/uniquing-attributes-via-setAttribute.html

  • dom/Element.cpp:

(WebCore::Element::setAttributeInternal):

LayoutTests:

Added a regression test.

  • fast/dom/uniquing-attributes-via-setAttribute-expected.txt: Added.
  • fast/dom/uniquing-attributes-via-setAttribute.html: Added.
12:45 AM Changeset in webkit [199281] by Carlos Garcia Campos
  • 2 edits in releases/WebKitGTK/webkit-2.4/Source/WebCore

Merge r166233 - [ARM64] GNU assembler fails in TransformationMatrix::multiply
https://bugs.webkit.org/show_bug.cgi?id=130454

Reviewed by Zoltan Herczeg.

Change the NEON intstructions to the proper style.

  • platform/graphics/transforms/TransformationMatrix.cpp:

(WebCore::TransformationMatrix::multiply):

12:45 AM Changeset in webkit [199280] by Carlos Garcia Campos
  • 2 edits in releases/WebKitGTK/webkit-2.4/Source/WTF

Merge r166234 - [ARM64] GCC generates wrong code with -O2 flag in WTF::weakCompareAndSwap
https://bugs.webkit.org/show_bug.cgi?id=130500

Reviewed by Filip Pizlo.

Set the first operand to the exact register in the inline assembly with GCC.

  • wtf/Atomics.h:

(WTF::weakCompareAndSwap):

Apr 9, 2016:

8:38 PM Changeset in webkit [199279] by keith_miller@apple.com
  • 21 edits in trunk/Source/JavaScriptCore

tryGetById should be supported by the DFG/FTL
https://bugs.webkit.org/show_bug.cgi?id=156378

Reviewed by Filip Pizlo.

This patch adds support for tryGetById in the DFG/FTL. It adds a new DFG node
TryGetById, which acts similarly to the normal GetById DFG node. One key
difference between GetById and TryGetById is that in the LLInt and Baseline
we do not profile the result type. This profiling is unnessary for the current
use case of tryGetById, which is expected to be a strict equality comparision
against a specific object or undefined. In either case other DFG optimizations
will make this equally fast with or without the profiling information.

Additionally, this patch adds new reuse modes for JSValueRegsTemporary that take
an operand and attempt to reuse the registers for that operand if they are free
after the current DFG node.

  • bytecode/GetByIdStatus.cpp:

(JSC::GetByIdStatus::computeFromLLInt):
(JSC::GetByIdStatus::computeForStubInfoWithoutExitSiteFeedback):

  • dfg/DFGAbstractInterpreterInlines.h:

(JSC::DFG::AbstractInterpreter<AbstractStateType>::executeEffects):

  • dfg/DFGByteCodeParser.cpp:

(JSC::DFG::ByteCodeParser::handleGetById):
(JSC::DFG::ByteCodeParser::parseBlock):

  • dfg/DFGCapabilities.cpp:

(JSC::DFG::capabilityLevel):

  • dfg/DFGClobberize.h:

(JSC::DFG::clobberize):

  • dfg/DFGDoesGC.cpp:

(JSC::DFG::doesGC):

  • dfg/DFGFixupPhase.cpp:

(JSC::DFG::FixupPhase::fixupNode):

  • dfg/DFGNode.h:

(JSC::DFG::Node::hasIdentifier):

  • dfg/DFGNodeType.h:
  • dfg/DFGPredictionPropagationPhase.cpp:

(JSC::DFG::PredictionPropagationPhase::propagate):

  • dfg/DFGSafeToExecute.h:

(JSC::DFG::safeToExecute):

  • dfg/DFGSpeculativeJIT.cpp:

(JSC::DFG::SpeculativeJIT::compileTryGetById):
(JSC::DFG::JSValueRegsTemporary::JSValueRegsTemporary):

  • dfg/DFGSpeculativeJIT.h:

(JSC::DFG::GPRTemporary::operator=):

  • dfg/DFGSpeculativeJIT32_64.cpp:

(JSC::DFG::SpeculativeJIT::cachedGetById):
(JSC::DFG::SpeculativeJIT::compile):

  • dfg/DFGSpeculativeJIT64.cpp:

(JSC::DFG::SpeculativeJIT::cachedGetById):
(JSC::DFG::SpeculativeJIT::compile):

  • ftl/FTLCapabilities.cpp:

(JSC::FTL::canCompile):

  • ftl/FTLLowerDFGToB3.cpp:

(JSC::FTL::DFG::LowerDFGToB3::compileNode):
(JSC::FTL::DFG::LowerDFGToB3::compileGetById):
(JSC::FTL::DFG::LowerDFGToB3::getById):

  • jit/JITOperations.cpp:
  • jit/JITOperations.h:
  • tests/stress/try-get-by-id.js:

(tryGetByIdTextStrict):
(get let):
(let.get createBuiltin):
(get throw):
(getCaller.obj.1.throw.new.Error): Deleted.

6:46 PM Changeset in webkit [199278] by commit-queue@webkit.org
  • 2 edits in trunk/Source/WebCore

Fixed compilation of JPEGImageDecoder with libjpeg v9.
https://bugs.webkit.org/show_bug.cgi?id=156445

Patch by Konstantin Tokarev <Konstantin Tokarev> on 2016-04-09
Reviewed by Michael Catanzaro.

ICU defines TRUE and FALSE macros, breaking libjpeg v9 headers.

No new tests needed.

  • platform/image-decoders/jpeg/JPEGImageDecoder.h:
5:26 PM Changeset in webkit [199277] by sbarati@apple.com
  • 2 edits
    1 add in trunk/Source/JavaScriptCore

Allocation sinking SSA Defs are allowed to have replacements
https://bugs.webkit.org/show_bug.cgi?id=156444

Reviewed by Filip Pizlo.

Consider the following program and the annotations that explain why
the SSA defs we create in allocation sinking can have replacements.

function foo(a1) {

let o1 = {x: 20, y: 50};
let o2 = {y: 40, o1: o1};
let o3 = {};


We're Defing a new variable here, call it o3_field.
o3_field is defing the value that is the result of
a GetByOffset that gets eliminated through allocation sinking.
o3.field = o1.y;


dontCSE();


This control flow is here to not allow the phase to consult
its local SSA mapping (which properly handles replacements)
for the value of o3_field.
if (a1) {

a1 = true;

} else {

a1 = false;

}


Here, we ask for the reaching def of o3_field, and assert
it doesn't have a replacement. It does have a replacement
though. The original Def was the GetByOffset. We replaced
that GetByOffset with the value of the o1_y variable.
let value = o3.field;
assert(value === 50);

}

  • dfg/DFGObjectAllocationSinkingPhase.cpp:
  • tests/stress/allocation-sinking-defs-may-have-replacements.js: Added.

(dontCSE):
(assert):
(foo):

1:54 PM Changeset in webkit [199276] by commit-queue@webkit.org
  • 9 edits in trunk/Source

Unreviewed, rolling out r199242.
https://bugs.webkit.org/show_bug.cgi?id=156442

Caused many many leaks (Requested by ap on #webkit).

Reverted changeset:

"Web Inspector: get rid of InspectorBasicValue and
InspectorString subclasses"
https://bugs.webkit.org/show_bug.cgi?id=156407
http://trac.webkit.org/changeset/199242

1:41 PM Changeset in webkit [199275] by fpizlo@apple.com
  • 5 edits in trunk/Source/JavaScriptCore

Debug JSC test failure: stress/multi-put-by-offset-reallocation-butterfly-cse.js.ftl-no-cjit-small-pool
https://bugs.webkit.org/show_bug.cgi?id=156406

Reviewed by Saam Barati.

The failure was because the GC ran from within the butterfly allocation call in a put_by_id
transition AccessCase that had to deal with indexing storage. When the GC runs in a call from a stub,
then we need to be extra careful:

1) The GC may reset the IC and delete the stub. So, the stub needs to tell the GC that it might be on

the stack during GC, so that the GC keeps it alive if it's currently running.


2) If the stub uses (dereferences or stores) some object after the call, then we need to ensure that

the stub routine knows about that object independently of the IC.


In the case of put_by_id transitions that use a helper to allocate the butterfly, we have both
issues. A long time ago, we had to deal with (2), and we still had code to handle that case, although
it appears to be dead. This change revives that code and glues it together with PolymorphicAccess.

  • bytecode/PolymorphicAccess.cpp:

(JSC::AccessCase::alternateBase):
(JSC::AccessCase::doesCalls):
(JSC::AccessCase::couldStillSucceed):
(JSC::AccessCase::generate):
(JSC::PolymorphicAccess::regenerate):

  • bytecode/PolymorphicAccess.h:

(JSC::AccessCase::customSlotBase):
(JSC::AccessCase::isGetter):
(JSC::AccessCase::doesCalls): Deleted.

  • jit/GCAwareJITStubRoutine.cpp:

(JSC::GCAwareJITStubRoutine::markRequiredObjectsInternal):
(JSC::MarkingGCAwareJITStubRoutine::MarkingGCAwareJITStubRoutine):
(JSC::MarkingGCAwareJITStubRoutine::~MarkingGCAwareJITStubRoutine):
(JSC::MarkingGCAwareJITStubRoutine::markRequiredObjectsInternal):
(JSC::GCAwareJITStubRoutineWithExceptionHandler::GCAwareJITStubRoutineWithExceptionHandler):
(JSC::createJITStubRoutine):
(JSC::MarkingGCAwareJITStubRoutineWithOneObject::MarkingGCAwareJITStubRoutineWithOneObject): Deleted.
(JSC::MarkingGCAwareJITStubRoutineWithOneObject::~MarkingGCAwareJITStubRoutineWithOneObject): Deleted.
(JSC::MarkingGCAwareJITStubRoutineWithOneObject::markRequiredObjectsInternal): Deleted.

  • jit/GCAwareJITStubRoutine.h:

(JSC::createJITStubRoutine):

1:13 PM Changeset in webkit [199274] by commit-queue@webkit.org
  • 13 edits in trunk

Unreviewed, rolling out r199268.
https://bugs.webkit.org/show_bug.cgi?id=156440

Broke Windows build (Requested by ap on #webkit).

Reverted changeset:

"Implement functional :host() pseudo class"
https://bugs.webkit.org/show_bug.cgi?id=156397
http://trac.webkit.org/changeset/199268

11:16 AM WebKitGTK/Gardening/Calendar edited by Michael Catanzaro
(diff)
11:16 AM Changeset in webkit [199273] by Michael Catanzaro
  • 2 edits in trunk/LayoutTests

[GTK] Update another GStreamer test expectation

Unreviewed.

  • platform/gtk/TestExpectations:
11:11 AM Changeset in webkit [199272] by Michael Catanzaro
  • 2 edits in trunk/LayoutTests

[GTK] Update some more IndexedDB test expectations.

Unreviewed.

  • platform/gtk/TestExpectations:
10:59 AM WebKitGTK/Gardening/Calendar edited by Michael Catanzaro
(diff)
10:58 AM Changeset in webkit [199271] by Michael Catanzaro
  • 2 edits in trunk/LayoutTests

[GTK] Remove failure expectation from storage/indexeddb/connection-leak.html

It's skipped in the global TestExpectations, see bug #152643.

  • platform/gtk/TestExpectations:
10:45 AM WebKitGTK/Gardening/Calendar edited by Michael Catanzaro
(diff)
10:38 AM WebKitGTK/Gardening/Calendar edited by Michael Catanzaro
(diff)
10:37 AM WebKitGTK/Gardening/Calendar edited by Michael Catanzaro
(diff)
10:29 AM Changeset in webkit [199270] by Michael Catanzaro
  • 2 edits in trunk/LayoutTests

[GTK] Gardening unexpected passes and IndexedDB tests.

Unreviewed gardening.

  • platform/gtk/TestExpectations:
12:40 AM Changeset in webkit [199269] by rniwa@webkit.org
  • 2 edits in trunk/Websites/perf.webkit.org

Build fix. Don't treat a build number 0 as a pending build.

  • tools/js/buildbot-syncer.js:

(BuildbotBuildEntry.prototype.isPending):

12:38 AM Changeset in webkit [199268] by Antti Koivisto
  • 13 edits in trunk

Implement functional :host() pseudo class
https://bugs.webkit.org/show_bug.cgi?id=156397
<rdar://problem/25621445>

Reviewed by Darin Adler.

Source/WebCore:

We already support :host. Add functional syntax too.

  • css/CSSGrammar.y.in:

Parse functional :host().

  • css/CSSParser.cpp:

(WebCore::CSSParser::detectFunctionTypeToken):

  • css/CSSParserValues.cpp:

(WebCore::CSSParserSelector::parsePseudoClassHostFunctionSelector):

  • css/CSSParserValues.h:
  • css/ElementRuleCollector.cpp:

(WebCore::ElementRuleCollector::matchedRuleList):
(WebCore::ElementRuleCollector::addMatchedRule):

Factor some shared code here.

(WebCore::ElementRuleCollector::matchHostPseudoClassRules):

Instead of using the generic paths use a :host specific code path for matching.
This makes it easier to avoid :host matching when it shouldn't.

(WebCore::ElementRuleCollector::collectMatchingRulesForList):

  • css/ElementRuleCollector.h:
  • css/RuleSet.cpp:

(WebCore::computeMatchBasedOnRuleHash):

:host is always handled by the special matching path.

  • css/SelectorChecker.cpp:

(WebCore::SelectorChecker::match):
(WebCore::SelectorChecker::matchHostPseudoClass):

Add a function specifically for checking :host. In always fails on the normal code paths.
Check the argument selector if provided.

(WebCore::hasScrollbarPseudoElement):

  • css/SelectorChecker.h:

LayoutTests:

Enable, fix and expand the test.

  • fast/shadow-dom/css-scoping-shadow-host-functional-rule.html:
  • platform/mac/TestExpectations:

Apr 8, 2016:

10:16 PM Changeset in webkit [199267] by jonlee@apple.com
  • 2 edits in trunk/PerformanceTests

Have Animometer benchmark always start with complexity of 1
https://bugs.webkit.org/show_bug.cgi?id=156432

Reviewed by Ryosuke Niwa.

  • Animometer/tests/resources/main.js: Update the default Controller and RampController to

set its minimum complexities to 1 instead of 0.

9:56 PM Changeset in webkit [199266] by rniwa@webkit.org
  • 7 edits in trunk/Websites/perf.webkit.org

Escape builder names in url* and pathFor* methods of BuildbotSyncer
https://bugs.webkit.org/show_bug.cgi?id=156427

Reviewed by Darin Adler.

The build fix in r199251 breaks other usage of RemoteAPI. Fix it properly by escaping builder names in
various methods of BuildbotSyncer.

Also fixed a typo in the logging and a bug that the new syncing script never updated "scheduled" to "running".

  • server-tests/resources/mock-data.js:

(MockData.mockTestSyncConfigWithTwoBuilders): Renamed "some-builder-2" to "some builder 2" to test the
new escaping behavior in tools-buildbot-triggerable-tests.js and buildbot-syncer-tests.js.

  • server-tests/tools-buildbot-triggerable-tests.js: Added tests for status url, and added a new test case

for updating "scheduled" to "running".

  • tools/js/buildbot-syncer.js:

(BuildbotBuildEntry.buildRequestStatusIfUpdateIsNeeded): Update the status to "running" when the request's
status is "scheduled" and the buildbot's build is currently in progress.
(BuildbotSyncer.prototype.pathForPendingBuildsJSON): Escape the builder name.
(BuildbotSyncer.prototype.pathForBuildJSON): Ditto.
(BuildbotSyncer.prototype.pathForForceBuild): Ditto.
(BuildbotSyncer.prototype.url): Ditto.
(BuildbotSyncer.prototype.urlForBuildNumber): Ditto.

  • tools/js/buildbot-triggerable.js:

(BuildbotTriggerable.prototype._pullBuildbotOnAllSyncers):
(BuildbotTriggerable.prototype._scheduleNextRequestInGroupIfSlaveIsAvailable): Fixed a typo. We are
scheduling new build requests, not syncing them.

  • tools/js/remote.js:

(RemoteAPI.sendHttpRequest): Reverted r199251.

  • unit-tests/buildbot-syncer-tests.js:
8:46 PM Changeset in webkit [199265] by Darin Adler
  • 28 edits in trunk

Improve IDL support for object arguments that are neither optional nor nullable
https://bugs.webkit.org/show_bug.cgi?id=156149

Reviewed by Chris Dumez.

Source/WebCore:

After this patch, we are almost ready to change some more DOM functions to
use references instead of pointers. Remaining blocking issue is lack of support
for ShouldPassWrapperByReference in the gobject bindings.

  • bindings/objc/ExceptionHandlers.h: Add NO_RETURN to raiseDOMException.

Added a new raiseTypeErrorException. Re-indented header and removed unneeded
include and forward declarations.

  • bindings/objc/ExceptionHandlers.mm:

(WebCore::raiseDOMException): Added RELEASE_ASSERT_NOT_REACHED so the compiler
will understand this is NO_RETURN. Also updated FIXME comment.
(WebCore::raiseTypeErrorException): Added.

  • bindings/scripts/CodeGenerator.pm: Removed unneeded code that allows the type

"AtomicString" in IDL files.
(ShouldPassWrapperByReference): Added. Contains the logic from the function in
the JavaScript code generator that was named IsPointerParameterPassedByReference,
minus a couple checks that are unneeded. For use in other code generators so they
are all consistent about how they call the DOM implementation.

  • bindings/scripts/CodeGeneratorGObject.pm:

(SkipFunction): Removed support for unused CustomBinding extended attribute.

  • bindings/scripts/CodeGeneratorJS.pm:

(GenerateHeader): Removed support for unused CustomBinding extended attribute.
(GenerateImplementation): Ditto. Also changed type checking code to throw a
type error in a more efficient way, using throwVMTypeError directly.
(GenerateParametersCheck): Rearranged code a bit so that arguments that need to
be passed in unusual ways are handled all in one place. Use WTFMove for newly
created NodeFilter objects. Simplified the reference logic so it doesn't need
to do an additional check to see if a type is a callback. Also changed type
checking code to throw a type error in a more efficient way, using throwVMTypeError
directly. Also corrected mistake where null checking code was throwing
TYPE_MISMATCH_ERR instead of a type error.
(GetNativeType): Coding style tweak.
(ShouldPassWrapperByReference): Renamed from IsPointerParameterPassedByReference.
Changed to call underlying ShouldPassWrapperByReference function in the language-
independent code generator.
(GenerateConstructorDefinition): Updated for name change.

  • bindings/scripts/CodeGeneratorObjC.pm:

(SkipFunction): Removed support for unused CustomBinding extended attribute.
(GenerateImplementation): Added code to null check and pass a reference when
ShouldPassWrapperByReference returns true.

  • bindings/scripts/IDLAttributes.txt: Sorted in the AppleCopyright and

UsePointersEvenForNonNullableObjectArguments arguments. Removed the unused
CPPPureInterface and CustomBinding attributes.

  • bindings/scripts/test/JS/JSTestActiveDOMObject.cpp: Regenerated test results.
  • bindings/scripts/test/JS/JSTestInterface.cpp: Ditto.
  • bindings/scripts/test/JS/JSTestMediaQueryListListener.cpp: Ditto.
  • bindings/scripts/test/JS/JSTestObj.cpp: Ditto.
  • bindings/scripts/test/JS/JSTestObj.h: Ditto.
  • bindings/scripts/test/JS/JSTestOverloadedConstructors.cpp: Ditto.
  • bindings/scripts/test/JS/JSTestTypedefs.cpp: Ditto.
  • bindings/scripts/test/ObjC/DOMTestActiveDOMObject.mm: Ditto.
  • bindings/scripts/test/ObjC/DOMTestCallback.mm: Ditto.
  • bindings/scripts/test/ObjC/DOMTestCallbackFunction.mm: Ditto.
  • bindings/scripts/test/ObjC/DOMTestInterface.mm: Ditto.
  • bindings/scripts/test/ObjC/DOMTestMediaQueryListListener.mm: Ditto.
  • bindings/scripts/test/ObjC/DOMTestObj.mm: Ditto.
  • bindings/scripts/test/TestObj.idl: Removed test for CustomBinding.
  • dom/DOMImplementation.idl: Fixed #if so that only the return type is different

between JavaScript and the other bindings. Without this change, the different
bindings got different results for ShouldPassWrapperByReference. Also formatted
functions all on a single line.

  • dom/EventListener.idl: Removed CPPPureInterface, since it had no effect.
  • dom/EventTarget.idl: Ditto.

LayoutTests:

  • fast/canvas/canvas-path-addPath-expected.txt: Updated expected result to expect

TypeError rather than TYPE_MISMATCH_ERR. A progression.

  • fast/text/font-face-set-javascript-expected.txt: Ditto.
8:07 PM Changeset in webkit [199264] by Chris Dumez
  • 32 edits in trunk/Source/WebCore

[WebIDL] Add support for [ExportMacro=XXX] IDL extended attribute
https://bugs.webkit.org/show_bug.cgi?id=156428

Reviewed by Ryosuke Niwa.

Add support for [ExportMacro=XXX] IDL extended attribute (e.g. [ExportMacro=WEBCORE_EXPORT])
so developers can indicate in the IDL which macro to use to export the generated JS bindings
class.

We previously supported this by hard-coding JS class names in the bindings generator which
was ugly.

  • Modules/mediasession/MediaSession.idl:
  • Modules/mediasource/SourceBuffer.idl:
  • Modules/notifications/Notification.idl:
  • Modules/webaudio/AudioContext.idl:
  • bindings/scripts/CodeGeneratorJS.pm:

(GetExportMacroForJSClass):
(GenerateHeader):
(AddIncludesForType): Deleted.
(AddToImplIncludes): Deleted.

  • bindings/scripts/IDLAttributes.txt:
  • bindings/scripts/test/TestInterface.idl:
  • bindings/scripts/test/TestNode.idl:
  • css/CSSStyleDeclaration.idl:
  • dom/ClientRect.idl:
  • dom/ClientRectList.idl:
  • dom/Document.idl:
  • dom/Element.idl:
  • dom/Node.idl:
  • dom/Range.idl:
  • fileapi/File.idl:
  • html/DOMURL.idl:
  • html/HTMLElement.idl:
  • html/HTMLMediaElement.idl:
  • html/TimeRanges.idl:
  • html/canvas/DOMPath.idl:
  • inspector/ScriptProfile.idl:
  • inspector/ScriptProfileNode.idl:
  • page/DOMWindow.idl:
  • page/make_settings.pl:

(generateInternalSettingsIdlFile):

  • testing/InternalSettings.idl:
  • testing/Internals.idl:
  • testing/MallocStatistics.idl:
  • testing/MemoryInfo.idl:
  • testing/TypeConversions.idl:
  • xml/XMLHttpRequest.idl:
7:37 PM Changeset in webkit [199263] by commit-queue@webkit.org
  • 12 edits
    6 adds in trunk

Web Inspector: XHRs and Web Worker scripts are not searchable
https://bugs.webkit.org/show_bug.cgi?id=154214
<rdar://problem/24643587>

Patch by Joseph Pecoraro <Joseph Pecoraro> on 2016-04-08
Reviewed by Timothy Hatcher.

Source/JavaScriptCore:

  • inspector/protocol/Page.json:

Add optional requestId to search results properties and search
parameters for when the frameId and url are not enough. XHR
resources, and "Other" resources will use this.

Source/WebCore:

Test: inspector/page/searchInResources.html

  • inspector/InspectorPageAgent.h:
  • inspector/InspectorPageAgent.cpp:

(WebCore::InspectorPageAgent::searchInResource):
(WebCore::InspectorPageAgent::searchInResources):
Let the NetworkAgent handle individual search requests
with a requestId. And provide global search results for
"other" resources and will include requestId properties.

  • inspector/InspectorNetworkAgent.h:
  • inspector/InspectorNetworkAgent.cpp:

(WebCore::InspectorNetworkAgent::didFinishXHRLoading):
(WebCore::buildObjectForSearchResult):
(WebCore::InspectorNetworkAgent::searchOtherRequests):
(WebCore::InspectorNetworkAgent::searchInRequest):
Search saved "other" resource data content.

  • inspector/NetworkResourcesData.h:
  • inspector/NetworkResourcesData.cpp:

(WebCore::NetworkResourcesData::resources):
Expose the resources for iteration by the NetworkAgent.

Source/WebInspectorUI:

  • UserInterface/Views/SearchSidebarPanel.js:

(WebInspector.SearchSidebarPanel.prototype.performSearch.resourceCallback):
(WebInspector.SearchSidebarPanel.prototype.performSearch.resourcesCallback):
Carry forward the requestId property if it is available.

LayoutTests:

  • inspector/page/resources/search-script.js: Added.
  • inspector/page/resources/search-stylesheet.css: Added.
  • inspector/page/resources/search-worker.js: Added.
  • inspector/page/resources/search-xhr.txt: Added.
  • inspector/page/searchInResources-expected.txt: Added.
  • inspector/page/searchInResources.html: Added.

Test for the Page domain's search commands.

7:32 PM Changeset in webkit [199262] by commit-queue@webkit.org
  • 5 edits in trunk/Source/WebInspectorUI

Web Inspector: Allocation snapshot hover persists after switching tabs
https://bugs.webkit.org/show_bug.cgi?id=156430
<rdar://problem/25633800>

Patch by Joseph Pecoraro <Joseph Pecoraro> on 2016-04-08
Reviewed by Timothy Hatcher.

  • UserInterface/Views/HeapSnapshotInstanceDataGridNode.js:

(WebInspector.HeapSnapshotInstanceDataGridNode.prototype._mouseoverHandler):
Don't show the popover if the tree is no longer visible.

  • UserInterface/Views/HeapSnapshotInstancesContentView.js:

(WebInspector.HeapSnapshotInstancesContentView.prototype.shown):

  • UserInterface/Views/HeapSnapshotInstancesDataGridTree.js:

(WebInspector.HeapSnapshotInstancesDataGridTree):
(WebInspector.HeapSnapshotInstancesDataGridTree.prototype.get visible):
(WebInspector.HeapSnapshotInstancesDataGridTree.prototype.shown):
(WebInspector.HeapSnapshotInstancesDataGridTree.prototype.hidden):
Give the tree a visible state and have its containing ContentView
update it with normal ContentView shown/hidden.

  • UserInterface/Views/Popover.js:

We are presenting while we were dismissing, so completely clear the
dismissing state.

6:20 PM Changeset in webkit [199261] by commit-queue@webkit.org
  • 2 edits in trunk/Source/JavaScriptCore

MIPS: support Signed cond in branchTest32()
https://bugs.webkit.org/show_bug.cgi?id=156260

This is needed since r197688 makes use of it.

Patch by Guillaume Emont <guijemont@igalia.com> on 2016-04-08
Reviewed by Mark Lam.

  • assembler/MacroAssemblerMIPS.h:

(JSC::MacroAssemblerMIPS::branchTest32):

6:19 PM Changeset in webkit [199260] by jdiggs@igalia.com
  • 15 edits in trunk

AX: "AXLandmarkApplication" is an inappropriate subrole for ARIA "application" since it's no longer a landmark
https://bugs.webkit.org/show_bug.cgi?id=155403

Reviewed by Chris Fleizach.

The new subrole is AXWebApplication and the new role description is "web application".
As part of the fix, the WebCore AccessibilityRole for ARIA's "application" role was
renamed from LandmarkApplicationRole to WebApplicationRole.

The roles-exposed.html and aria-grouping-roles.html test expectations were also updated.

Source/WebCore:

  • English.lproj/Localizable.strings:
  • accessibility/AccessibilityObject.cpp:

(WebCore::AccessibilityObject::accessibleNameDerivesFromContent):
(WebCore::AccessibilityObject::isLandmark):
(WebCore::initializeRoleMap):

  • accessibility/AccessibilityObject.h:
  • accessibility/atk/WebKitAccessibleWrapperAtk.cpp:

(atkRole):

  • accessibility/ios/WebAccessibilityObjectWrapperIOS.mm:

(-[WebAccessibilityObjectWrapper determineIsAccessibilityElement]):
(-[WebAccessibilityObjectWrapper _accessibilityIsLandmarkRole:]):

  • accessibility/mac/WebAccessibilityObjectWrapperBase.mm:

(-[WebAccessibilityObjectWrapperBase ariaLandmarkRoleDescription]):

  • accessibility/mac/WebAccessibilityObjectWrapperMac.mm:

(createAccessibilityRoleMap):
(-[WebAccessibilityObjectWrapper subrole]):

  • platform/LocalizedStrings.cpp:

(WebCore::AXARIAContentGroupText):

Source/WebKit/win:

  • AccessibleBase.cpp: Update the rolename

(MSAARole):

LayoutTests:

  • accessibility/mac/aria-grouping-roles-expected.txt:
  • accessibility/mac/aria-grouping-roles.html:
  • platform/mac/accessibility/roles-exposed-expected.txt:
6:18 PM Changeset in webkit [199259] by Simon Fraser
  • 16 edits in trunk/Source

[iOS WK2] WKWebViews should consult ancestor UIScrollViews to determine tiling area
https://bugs.webkit.org/show_bug.cgi?id=156429
rdar://problem/25455111

Reviewed by Tim Horton.

When a WKWebView is expanded to full size, then embedded in UIScrollView, it would
create huge tiles that cover the entire view area (since it considered itself non-scrollable).

Fix to always use 512x512 tiles in this configuration, and to adjust the tile coverage
for the area exposed through the enclosing UIScrollView.

Source/WebCore:

  • loader/HistoryController.cpp:

(WebCore::HistoryController::saveScrollPositionAndViewStateToItem): setObscuredInset()
moved from FrameView to Page.

  • page/FrameView.cpp:

(WebCore::FrameView::adjustTiledBackingScrollability): If we're clipped by an ancestor scrollView,
just assume we're scrollable on both axes.

  • page/Page.h:

(WebCore::Page::obscuredInset):
(WebCore::Page::setObscuredInset):
(WebCore::Page::enclosedInScrollView):
(WebCore::Page::setEnclosedInScrollView):

  • platform/ScrollView.h:

(WebCore::ScrollView::platformObscuredInset): Deleted.
(WebCore::ScrollView::platformSetObscuredInset): Deleted.

Source/WebKit2:

  • Shared/VisibleContentRectUpdateInfo.cpp: Add enclosedInScrollView(), which is used to

trigger normal-sized tiles.
(WebKit::VisibleContentRectUpdateInfo::encode):
(WebKit::VisibleContentRectUpdateInfo::decode):

  • Shared/VisibleContentRectUpdateInfo.h:

(WebKit::VisibleContentRectUpdateInfo::VisibleContentRectUpdateInfo):
(WebKit::VisibleContentRectUpdateInfo::enclosedInScrollView):
(WebKit::operator==):

  • UIProcess/API/Cocoa/WKWebView.mm:

(-[WKWebView _didInvokeUIScrollViewDelegateCallback]): Pass our scrollView.
(-[WKWebView _didFinishScrolling]):
(-[WKWebView scrollViewDidScroll:]):
(-[WKWebView scrollViewDidZoom:]):
(-[WKWebView scrollViewDidEndZooming:withView:atScale:]):
(-[WKWebView _scrollViewDidInterruptDecelerating:]):
(-[WKWebView _visibleRectInEnclosingScrollView:]):
(-[WKWebView _visibleContentRect]): Compute the exposed part of the content relative
to the WKWebView, then intersect with the exposed part via any ancestor UIScrollView.
(-[WKWebView _didScroll]): This is called by UIKit when some ancestor UIScrollView scrolls.
However, we don't get all the UIScrollView delegate callbacks, so have to use a timer to
trigger a call to -_updateVisibleContentRects when we're in a stable state.
(-[WKWebView _enclosingScrollerScrollingEnded:]):
(-[WKWebView _frameOrBoundsChanged]):
(-[WKWebView _updateVisibleContentRects]):
(-[WKWebView _updateVisibleContentRectAfterScrollInView:]): Get the stable state from the
scroll view that the user is interacting with.
(-[WKWebView _updateContentRectsWithState:]):

  • UIProcess/API/Cocoa/WKWebViewInternal.h:
  • UIProcess/WebPageProxy.h: Rather than pass a bazillion arguments through updateVisibleContentRects(), just

pass the VisibleContentRectUpdateInfo struct.

  • UIProcess/ios/WKContentView.h:
  • UIProcess/ios/WKContentView.mm:

(-[WKContentView didUpdateVisibleRect:unobscuredRect:unobscuredRectInScrollViewCoordinates:obscuredInset:scale:minimumScale:inStableState:isChangingObscuredInsetsInteractively:enclosedInScrollView:]):
(-[WKContentView didUpdateVisibleRect:unobscuredRect:unobscuredRectInScrollViewCoordinates:obscuredInset:scale:minimumScale:inStableState:isChangingObscuredInsetsInteractively:]): Deleted.

  • UIProcess/ios/WebPageProxyIOS.mm:

(WebKit::WebPageProxy::updateVisibleContentRects):

  • UIProcess/mac/RemoteLayerTreeDrawingAreaProxy.mm:

(WebKit::RemoteLayerTreeDrawingAreaProxy::RemoteLayerTreeDrawingAreaProxy):
(WebKit::RemoteLayerTreeDrawingAreaProxy::indicatorLocation):

  • WebProcess/WebPage/WebPage.cpp:

(WebKit::WebPage::updatePreferences):

  • WebProcess/WebPage/ios/WebPageIOS.mm:

(WebKit::WebPage::updateVisibleContentRects):

5:42 PM Changeset in webkit [199258] by commit-queue@webkit.org
  • 4 edits in trunk/Source

[iOS Simulator] Build failure (property 'contentsFormat' not found on object of type 'LegacyTileLayer *')
https://bugs.webkit.org/show_bug.cgi?id=156415

Patch by Joseph Pecoraro <Joseph Pecoraro> on 2016-04-08
Reviewed by Simon Fraser.

Source/WebCore:

  • platform/spi/cocoa/QuartzCoreSPI.h:

Provide SPI forward declaration of the CALayer contentsFormat property.

Source/WebKit2:

  • UIProcess/API/Cocoa/_WKElementAction.mm:

(-[_WKElementAction runActionWithElementInfo:]):
Use WeakObjCPtr instead of weak to avoid build errors when not under ARC.

5:36 PM Changeset in webkit [199257] by achristensen@apple.com
  • 19 edits in trunk

Progress towards running CMake WebKit2 on Mac
https://bugs.webkit.org/show_bug.cgi?id=156426

Reviewed by Tim Horton.

.:

  • Source/cmake/OptionsMac.cmake:

FTL works on Mac, so let's use it.

  • Source/cmake/WebKitMacros.cmake:

Source/JavaScriptCore:

  • PlatformMac.cmake:

Source/WebCore:

  • CMakeLists.txt:
  • PlatformGTK.cmake:
  • PlatformMac.cmake:
  • PlatformWin.cmake:

On Mac, WTF is a static library that is linked only with JavaScriptCore.

Source/WebKit:

  • CMakeLists.txt:
  • PlatformMac.cmake:
  • PlatformWin.cmake:

Source/WebKit2:

  • CMakeLists.txt:
  • PlatformMac.cmake:

Put the xpc service binaries in the right place.

Source/WTF:

  • wtf/PlatformMac.cmake:
5:33 PM Changeset in webkit [199256] by achristensen@apple.com
  • 3 edits in trunk/Source/WebKit2

Build fix with IndexedDB disabled but DatabaseProcess enabled after r199230
https://bugs.webkit.org/show_bug.cgi?id=156321

Rubber-stamped by Brady Eidson.

  • DatabaseProcess/DatabaseProcess.cpp:

(WebKit::DatabaseProcess::deleteWebsiteDataForOrigins):
(WebKit::DatabaseProcess::grantSandboxExtensionsForBlobs):
(WebKit::DatabaseProcess::accessToTemporaryFileComplete):
(WebKit::DatabaseProcess::indexedDatabaseOrigins):

  • DatabaseProcess/DatabaseProcess.h:

Add some more guards.

4:01 PM Changeset in webkit [199255] by bshafiei@apple.com
  • 2 edits in branches/safari-601.1.46-branch/Source/WebCore

Merged r199253. rdar://problem/25533763

3:59 PM Changeset in webkit [199254] by bshafiei@apple.com
  • 2 edits in branches/safari-601.1.46-branch/Source/WebCore

Merged r199252. rdar://problem/25533763

3:54 PM Changeset in webkit [199253] by jer.noble@apple.com
  • 2 edits in trunk/Source/WebCore

Unreviewed 32-bit build fix; make type of std::min<> explicit.

  • platform/audio/ios/AudioDestinationIOS.cpp:

(WebCore::AudioDestinationIOS::render):

3:41 PM Changeset in webkit [199252] by jer.noble@apple.com
  • 2 edits in trunk/Source/WebCore

CRASH in AudioDestinationNode::render()
https://bugs.webkit.org/show_bug.cgi?id=156308

Reviewed by Eric Carlson.

Yet another math error in AudioDestinationIOS::render(). It is possible for the difference between
m_startSpareFrame and m_endSpareFrame to be greater than the numberOfFrames to be rendered. Protect
against this case by taking the min() of those two values and only advancing m_startSpareFrame by
that amount. This guarantees that framesThisTime will never underflow, and that data will not be
written past the end of the ioData parameter.

  • platform/audio/ios/AudioDestinationIOS.cpp:

(WebCore::AudioDestinationIOS::render):

3:37 PM Changeset in webkit [199251] by rniwa@webkit.org
  • 2 edits in trunk/Websites/perf.webkit.org

Build fix. We need to escape the path or http.request would fail.

  • tools/js/remote.js:
3:01 PM Changeset in webkit [199250] by beidson@apple.com
  • 12 edits in trunk/Source/WebCore

Modern IDB: Use more IDBValue and IDBGetResult in IDBBackingStore.
https://bugs.webkit.org/show_bug.cgi?id=156418

Reviewed by Alex Christensen.

No new tests (Refactor, no change in behavior).

  • Modules/indexeddb/IDBValue.cpp:

(WebCore::IDBValue::IDBValue):

  • Modules/indexeddb/IDBValue.h:
  • Modules/indexeddb/server/IDBBackingStore.h:
  • Modules/indexeddb/server/MemoryBackingStoreTransaction.cpp:

(WebCore::IDBServer::MemoryBackingStoreTransaction::abort):

  • Modules/indexeddb/server/MemoryIDBBackingStore.cpp:

(WebCore::IDBServer::MemoryIDBBackingStore::addRecord):
(WebCore::IDBServer::MemoryIDBBackingStore::getRecord):

  • Modules/indexeddb/server/MemoryIDBBackingStore.h:
  • Modules/indexeddb/server/MemoryObjectStore.cpp:

(WebCore::IDBServer::MemoryObjectStore::addRecord):

  • Modules/indexeddb/server/MemoryObjectStore.h:
  • Modules/indexeddb/server/SQLiteIDBBackingStore.cpp:

(WebCore::IDBServer::SQLiteIDBBackingStore::addRecord):
(WebCore::IDBServer::SQLiteIDBBackingStore::getRecord):

  • Modules/indexeddb/server/SQLiteIDBBackingStore.h:
  • Modules/indexeddb/server/UniqueIDBDatabase.cpp:

(WebCore::IDBServer::UniqueIDBDatabase::performPutOrAdd):
(WebCore::IDBServer::UniqueIDBDatabase::performGetRecord):

2:21 PM Changeset in webkit [199249] by sbarati@apple.com
  • 2 edits in trunk/Source/JavaScriptCore

Debugger may dereference m_currentCallFrame even after the VM has gone idle
https://bugs.webkit.org/show_bug.cgi?id=156413

Reviewed by Mark Lam.

There is a bug where the debugger may dereference its m_currentCallFrame
pointer after that pointer becomes invalid to read from. This happens like so:

We may step over an instruction which causes the end of execution for the
current program. This causes the VM to exit. Then, we perform a GC which
causes us to collect the global object. The global object being collected
causes us to detach the debugger. In detaching, we think we still have a
valid m_currentCallFrame, we dereference it, and crash. The solution is to
make sure we're paused when dereferencing this pointer inside ::detach().

  • debugger/Debugger.cpp:

(JSC::Debugger::detach):

2:11 PM Changeset in webkit [199248] by beidson@apple.com
  • 8 edits in trunk/Source/WebCore

Modern IDB: Make IDBGetResult contain an IDBValue instead of a buffer, and remove unused methods.
https://bugs.webkit.org/show_bug.cgi?id=156416

Reviewed by Alex Christensen.

No new tests (Refactor, no change in behavior).

  • Modules/indexeddb/IDBCursor.cpp:

(WebCore::IDBCursor::setGetResult):

  • Modules/indexeddb/IDBGetResult.cpp:

(WebCore::IDBGetResult::dataFromBuffer):
(WebCore::IDBGetResult::isolatedCopy):

  • Modules/indexeddb/IDBGetResult.h:

(WebCore::IDBGetResult::IDBGetResult):
(WebCore::IDBGetResult::value):
(WebCore::IDBGetResult::encode):
(WebCore::IDBGetResult::decode):
(WebCore::IDBGetResult::valueBuffer): Deleted.
(WebCore::IDBGetResult::setValueBuffer): Deleted.
(WebCore::IDBGetResult::setKeyData): Deleted.
(WebCore::IDBGetResult::setPrimaryKeyData): Deleted.
(WebCore::IDBGetResult::setKeyPath): Deleted.

  • Modules/indexeddb/IDBTransaction.cpp:

(WebCore::IDBTransaction::didGetRecordOnServer):

  • Modules/indexeddb/IDBValue.cpp:

(WebCore::IDBValue::IDBValue):

  • Modules/indexeddb/IDBValue.h:
  • Modules/indexeddb/server/SQLiteIDBBackingStore.cpp:

(WebCore::IDBServer::SQLiteIDBBackingStore::getIndexRecord):

2:01 PM Changeset in webkit [199247] by Alan Bujtas
  • 10 edits
    6 adds in trunk

Focus ring drawn at incorrect location on image map with CSS transform.
https://bugs.webkit.org/show_bug.cgi?id=143527
<rdar://problem/21908735>

Reviewed by Simon Fraser.

Source/WebCore:

Implement pathForFocusRing for HTMLAreaElement. It follows the logic of RenderObject::addFocusRingRects().

Tests: fast/images/image-map-outline-in-positioned-container.html

fast/images/image-map-outline-with-paint-root-offset.html
fast/images/image-map-outline-with-scale-transform.html
fast/images/image-map-outline.html

  • html/HTMLAreaElement.cpp:

(WebCore::HTMLAreaElement::pathForFocusRing):

  • html/HTMLAreaElement.h:
  • rendering/RenderElement.cpp:

(WebCore::RenderElement::paintFocusRing): Move addFocusRingRects() out of focus ring painting.
(WebCore::RenderElement::paintOutline):

  • rendering/RenderElement.h:
  • rendering/RenderImage.cpp:

(WebCore::RenderImage::paint):
(WebCore::RenderImage::paintAreaElementFocusRing):

  • rendering/RenderImage.h:
  • rendering/RenderInline.cpp:

(WebCore::RenderInline::paintOutline):

LayoutTests:

Implement pathForFocusRing for HTMLAreaElement.

  • fast/images/image-map-outline-in-positioned-container-expected.html: Added.
  • fast/images/image-map-outline-in-positioned-container.html: Added.
  • fast/images/image-map-outline-with-paint-root-offset-expected.html: Added.
  • fast/images/image-map-outline-with-paint-root-offset.html: Added.
  • fast/images/image-map-outline-with-scale-transform-expected.html: Added.
  • fast/images/image-map-outline-with-scale-transform.html: Added.
1:59 PM Changeset in webkit [199246] by ggaren@apple.com
  • 3 edits in trunk/Source/bmalloc

bmalloc: stress_aligned test fails if you increase smallMax
https://bugs.webkit.org/show_bug.cgi?id=156414

Reviewed by Oliver Hunt.

When size exceeds alignment and is a multiple of alignment and is not
a power of two, such as 24kB with 8kB alignment, the small allocator
did not always guarantee alignment. Let's fix that.

  • bmalloc/Algorithm.h:

(bmalloc::divideRoundingUp): Math is hard.

  • bmalloc/Allocator.cpp:

(bmalloc::Allocator::allocate): Align to the page size unconditionally.
Even if the page size is not a power of two, it might be a multiple of
a power of two, and we want alignment to that smaller power of two to
be guaranteed.

1:46 PM Changeset in webkit [199245] by Brent Fulgham
  • 2 edits in trunk/Source/WebCore

[WK1] Wheel event callback removing the window causes crash in WebCore
https://bugs.webkit.org/show_bug.cgi?id=156409
<rdar://problem/25631267>

Reviewed by Simon Fraser.

Null check the Widget before using it, since the iframe may have been removed
from its parent document inside the event handler.

This is the WK1 fix for https://bugs.webkit.org/show_bug.cgi?id=150871.

Tested by fast/events/wheel-event-destroys-frame.html

  • page/EventHandler.cpp:

(WebCore::widgetForElement): Added.
(WebCore::EventHandler::handleWheelEvent): Use new helper function to
clean up the code, and allow us to check that the Widget has not been
destroyed during the event handler.

1:19 PM Changeset in webkit [199244] by jonlee@apple.com
  • 5 edits in trunk/PerformanceTests

Fix SVG benchmark test
https://bugs.webkit.org/show_bug.cgi?id=156410

Reviewed by Dean Jackson.

  • Animometer/resources/extensions.js: Update Point.zero to be a static Point.
  • Animometer/tests/simple/resources/tiled-canvas-image.js:

(Stage.call._setupTiles): Refactor.

  • Animometer/tests/master/resources/particles.js:

(Particle.prototype.reset): Use Point.center.
(complexity): We are not using a gradient background anymore, so remove the +1.

  • Animometer/tests/master/resources/svg-particles.js: Update to use SVG transform

instead of CSS transform.

1:07 PM Changeset in webkit [199243] by Said Abou-Hallawa
  • 2 edits in trunk/Source/WebCore

Timing attack on SVG feComposite filter circumvents same-origin policy
https://bugs.webkit.org/show_bug.cgi?id=154338

Patch by Said Abou-Hallawa <sabouhallawa@apple,com> on 2016-04-08
Reviewed by Oliver Hunt.

Ensure the FEComposite arithmetic filter is clamping the resulted color
components in a constant time.

  • platform/graphics/filters/FEComposite.cpp:

(WebCore::clampByte):
(WebCore::computeArithmeticPixels):

12:59 PM Changeset in webkit [199242] by Brian Burg
  • 9 edits in trunk/Source

Web Inspector: get rid of InspectorBasicValue and InspectorString subclasses
https://bugs.webkit.org/show_bug.cgi?id=156407
<rdar://problem/25627659>

Reviewed by Timothy Hatcher.

Source/JavaScriptCore:

There's no point having these subclasses as they don't save any space.
Add m_stringValue to the union and merge some implementations of writeJSON.
Move uses of the subclass to InspectorValue and delete redundant methods.
Now, most InspectorValue methods are non-virtual so they can be templated.

  • bindings/ScriptValue.cpp:

(Deprecated::jsToInspectorValue):

  • inspector/InjectedScriptBase.cpp:

(Inspector::InjectedScriptBase::makeCall):
Don't used deleted subclasses.

  • inspector/InspectorValues.cpp:

(Inspector::InspectorValue::null):
(Inspector::InspectorValue::create):
(Inspector::InspectorValue::asValue):
(Inspector::InspectorValue::asBoolean):
(Inspector::InspectorValue::asDouble):
(Inspector::InspectorValue::asInteger):
(Inspector::InspectorValue::asString):
These only need one implementation now.

(Inspector::InspectorValue::writeJSON):
Still a virtual method since Object and Array need their members.

(Inspector::InspectorObjectBase::InspectorObjectBase):
(Inspector::InspectorBasicValue::asBoolean): Deleted.
(Inspector::InspectorBasicValue::asDouble): Deleted.
(Inspector::InspectorBasicValue::asInteger): Deleted.
(Inspector::InspectorBasicValue::writeJSON): Deleted.
(Inspector::InspectorString::asString): Deleted.
(Inspector::InspectorString::writeJSON): Deleted.
(Inspector::InspectorString::create): Deleted.
(Inspector::InspectorBasicValue::create): Deleted.

  • inspector/InspectorValues.h:

(Inspector::InspectorObjectBase::setBoolean):
(Inspector::InspectorObjectBase::setInteger):
(Inspector::InspectorObjectBase::setDouble):
(Inspector::InspectorObjectBase::setString):
(Inspector::InspectorArrayBase::pushBoolean):
(Inspector::InspectorArrayBase::pushInteger):
(Inspector::InspectorArrayBase::pushDouble):
(Inspector::InspectorArrayBase::pushString):
Use new factory methods.

  • replay/EncodedValue.cpp:

(JSC::ScalarEncodingTraits<bool>::encodeValue):
(JSC::ScalarEncodingTraits<double>::encodeValue):
(JSC::ScalarEncodingTraits<float>::encodeValue):
(JSC::ScalarEncodingTraits<int32_t>::encodeValue):
(JSC::ScalarEncodingTraits<int64_t>::encodeValue):
(JSC::ScalarEncodingTraits<uint32_t>::encodeValue):
(JSC::ScalarEncodingTraits<uint64_t>::encodeValue):

  • replay/EncodedValue.h:

Use new factory methods.

Source/WebCore:

  • inspector/InspectorDatabaseAgent.cpp: Don't use deleted subclasses.
12:40 PM Changeset in webkit [199241] by commit-queue@webkit.org
  • 3 edits in trunk/Source/WebInspectorUI

JSContext Inspector: Fix asserts and uncaught exception showing Timeline Tab
https://bugs.webkit.org/show_bug.cgi?id=156411

Patch by Joseph Pecoraro <Joseph Pecoraro> on 2016-04-08
Reviewed by Timothy Hatcher.

  • UserInterface/Views/OverviewTimelineView.js:

(WebInspector.OverviewTimelineView):
(WebInspector.OverviewTimelineView.prototype.closed):
Gracefully handle if we do not have a Network Timeline.

  • UserInterface/Views/TimelineTabContentView.js:

(WebInspector.TimelineTabContentView.prototype._changeViewMode):
This function is always called by the constructor, so the assert
is not useful since it can be called when FPS is not supported.

12:37 PM Changeset in webkit [199240] by fpizlo@apple.com
  • 8 edits
    19 adds in trunk

Add IC support for arguments.length
https://bugs.webkit.org/show_bug.cgi?id=156389

Reviewed by Geoffrey Garen.
Source/JavaScriptCore:


This adds support for caching accesses to arguments.length for both DirectArguments and
ScopedArguments. In strict mode, we already cached these accesses since they were just
normal properties.

Amazingly, we also already supported caching of overridden arguments.length in both
DirectArguments and ScopedArguments. This is because when you override, the property gets
materialized as a normal JS property and the structure is changed.

This patch painstakingly preserves our previous caching of overridden length while
introducing caching of non-overridden length (i.e. the common case). In fact, we even cache
the case where it could either be overridden or not, since we just end up with an AccessCase
for each and they cascade to each other.

This is a >3x speed-up on microbenchmarks that do arguments.length in a polymorphic context.
Entirely monomorphic accesses were already handled by the DFG.

  • bytecode/PolymorphicAccess.cpp:

(JSC::AccessGenerationState::calculateLiveRegistersForCallAndExceptionHandling):
(JSC::AccessCase::guardedByStructureCheck):
(JSC::AccessCase::generateWithGuard):
(JSC::AccessCase::generate):
(WTF::printInternal):

  • bytecode/PolymorphicAccess.h:
  • jit/ICStats.h:
  • jit/JITOperations.cpp:
  • jit/Repatch.cpp:

(JSC::tryCacheGetByID):
(JSC::tryCachePutByID):
(JSC::tryRepatchIn):

  • tests/stress/direct-arguments-override-length-then-access-normal-length.js: Added.

(args):
(foo):
(result.foo):

LayoutTests:

  • js/regress/direct-arguments-length-expected.txt: Added.
  • js/regress/direct-arguments-length.html: Added.
  • js/regress/direct-arguments-overridden-length-expected.txt: Added.
  • js/regress/direct-arguments-overridden-length.html: Added.
  • js/regress/direct-arguments-possibly-overridden-length-expected.txt: Added.
  • js/regress/direct-arguments-possibly-overridden-length.html: Added.
  • js/regress/scoped-arguments-length-expected.txt: Added.
  • js/regress/scoped-arguments-length.html: Added.
  • js/regress/scoped-arguments-overridden-length-expected.txt: Added.
  • js/regress/scoped-arguments-overridden-length.html: Added.
  • js/regress/scoped-arguments-possibly-overridden-length-expected.txt: Added.
  • js/regress/scoped-arguments-possibly-overridden-length.html: Added.
  • js/regress/script-tests/direct-arguments-length.js: Added.

(args):

  • js/regress/script-tests/direct-arguments-overridden-length.js: Added.

(args):

  • js/regress/script-tests/direct-arguments-possibly-overridden-length.js: Added.

(args1):
(args2):

  • js/regress/script-tests/scoped-arguments-length.js: Added.

(args):

  • js/regress/script-tests/scoped-arguments-overridden-length.js: Added.

(args):

  • js/regress/script-tests/scoped-arguments-possibly-overridden-length.js: Added.

(args1):
(args2):

11:55 AM Changeset in webkit [199239] by bshafiei@apple.com
  • 5 edits in branches/safari-601-branch/Source

Versioning.

11:32 AM Changeset in webkit [199238] by Beth Dakin
  • 2 edits in trunk/Source/WebCore

Fix leaks in WebAVMediaSelectionOptionMac and WebPlaybackControlsManager
https://bugs.webkit.org/show_bug.cgi?id=156379

Reviewed by Tim Horton.

These classes should use RetainPtrs.

  • platform/mac/WebVideoFullscreenInterfaceMac.mm:

(-[WebAVMediaSelectionOptionMac localizedDisplayName]):
(-[WebAVMediaSelectionOptionMac setLocalizedDisplayName:]):
(-[WebPlaybackControlsManager timing]):
(-[WebPlaybackControlsManager setTiming:]):
(-[WebPlaybackControlsManager seekableTimeRanges]):
(-[WebPlaybackControlsManager setSeekableTimeRanges:]):
(-[WebPlaybackControlsManager audioMediaSelectionOptions]):
(-[WebPlaybackControlsManager setAudioMediaSelectionOptions:]):
(-[WebPlaybackControlsManager currentAudioMediaSelectionOption]):
(-[WebPlaybackControlsManager setCurrentAudioMediaSelectionOption:]):
(-[WebPlaybackControlsManager legibleMediaSelectionOptions]):
(-[WebPlaybackControlsManager setLegibleMediaSelectionOptions:]):
(-[WebPlaybackControlsManager currentLegibleMediaSelectionOption]):
(-[WebPlaybackControlsManager setCurrentLegibleMediaSelectionOption:]):

11:28 AM Changeset in webkit [199237] by commit-queue@webkit.org
  • 2 edits in trunk/Source/WebCore

Touching any IDL files rebuilds all bindings in CMake Ninja build
https://bugs.webkit.org/show_bug.cgi?id=156400

Patch by Fujii Hironori <Hironori.Fujii@jp.sony.com> on 2016-04-08
Reviewed by Brent Fulgham.

  • bindings/scripts/preprocess-idls.pl:

(GenerateConstructorAttribute):
WriteFileIfChanged does not work due to flaky results of 'keys'.
Sort results of 'keys'.

11:18 AM Changeset in webkit [199236] by Joseph Pecoraro
  • 3 edits in trunk/LayoutTests

Redefining a method of the same name hits an assertion
https://bugs.webkit.org/show_bug.cgi?id=144258

Reviewed by Ryosuke Niwa.

This test no longer asserts.

11:07 AM Changeset in webkit [199235] by commit-queue@webkit.org
  • 6 edits
    1 add in trunk/Source/JavaScriptCore

UInt32ToNumber should have an Int52 path
https://bugs.webkit.org/show_bug.cgi?id=125704

Patch by Benjamin Poulain <bpoulain@apple.com> on 2016-04-08
Reviewed by Filip Pizlo.

When dealing with big numbers, fall back to Int52 instead
of double when possible.

  • dfg/DFGAbstractInterpreterInlines.h:

(JSC::DFG::AbstractInterpreter<AbstractStateType>::executeEffects):

  • dfg/DFGFixupPhase.cpp:

(JSC::DFG::FixupPhase::fixupNode):

  • dfg/DFGPredictionPropagationPhase.cpp:

(JSC::DFG::PredictionPropagationPhase::propagate):

  • dfg/DFGSpeculativeJIT.cpp:

(JSC::DFG::SpeculativeJIT::compileUInt32ToNumber):

  • ftl/FTLLowerDFGToB3.cpp:

(JSC::FTL::DFG::LowerDFGToB3::compileUInt32ToNumber):

10:50 AM Changeset in webkit [199234] by commit-queue@webkit.org
  • 2 edits in trunk/Source/WebKit

[cmake] Use ICU include dirs in WebKit.
https://bugs.webkit.org/show_bug.cgi?id=156402

Patch by Konstantin Tokarev <Konstantin Tokarev> on 2016-04-08
Reviewed by Brent Fulgham.

  • CMakeLists.txt:
10:22 AM Changeset in webkit [199233] by Simon Fraser
  • 19 edits in trunk/Source

[iOS WK2] Stop using exposedContentRect for history scroll state restoration
https://bugs.webkit.org/show_bug.cgi?id=156392

Reviewed by Tim Horton.

A future commit will alter the meaning of exposedContentRect on iOS to take into
account clipped out parts of the WKWebView. To achieve this, wean history restoration
off of using exposedContentRect for scroll state restoration. It did this to restore
the page to the same position relative to the view's top-left (to avoid jiggles caused
by changing obscured insets).

Do this by pushing the left/top obscured insets down with visible content rects updates,
storing them on ScrollView, and adding them to HistoryItem. Those insets are then used
for scroll state restoration in WKWebView.

Source/WebCore:

  • history/HistoryItem.cpp:

(WebCore::HistoryItem::HistoryItem):

  • history/HistoryItem.h:

(WebCore::HistoryItem::obscuredInset):
(WebCore::HistoryItem::setObscuredInset):

  • loader/HistoryController.cpp:

(WebCore::HistoryController::saveScrollPositionAndViewStateToItem):

  • platform/ScrollView.h:

(WebCore::ScrollView::platformObscuredInset):
(WebCore::ScrollView::platformSetObscuredInset):

Source/WebKit2:

  • Shared/VisibleContentRectUpdateInfo.cpp: Add FloatSize for obscuredInset.

(WebKit::VisibleContentRectUpdateInfo::encode):
(WebKit::VisibleContentRectUpdateInfo::decode):

  • Shared/VisibleContentRectUpdateInfo.h:

(WebKit::VisibleContentRectUpdateInfo::VisibleContentRectUpdateInfo):
(WebKit::VisibleContentRectUpdateInfo::obscuredInset):
(WebKit::operator==):

  • UIProcess/API/Cocoa/WKWebView.mm:

(-[WKWebView _processDidExit]): Rename _needsToRestoreExposedRect to _needsToRestoreScrollPosition
(-[WKWebView _didCommitLayerTree:]): Restore the scroll position using the scaled scrollOffset minus
the old obscuredInset.
(-[WKWebView _layerTreeCommitComplete]):
(-[WKWebView _restorePageScrollPosition:scrollOrigin:previousObscuredInset:scale:]):
(-[WKWebView _restorePageStateToUnobscuredCenter:scale:]):
(-[WKWebView _scrollToContentScrollPosition:scrollOrigin:]):
(-[WKWebView _updateVisibleContentRects]):
(-[WKWebView _restorePageStateToExposedRect:scrollOrigin:scale:]): Deleted.

  • UIProcess/API/Cocoa/WKWebViewInternal.h:
  • UIProcess/PageClient.h:
  • UIProcess/WebPageProxy.h:
  • UIProcess/WebPageProxy.messages.in:
  • UIProcess/ios/PageClientImplIOS.h:
  • UIProcess/ios/PageClientImplIOS.mm:

(WebKit::PageClientImpl::restorePageState):

  • UIProcess/ios/WKContentView.h:
  • UIProcess/ios/WKContentView.mm:

(-[WKContentView didUpdateVisibleRect:unobscuredRect:unobscuredRectInScrollViewCoordinates:obscuredInset:scale:minimumScale:inStableState:isChangingObscuredInsetsInteractively:]):
(-[WKContentView didUpdateVisibleRect:unobscuredRect:unobscuredRectInScrollViewCoordinates:scale:minimumScale:inStableState:isChangingObscuredInsetsInteractively:]): Deleted.

  • UIProcess/ios/WebPageProxyIOS.mm:

(WebKit::WebPageProxy::updateVisibleContentRects):
(WebKit::WebPageProxy::restorePageState):

  • WebProcess/WebPage/ios/WebPageIOS.mm:

(WebKit::WebPage::restorePageState):
(WebKit::WebPage::updateVisibleContentRects):

10:21 AM Changeset in webkit [199232] by beidson@apple.com
  • 2 edits in trunk/Source/WebCore

Build fix followup to http://trac.webkit.org/changeset/199230

Unreviewed.

  • platform/posix/FileSystemPOSIX.cpp:

(WebCore::hardLinkOrCopyFile): Stricter POSIX systems require a umask for O_CREAT opens,

so let's provide one.

9:59 AM Changeset in webkit [199231] by Darin Adler
  • 16 edits in trunk/Source/WebCore

Remove 14 more unnecessary uses of UsePointersEvenForNonNullableObjectArguments
https://bugs.webkit.org/show_bug.cgi?id=156405

Reviewed by Chris Dumez.

  • Modules/encryptedmedia/MediaKeySession.idl:
  • Modules/encryptedmedia/MediaKeys.idl:
  • dom/Element.idl:
  • dom/NamedNodeMap.idl:
  • html/HTMLElement.idl:
  • html/canvas/OESVertexArrayObject.idl:
  • html/canvas/WebGLRenderingContext.idl:
  • page/DOMSelection.idl:
  • storage/StorageEvent.idl:
  • svg/SVGSVGElement.idl:
  • xml/XMLSerializer.idl:
  • xml/XPathEvaluator.idl:
  • xml/XPathExpression.idl:
  • xml/XSLTProcessor.idl:

Removed UsePointersEvenForNonNullableObjectArguments, which was having no effect
in any of these classes. Also tweaked formatting of some of the IDL, merging things
onto single lines, changing paragraphing and indenting a bit, and fixing some typos.

9:57 AM Changeset in webkit [199230] by beidson@apple.com
  • 27 edits in trunk/Source

Modern IDB (Blob support): Write blobs to temporary files and move them to the correct location when storing them.
https://bugs.webkit.org/show_bug.cgi?id=156321

Reviewed by Alex Christensen, Andy Estes, and Darin Adler.

Source/WebCore:

No new tests (No testable change in behavior yet, current tests pass).

When asked to store a Blob (including Files) in IndexedDB, the Blob is written out to a temporary file.

Then when the putOrAdd request is received by IDBServer it includes a list of blobURLs and their mappings
to temporary files.

Finally, as part of storing the Blob value in the database, those temporary files are moved in to place
under the IndexedDB directory for storage and later retrieval.

  • Modules/indexeddb/IDBValue.cpp:

(WebCore::IDBValue::IDBValue):

  • Modules/indexeddb/server/IDBBackingStore.h:

(WebCore::IDBServer::IDBBackingStoreTemporaryFileHandler::~IDBBackingStoreTemporaryFileHandler):

  • Modules/indexeddb/server/IDBServer.cpp:

(WebCore::IDBServer::IDBServer::create):
(WebCore::IDBServer::IDBServer::IDBServer):
(WebCore::IDBServer::IDBServer::createBackingStore):

  • Modules/indexeddb/server/IDBServer.h:
  • Modules/indexeddb/server/SQLiteIDBBackingStore.cpp:

(WebCore::IDBServer::blobRecordsTableSchema):
(WebCore::IDBServer::blobRecordsTableSchemaAlternate):
(WebCore::IDBServer::blobFilesTableSchema):
(WebCore::IDBServer::blobFilesTableSchemaAlternate):
(WebCore::IDBServer::SQLiteIDBBackingStore::SQLiteIDBBackingStore):
(WebCore::IDBServer::SQLiteIDBBackingStore::ensureValidBlobTables):
(WebCore::IDBServer::SQLiteIDBBackingStore::getOrEstablishDatabaseInfo):
(WebCore::IDBServer::SQLiteIDBBackingStore::addRecord):

  • Modules/indexeddb/server/SQLiteIDBBackingStore.h:

(WebCore::IDBServer::SQLiteIDBBackingStore::temporaryFileHandler):

  • Modules/indexeddb/server/SQLiteIDBTransaction.cpp:

(WebCore::IDBServer::SQLiteIDBTransaction::commit):
(WebCore::IDBServer::SQLiteIDBTransaction::moveBlobFilesIfNecessary):
(WebCore::IDBServer::SQLiteIDBTransaction::abort):
(WebCore::IDBServer::SQLiteIDBTransaction::reset):
(WebCore::IDBServer::SQLiteIDBTransaction::addBlobFile):

  • Modules/indexeddb/server/SQLiteIDBTransaction.h:
  • Modules/indexeddb/shared/InProcessIDBServer.cpp:

(WebCore::InProcessIDBServer::InProcessIDBServer):
(WebCore::InProcessIDBServer::accessToTemporaryFileComplete):

  • Modules/indexeddb/shared/InProcessIDBServer.h:
  • bindings/js/SerializedScriptValue.cpp:

(WebCore::SerializedScriptValue::blobURLsIsolatedCopy):

  • bindings/js/SerializedScriptValue.h:
  • platform/FileSystem.h:
  • platform/gtk/FileSystemGtk.cpp:

(WebCore::hardLinkOrCopyFile):

  • platform/posix/FileSystemPOSIX.cpp:

(WebCore::hardLinkOrCopyFile):

Source/WebKit2:

The NetworkProcess writes a blob to a temporary file, then tells the UIProcess to grant the DatabaseProcess
a Sandbox Extension to that path.

It then tells the WebProcess the paths for the temporary files, which then tells the DatabaseProcess to store
the contents of those files as blob references in the database.

Since the UIProcess had already granted it a Sandbox Extension, it is able to do so.

  • DatabaseProcess/DatabaseProcess.cpp:

(WebKit::DatabaseProcess::idbServer):
(WebKit::DatabaseProcess::grantSandboxExtensionsForBlobs):
(WebKit::DatabaseProcess::prepareForAccessToTemporaryFile):
(WebKit::DatabaseProcess::accessToTemporaryFileComplete):

  • DatabaseProcess/DatabaseProcess.h:
  • DatabaseProcess/DatabaseProcess.messages.in:
  • NetworkProcess/NetworkConnectionToWebProcess.cpp:

(WebKit::NetworkConnectionToWebProcess::writeBlobsToTemporaryFiles):

  • NetworkProcess/NetworkProcess.cpp:

(WebKit::NetworkProcess::grantSandboxExtensionsToDatabaseProcessForBlobs):
(WebKit::NetworkProcess::didGrantSandboxExtensionsToDatabaseProcessForBlobs):

  • NetworkProcess/NetworkProcess.h:
  • NetworkProcess/NetworkProcess.messages.in:
  • UIProcess/Network/NetworkProcessProxy.cpp:

(WebKit::NetworkProcessProxy::grantSandboxExtensionsToDatabaseProcessForBlobs):

  • UIProcess/Network/NetworkProcessProxy.h:
  • UIProcess/Network/NetworkProcessProxy.messages.in:
9:40 AM WebKitGTK/2.12.x edited by jdiggs@igalia.com
Replace bug link with changeset link now that patch has landed (diff)
9:39 AM WebKitGTK/2.10.x edited by jdiggs@igalia.com
Replace bug link with changeset link now that patch has landed (diff)
9:36 AM Changeset in webkit [199229] by jdiggs@igalia.com
  • 4 edits
    3 adds in trunk

AX: [ATK] Crash getting text under element in CSS table
https://bugs.webkit.org/show_bug.cgi?id=156328

Reviewed by Chris Fleizach.

Source/WebCore:

AccessibilityRenderObject::textUnderElement() assumes (and asserts) that
the first and last child of an anonymous block will each have nodes with
which to define positions. This is not the case for CSS Tables and their
anonymous descendants. AccessibilityNodeObject:textUnderElement() is our
fallback for the instances where a text range cannot be created based on
positions, so let it handle anonymous RenderTable parts.

Test: accessibility/generated-content-with-display-table-crash.html

  • accessibility/AccessibilityRenderObject.cpp:

(WebCore::AccessibilityRenderObject::textUnderElement):
(WebCore::AccessibilityRenderObject::shouldGetTextFromNode):

  • accessibility/AccessibilityRenderObject.h:

LayoutTests:

While this crash is currently seen only for ATK, there is nothing to
prevent another port from attempting to get all the text under a CSS
RenderTable. Hence the shared test.

  • accessibility/generated-content-with-display-table-crash.html: Added.
  • platform/gtk/accessibility/generated-content-with-display-table-crash-expected.txt: Added.
  • platform/mac/accessibility/generated-content-with-display-table-crash-expected.txt: Added.
9:11 AM Changeset in webkit [199228] by youenn.fablet@crf.canon.fr
  • 2 edits in trunk/LayoutTests

Unreviewed.
Rebasing LayoutTests/imported/w3c/web-platform-tests/dom/nodes/MutationObserver-childList.html expectation after https://trac.webkit.org/changeset/199225.
Removing its Timeout expectation.

9:05 AM Changeset in webkit [199227] by Matt Baker
  • 3 edits in trunk/Source/WebInspectorUI

Web Inspector: Attempting to dismiss a popover that is already being dismissed causes an error
https://bugs.webkit.org/show_bug.cgi?id=156385
<rdar://problem/25617962>

Reviewed by Timothy Hatcher.

The Popover element is removed from the DOM once it's fade-out transition
completes. Since Popover.dismiss proceeds as long as it's element has a
parent, successive calls to dismiss can run before the popover is removed.

Rather than rely on the presence of the popover in the DOM, set a "dismissing"
flag the first time dismiss is called, before the fade-out animation begins.

  • UserInterface/Controllers/BreakpointPopoverController.js:

(WebInspector.BreakpointPopoverController.prototype._conditionCodeMirrorEscapeOrEnterKey):
Check for null popover.

  • UserInterface/Views/Popover.js:

(WebInspector.Popover):
(WebInspector.Popover.prototype.dismiss):
Do nothing if already dismissing.

(WebInspector.Popover.prototype.handleEvent):
Reset dismissing flag after style transition completes.

9:04 AM Changeset in webkit [199226] by Matt Baker
  • 5 edits in trunk

Web Inspector: Quick Open fails to match pattern "bB" in file "abBc"
https://bugs.webkit.org/show_bug.cgi?id=156398

Reviewed by Timothy Hatcher.

Source/WebInspectorUI:

Correct an off-by-one error in the backtrack routine that set the dead
branch index to the character just before the match that was popped.
The dead branch index should equal the index of the popped match.

  • UserInterface/Controllers/ResourceQueryController.js:

(WebInspector.ResourceQueryController.prototype._findQueryMatches.backtrack):
(WebInspector.ResourceQueryController.prototype._findQueryMatches):

LayoutTests:

  • inspector/unit-tests/resource-query-controller-expected.txt:
  • inspector/unit-tests/resource-query-controller.html:

Test that two repeated characters in the search string are correctly
matched when the first character is lowercase and the second is uppercase.

7:45 AM Changeset in webkit [199225] by youenn.fablet@crf.canon.fr
  • 13 edits
    2 adds in trunk

LayoutTests/imported/w3c:
Testharness-based tests that time out should be able to produce detailed output
https://bugs.webkit.org/show_bug.cgi?id=145313

Reviewed by Xabier Rodriguez-Calvar.

Rebasing tests that produce output after testharness timeout() is called.

  • web-platform-tests/fetch/api/request/request-cache-expected.txt:
  • web-platform-tests/html/semantics/document-metadata/the-link-element/link-style-error-01-expected.txt:
  • web-platform-tests/html/semantics/document-metadata/the-style-element/style-error-01-expected.txt:
  • web-platform-tests/html/semantics/embedded-content/the-img-element/environment-changes/viewport-change-expected.txt:

Tools:
Testharness-based tests that time out should be able to produce a detailed output
https://bugs.webkit.org/show_bug.cgi?id=145313

Reviewed by Xabier Rodriguez-Calvar.

Adding timeout readonly accessor to TestRunner for both WK1 and WK2.

  • DumpRenderTree/TestRunner.cpp:

(getTimeoutCallback): The js "timeout" property getter.
(TestRunner::staticValues): Adding "timeout" property to DumpRenderTree so that testRunner.timeout called from JS returns the timeout value.

  • DumpRenderTree/TestRunner.h:

(TestRunner::timeout): Adding access to DRT m_timeout private value.

  • WebKitTestRunner/InjectedBundle/Bindings/TestRunner.idl: Adding timeout readonly attribute so that testRunner.timeout can be called from JS.
  • WebKitTestRunner/InjectedBundle/TestRunner.h: Adding DOM timeout getter to implement timeout IDL definition.

(WTR::TestRunner::timeout):

LayoutTests:
Testharness-based tests that time out should be able to produce a detailled output
https://bugs.webkit.org/show_bug.cgi?id=145313

Reviewed by Xabier Rodriguez-Calvar.

  • TestExpectations: Removed TIMEOUT for some tests for which testharness.timeout will be called just before WTR times out.
  • platform/gtk/imported/w3c/web-platform-tests/fetch/api/request/request-cache-expected.txt: GTK specific baseline.
  • resources/testharnessreport.js:

(add_completion_callback): Improving error logging message. Dumping of the tests status in error case.

2:04 AM Changeset in webkit [199224] by Darin Adler
  • 9 edits in trunk/Source/WebCore

Remove unneeded UsePointersEvenForNonNullableObjectArguments from event classes
https://bugs.webkit.org/show_bug.cgi?id=156396

Reviewed by Youenn Fablet.

  • dom/CompositionEvent.idl:
  • dom/KeyboardEvent.idl:
  • dom/MouseEvent.idl:
  • dom/MutationEvent.idl:
  • dom/TextEvent.idl:
  • dom/TouchEvent.idl:
  • dom/UIEvent.idl:
  • dom/WheelEvent.idl:

Removed UsePointersEvenForNonNullableObjectArguments, which was having no effect.

1:52 AM Changeset in webkit [199223] by Manuel Rego Casasnovas
  • 3 edits
    4 adds in trunk

[css-grid] Fix positioned items with grid gaps
https://bugs.webkit.org/show_bug.cgi?id=156288

Reviewed by Darin Adler.

Source/WebCore:

When we place a positioned items in a grid with gaps,
we were not taking into accounts the gutter size.
We've to use that size to properly place and size the item.

Tests: fast/css-grid-layout/grid-positioned-items-gaps-rtl.html

fast/css-grid-layout/grid-positioned-items-gaps.html

  • rendering/RenderGrid.cpp:

(WebCore::RenderGrid::offsetAndBreadthForPositionedChild):

LayoutTests:

Added new tests checking the right behavior.

  • fast/css-grid-layout/grid-positioned-items-gaps-expected.txt: Added.
  • fast/css-grid-layout/grid-positioned-items-gaps-rtl-expected.txt: Added.
  • fast/css-grid-layout/grid-positioned-items-gaps-rtl.html: Added.
  • fast/css-grid-layout/grid-positioned-items-gaps.html: Added.
1:01 AM Changeset in webkit [199222] by jfernandez@igalia.com
  • 2 edits in trunk/Source/WebCore

[css-grid] Remove unnecessary iteration in populateGridPositions loop
https://bugs.webkit.org/show_bug.cgi?id=156376

Reviewed by Darin Adler.

The populateGridPositions loop limit was set to 'lastLine'. However, the
the position of last track's start line is updated after the loop, since
it does not follow the same pattern; it does not have a content
distribution offset.

So, since we are essentially overwriting the value stored in the last
iteration, we can just lower the loop limit.

No new tests added, because there is no change in the functionality.

  • rendering/RenderGrid.cpp:

(WebCore::RenderGrid::populateGridPositions):

12:17 AM Changeset in webkit [199221] by commit-queue@webkit.org
  • 11 edits in trunk

CSP: Block XHR when calling XMLHttpRequest.send() and throw network error.
https://bugs.webkit.org/show_bug.cgi?id=153598
<rdar://problem/24391483>

Patch by John Wilander <wilander@apple.com> on 2016-04-08
Reviewed by Darin Adler.

Source/WebCore:

No new tests. Changes to existing tests are sufficient.

  • xml/XMLHttpRequest.cpp:

(WebCore::XMLHttpRequest::open):
(WebCore::XMLHttpRequest::initSend):

Moved the CSP check from XMLHttpRequest::open() to XMLHttpRequest::initSend().
Changed the thrown error type from Security to Network for synchronous requests.
Changed from throwing an error to firing an error event for asynchronous requests.
These changes are in conformance with connect-src of Content Security Policy Level 2.
https://www.w3.org/TR/CSP2/#directive-connect-src (W3C Candidate Recommendation, 21 July 2015)

LayoutTests:

  • fast/workers/resources/worker-inherits-csp-blocks-xhr.js:

(catch):

  • fast/workers/worker-inherits-csp-blocks-xhr-expected.txt:

Changed expected error from DOMException.SECURITY_ERR to DOMException.NETWORK_ERR.

  • http/tests/security/contentSecurityPolicy/connect-src-xmlhttprequest-blocked-expected.txt:
  • http/tests/security/contentSecurityPolicy/connect-src-xmlhttprequest-blocked.html:

Now tests that XMLHttpRequest.send() is blocked if the URL voilates the connect-src directive in CSP.

  • http/tests/security/contentSecurityPolicy/resources/worker.php:

Added two additional calls to XMLHttpRequest.send() and switched to receiving an error event to make
existing tests work with code changes.

  • http/tests/security/contentSecurityPolicy/source-list-parsing-malformed-meta.html:

Added an additional call to XMLHttpRequest.send() and switched to receiving an error event to make
existing test work with code changes.

  • http/tests/security/isolatedWorld/bypass-main-world-csp-for-xhr-expected.txt:
  • http/tests/security/isolatedWorld/bypass-main-world-csp-for-xhr.html:

Added an additional call to XMLHttpRequest.send() and switched to receiving an error event to make
existing tests work with code changes.
Refactored test mechnism with additional parameters to cover synchronous/asynchronous as well as
same-origin/cross-origin in isolated worlds.

12:15 AM Changeset in webkit [199220] by rniwa@webkit.org
  • 5 edits
    2 adds in trunk/Websites/perf.webkit.org

Fix various bugs in the new syncing script
https://bugs.webkit.org/show_bug.cgi?id=156393

Reviewed by Darin Adler.

  • server-tests/resources/common-operations.js: Added. This file was supposed to be added in r199191.

(addBuilderForReport):
(addSlaveForReport):
(connectToDatabaseInEveryTest):
(submitReport):

  • tools/js/buildbot-triggerable.js:

(BuildbotTriggerable.prototype._pullBuildbotOnAllSyncers): Don't log every time we pull from buildbot
builder as this dramatically increases the amount of log we generate.

  • tools/js/parse-arguments.js:

(parseArguments): Fixed a typo. This should be parseArgument*s*, not parseArgument.

  • tools/js/remote.js:

(RemoteAPI.prototype.url): Fixed a bug that portSuffix wasn't being expanded in the template literal.
(RemoteAPI.prototype.configure): Added more validations with nice error messages.
(RemoteAPI.prototype.sendHttpRequest): Falling back to port 80 isn't right when scheme is https. Compute
the right port in configure instead based on the scheme.

  • tools/sync-buildbot.js:

(syncLoop): Fixed the bug that syncing multiple times fail because Manifest.fetch() create new Platform
and Test objects. This results in various references in BuildRequest objects to get outdated. Fixing this
properly in Manifest.fetch() because we do need to "forget" about some tests and platforms in some cases.
For now, delete all v3 model objects and start over in each syncing cycle.

  • unit-tests/tools-js-remote-tests.js: Added. Unit tests for the aforementioned changes to RemoteAPI.
12:13 AM Changeset in webkit [199219] by Brian Burg
  • 4 edits
    2 adds in trunk/Source/JavaScriptCore

Web Inspector: protocol generator should emit an error when 'type' is used instead of '$ref'
https://bugs.webkit.org/show_bug.cgi?id=156275
<rdar://problem/25569331>

Reviewed by Darin Adler.

  • inspector/protocol/Heap.json: Fix a mistake that's now caught by the protocol generator.
  • inspector/scripts/codegen/models.py:

(TypeReference.init): Check here if type_kind is on a whitelist of primitive types.
(TypeReference.referenced_name): Update comment.

Add a new test specifically for the case when the type would otherwise be resolved. Rebaseline.

  • inspector/scripts/tests/expected/fail-on-type-reference-as-primitive-type.json-error: Added.
  • inspector/scripts/tests/expected/fail-on-unknown-type-reference-in-type-declaration.json-error:
  • inspector/scripts/tests/fail-on-type-reference-as-primitive-type.json: Added.
12:08 AM Changeset in webkit [199218] by Yusuke Suzuki
  • 2 edits in trunk/Source/WTF

[JSC] Enable Concurrent JIT by default
https://bugs.webkit.org/show_bug.cgi?id=156341

Reviewed by Filip Pizlo.

We enable Concurrent JIT by default when DFG JIT and JSVALUE64 are enabled.
This change offers Concurrent JIT to the JSCOnly port.

  • wtf/Platform.h:

Apr 7, 2016:

10:04 PM Changeset in webkit [199217] by commit-queue@webkit.org
  • 2 edits in trunk/Tools

stylebot should know about TestWebKitAPI FeatureDefines.xcconfig
https://bugs.webkit.org/show_bug.cgi?id=156387

Patch by Joseph Pecoraro <Joseph Pecoraro> on 2016-04-07
Rubber-stamped by Dan Bernstein.

  • Scripts/webkitpy/style/checkers/featuredefines.py:

(FeatureDefinesChecker.check):

9:26 PM Changeset in webkit [199216] by Darin Adler
  • 7 edits in trunk

FontFaceSet binding does not handle null correctly
https://bugs.webkit.org/show_bug.cgi?id=156141

Reviewed by Youenn Fablet.

Source/WebCore:

  • css/FontFaceSet.cpp:

(WebCore::FontFaceSet::FontFaceSet): Pass a reference to add rather than a pointer.
(WebCore::FontFaceSet::has): Take a reference rather than a pointer.
(WebCore::FontFaceSet::add): Ditto.
(WebCore::FontFaceSet::remove): Ditto.
(WebCore::FontFaceSet::load): Initialize ec since we check it. Caller is not required
to do this, nor is the matchingFaces function. Rearranged function to avoid needless
creation/destruction of PendingPromise for the immediate failure case. Removed some
unneeded type casts and local variables.
(WebCore::FontFaceSet::status): Use ASCIILiteral instead of ConstructFromLiteral.
No reason to use the more aggressive optimization.
(WebCore::FontFaceSet::faceFinished): Factored out a common hasReachedTerminalState
check to streamline the logic a bit.
(WebCore::FontFaceSet::load): Moved overload without a string in here; not critical
to inline it.
(WebCore::FontFaceSet::check): Ditto.

  • css/FontFaceSet.h: Removed many unneeded includes and forward declarations.

Changed functions to take FontFace& instead of RefPtr<FontFace>. Removed unneeded
WebCore namespace prefixes. Use final instead of override for virtual functions.

  • css/FontFaceSet.idl: Removed UsePointersEvenForNonNullableObjectArguments, which

was preserving incorrect behavior for null as demonstrated by the test cases.

LayoutTests:

  • fast/text/font-face-set-javascript-expected.txt: Added expected results for new tests.
  • fast/text/font-face-set-javascript.html: Added tests for handling of null, also added tests for

the has function.

9:21 PM Changeset in webkit [199215] by rniwa@webkit.org
  • 3 edits in trunk/Websites/perf.webkit.org

sync-buildbot.js doesn't mark disappeared builds as failed
https://bugs.webkit.org/show_bug.cgi?id=156386

Reviewed by Chris Dumez.

Fix a bug that new syncing script doesn't mark builds that it scheduled but doesn't appear when queried
by buildbot's JSON API. These are builds that got canceled by humans (e.g. buildbot was restarted, data
loss, pending build was canceled, etc...)

  • server-tests/tools-buildbot-triggerable-tests.js: Added a test case.
  • tools/js/buildbot-triggerable.js:

(BuildbotTriggerable.prototype._pullBuildbotOnAllSyncers): Added a set of build requests we've matched
against BuildbotBuildEntry's. Mark build requests that didn't have any entry but supposed to be in either
'scheduled' or 'running' status as failed.

9:17 PM Changeset in webkit [199214] by commit-queue@webkit.org
  • 17 edits in trunk

Remove ENABLE(ENABLE_ES6_CLASS_SYNTAX) guards
https://bugs.webkit.org/show_bug.cgi?id=156384

Patch by Joseph Pecoraro <Joseph Pecoraro> on 2016-04-07
Reviewed by Ryosuke Niwa.

.:

  • Source/cmake/WebKitFeatures.cmake:

Source/JavaScriptCore:

  • Configurations/FeatureDefines.xcconfig:
  • features.json: Mark as Done.
  • parser/Parser.cpp:

(JSC::Parser<LexerType>::parseExportDeclaration):
(JSC::Parser<LexerType>::parseStatementListItem):
(JSC::Parser<LexerType>::parsePrimaryExpression):
(JSC::Parser<LexerType>::parseMemberExpression):

Source/WebCore:

  • Configurations/FeatureDefines.xcconfig:

Source/WebKit/mac:

  • Configurations/FeatureDefines.xcconfig:

Source/WebKit2:

  • Configurations/FeatureDefines.xcconfig:

Source/WTF:

  • wtf/FeatureDefines.h:

Tools:

  • Scripts/webkitperl/FeatureList.pm:
  • TestWebKitAPI/Configurations/FeatureDefines.xcconfig:
8:59 PM Changeset in webkit [199213] by dino@apple.com
  • 3 edits in trunk/Source/WebCore

[iOS] Media playback button should use appearance
https://bugs.webkit.org/show_bug.cgi?id=156388

Reviewed by Simon Fraser.

With the recent change in backdrop appearance, we can
now use the system style directly for the play button.

While I was here I also updated the artwork to the
latest style (slightly rounded corners on the triangle).

Covered by the test in ManualTests/ios/start-playback-button-appearance.html.

  • Modules/mediacontrols/mediaControlsiOS.css: Move the clip onto the backdrop

element. Use an appearance insted.

  • Modules/mediacontrols/mediaControlsiOS.js: Remove the tint element, and

set the highlight on the glyph instead.

8:59 PM Changeset in webkit [199212] by dino@apple.com
  • 3 edits
    2 adds in trunk

[iOS] Play button on video is too dark
https://bugs.webkit.org/show_bug.cgi?id=156383
<rdar://problem/23540816>

Reviewed by Simon Fraser.

.:

Add a manual test for iOS that shows the expected appearance
of a video element. Unfortunately, due to the way we take
snapshots on iOS within our test runner, we don't get the
platform blurring effect, which means an automated test
won't work.

  • ManualTests/ios/start-playback-button-appearance-expected.html: Added.
  • ManualTests/ios/start-playback-button-appearance.html: Added.

Source/WebKit2:

Elements that are backed by a layer with either LightBackdropAppearance
or DarkBackdropAppearance are actually a combination of a
few layers (inside a special view). If we apply a mask to one
of those layers, it needs to be attached to the correct
child layer.

  • Shared/mac/RemoteLayerTreePropertyApplier.mm:

(WebKit::RemoteLayerTreePropertyApplier::applyProperties): If we have
one of the special appearance flags, apply the mask layer to
a particular child, rather than the layer itself.

8:58 PM Changeset in webkit [199211] by dino@apple.com
  • 2 edits in trunk/Tools

Watchlist modifications:

  • remove roger_fong
  • add myself to a few areas
  • remove graouts from WebInspectorAPI
  • Scripts/webkitpy/common/config/watchlist:
8:19 PM Changeset in webkit [199210] by rniwa@webkit.org
  • 7 edits in trunk/Websites/perf.webkit.org

A/B testing bots should prioritize user created test groups
https://bugs.webkit.org/show_bug.cgi?id=156375

Reviewed by Chris Dumez.

Order build requests preferring user created ones over ones automatically created by detect-changes.js.

Also fixed a bug in BuildbotSyncer.scheduleFirstRequestInGroupIfAvailable that it was scheduling a new
build request on a builder/slave even when we had previously scheduled another build request.

  • public/include/build-requests-fetcher.php:

(BuildRequestsFetcher::fetch_incomplete_requests_for_triggerable): Order build requested based on
author_order which is 0 when it's created by an user and 1 when it's created by detect-changes.js.
Since we're using ascending order, this would put user created test groups first.

  • server-tests/api-build-requests-tests.js: Updated an existing test case and added a new test case

for testing that build requests for an user created test group shows up first.

  • server-tests/resources/mock-data.js:

(MockData.addAnotherMockTestGroup): Takes an extra argument to specify the author name.

  • server-tests/tools-buildbot-triggerable-tests.js: Added a test case for testing that build requests

for an user created test group shows up first.

  • tools/js/buildbot-syncer.js:

(BuildbotSyncer): Added _slavesWithNewRequests to keep track of build slaves on which we have already
scheduled new build requests. Don't schedule more requests on these slaves.
(BuildbotSyncer.prototype.scheduleRequest):
(BuildbotSyncer.prototype.scheduleFirstRequestInGroupIfAvailable): Add the specified slave name (or null
when slaveList is not specified) to _slavesWithNewRequests.
(BuildbotSyncer.prototype.pullBuildbot): Clear the set after pulling buildbot since any build request
we have previously scheduled should be included in one of the entires now.

  • unit-tests/buildbot-syncer-tests.js: Added test cases for the aforementioned bug.

(sampleiOSConfig): Added a second slave for new test cases.

7:11 PM Changeset in webkit [199209] by fpizlo@apple.com
  • 8 edits
    3 adds in trunk

Implementing caching transition puts that need to reallocate with indexing storage
https://bugs.webkit.org/show_bug.cgi?id=130914

Reviewed by Saam Barati.

Source/JavaScriptCore:

This enables the IC's put_by_id path to handle reallocating the out-of-line storage even if
the butterfly has indexing storage. Like the DFG, we do this by calling operations that
reallocate the butterfly. Those use JSObject API and do all of the nasty work for us, like
triggering a barrier.

This does a bunch of refactoring to how PolymorphicAccess makes calls. It's a lot easier to
do it now because the hard work is hidden under AccessGenerationState methods. This means
that custom accessors now share logic with put_by_id transitions.

  • bytecode/PolymorphicAccess.cpp:

(JSC::AccessGenerationState::succeed):
(JSC::AccessGenerationState::calculateLiveRegistersForCallAndExceptionHandling):
(JSC::AccessGenerationState::preserveLiveRegistersToStackForCall):
(JSC::AccessGenerationState::originalCallSiteIndex):
(JSC::AccessGenerationState::emitExplicitExceptionHandler):
(JSC::AccessCase::AccessCase):
(JSC::AccessCase::transition):
(JSC::AccessCase::generate):
(JSC::PolymorphicAccess::regenerate):

  • bytecode/PolymorphicAccess.h:

(JSC::AccessGenerationState::needsToRestoreRegistersIfException):
(JSC::AccessGenerationState::liveRegistersToPreserveAtExceptionHandlingCallSite):

  • dfg/DFGOperations.cpp:
  • dfg/DFGOperations.h:
  • jit/JITOperations.cpp:
  • jit/JITOperations.h:

LayoutTests:

  • js/regress/put-by-id-transition-with-indexing-header-expected.txt: Added.
  • js/regress/put-by-id-transition-with-indexing-header.html: Added.
  • js/regress/script-tests/put-by-id-transition-with-indexing-header.js: Added.

(allocate):

6:27 PM Changeset in webkit [199208] by commit-queue@webkit.org
  • 2 edits in trunk/Source/JavaScriptCore

Remote Inspector: When disallowing remote inspection on a debuggable, a listing is still sent to debuggers
https://bugs.webkit.org/show_bug.cgi?id=156380
<rdar://problem/25323727>

Patch by Joseph Pecoraro <Joseph Pecoraro> on 2016-04-07
Reviewed by Timothy Hatcher.

  • inspector/remote/RemoteInspector.mm:

(Inspector::RemoteInspector::updateTarget):
(Inspector::RemoteInspector::updateAutomaticInspectionCandidate):
When a target has been updated and it no longer generates a listing,
we should remove the old listing as that is now stale and should
not be sent. Not generating a listing means this target is no
longer allowed to be debugged.

6:24 PM Changeset in webkit [199207] by Matt Baker
  • 2 edits in trunk/Source/WebInspectorUI

Web Inspector: OpenResourceDialog should keep its resources list up-to-date
https://bugs.webkit.org/show_bug.cgi?id=155321
<rdar://problem/25093890>

Reviewed by Timothy Hatcher.

The Quick Open dialog should listen for resource change events, refreshing
the resource list and current query results as needed.

  • UserInterface/Views/OpenResourceDialog.js:

(WebInspector.OpenResourceDialog):
(WebInspector.OpenResourceDialog.prototype.didDismissDialog):
Unregister resource event handlers.

(WebInspector.OpenResourceDialog.prototype.didPresentDialog):
Register resource event handlers and add main frame resources.

(WebInspector.OpenResourceDialog.prototype._addResource):
Add resource to the query controller, if valid. Optionally suppress
the potentially expensive filter update, which is useful when adding
multiple resources at once.

(WebInspector.OpenResourceDialog.prototype._addResourcesForFrame):
Add the entire frame resource tree and update dialog filter.

(WebInspector.OpenResourceDialog.prototype._mainResourceDidChange):
(WebInspector.OpenResourceDialog.prototype._resourceWasAdded):

6:22 PM Changeset in webkit [199206] by adachan@apple.com
  • 6 edits in trunk

Roll out the css change in mediaControlsApple.css that has been causing assertions in layout for multiple tests
https://bugs.webkit.org/show_bug.cgi?id=156381

Rubber-stamped by Alexey Proskuryakov.

Source/WebCore:

  • Modules/mediacontrols/mediaControlsApple.css:

(::-webkit-media-controls):
Remove overflow: hidden.

LayoutTests:

  • platform/mac/TestExpectations:
  • platform/mac/media/media-document-audio-repaint-expected.txt:
  • platform/mac/media/video-zoom-controls-expected.txt:
5:40 PM Changeset in webkit [199205] by commit-queue@webkit.org
  • 3 edits in trunk/Source/JavaScriptCore

Web Inspector: Not necessary to validate webinspectord connection on iOS
https://bugs.webkit.org/show_bug.cgi?id=156377
<rdar://problem/25612460>

Patch by Joseph Pecoraro <Joseph Pecoraro> on 2016-04-07
Reviewed by Simon Fraser.

  • inspector/remote/RemoteInspectorXPCConnection.h:
  • inspector/remote/RemoteInspectorXPCConnection.mm:

(Inspector::RemoteInspectorXPCConnection::handleEvent):

5:19 PM Changeset in webkit [199204] by commit-queue@webkit.org
  • 2 edits in trunk/Source/WebKit2

Clearing the application cache doesn't work.
https://bugs.webkit.org/show_bug.cgi?id=156354
rdar://problem/22369239

Patch by Jeremy Jones <jeremyj@apple.com> on 2016-04-07
Reviewed by Brady Eidson.

Use the correct "ApplicationCache" directory.
Delete the caches, not just the entries.

  • UIProcess/WebsiteData/WebsiteDataStore.cpp:

(WebKit::WebsiteDataStore::fetchData):
(WebKit::WebsiteDataStore::removeData):

5:10 PM Changeset in webkit [199203] by keith_miller@apple.com
  • 3 edits in trunk/Source/JavaScriptCore

Rename ArrayMode::supportsLength to supportsSelfLength
https://bugs.webkit.org/show_bug.cgi?id=156374

Reviewed by Filip Pizlo.

The name supportsLength is confusing because TypedArray have a
length function however it is on the prototype and not on the
instance. supportsSelfLength makes more sense since we use the
function during fixup to tell if we can intrinsic the length
property lookup on self accesses.

  • dfg/DFGArrayMode.h:

(JSC::DFG::ArrayMode::supportsSelfLength):
(JSC::DFG::ArrayMode::supportsLength): Deleted.

  • dfg/DFGFixupPhase.cpp:

(JSC::DFG::FixupPhase::attemptToMakeGetArrayLength):

4:38 PM Changeset in webkit [199202] by jiewen_tan@apple.com
  • 5 edits
    2 deletes in trunk

Unreviewed, rolling out r199199.

Revision breaks layout tests

Reverted changeset:

"fast/loader/opaque-base-url.html crashing during mac and ios
debug tests"
https://bugs.webkit.org/show_bug.cgi?id=156179
http://trac.webkit.org/changeset/199199

4:28 PM Changeset in webkit [199201] by commit-queue@webkit.org
  • 4 edits in trunk/Source

Web Inspector: ProfileView source links are off by 1 line, worse in pretty printed code
https://bugs.webkit.org/show_bug.cgi?id=156371

Patch by Joseph Pecoraro <Joseph Pecoraro> on 2016-04-07
Reviewed by Timothy Hatcher.

Source/JavaScriptCore:

  • inspector/protocol/ScriptProfiler.json:

Clarify that these locations are 1-based.

Source/WebInspectorUI:

  • UserInterface/Views/ProfileDataGridNode.js:

(WebInspector.ProfileDataGridNode.prototype._displayContent):
Switch the 1-based locations in the CCT data structure to 0-based for SourceCodeLocation.

4:14 PM Changeset in webkit [199200] by Simon Fraser
  • 17 edits
    4 adds in trunk

Make it possible to test effect of view exposed rect on tiled backing
https://bugs.webkit.org/show_bug.cgi?id=156365

Reviewed by Tim Horton.

Source/WebCore:

Implement Internals::setViewExposedRect().

When the viewExposedRect is non-null, assume that we're scrollable on both axes
to avoid creation of huge tiles in this scenario.

We also need to call adjustTiledBackingScrollability() when setViewExposedRect()
has been called.

Tests: tiled-drawing/tile-coverage-view-exposed-rect.html

tiled-drawing/tile-size-view-exposed-rect.html

  • page/FrameView.cpp:

(WebCore::FrameView::adjustTiledBackingScrollability):
(WebCore::FrameView::setViewExposedRect):

  • testing/Internals.cpp:

(WebCore::Internals::setViewExposedRect):

  • testing/Internals.h:
  • testing/Internals.idl:

Tools:

Expose testRunner.setViewSize() and internals.setViewExposedRect() to enable
testing of tile coverage when setViewExposedRect() is passed a non-null rectangle.

testRunner.setViewSize() is used instead of using window.resizeTo(), since we
can't easily resize a window to larger than the screen being tested on.

  • DumpRenderTree/TestRunner.cpp:

(setViewSizeCallback):
(TestRunner::staticFunctions):

  • DumpRenderTree/TestRunner.h:
  • DumpRenderTree/mac/TestRunnerMac.mm:

(TestRunner::setViewSize):

  • WebKitTestRunner/InjectedBundle/Bindings/TestRunner.idl:
  • WebKitTestRunner/InjectedBundle/InjectedBundle.cpp:

(WTR::InjectedBundle::postSetViewSize):

  • WebKitTestRunner/InjectedBundle/InjectedBundle.h:
  • WebKitTestRunner/InjectedBundle/TestRunner.cpp:

(WTR::TestRunner::setViewSize):

  • WebKitTestRunner/InjectedBundle/TestRunner.h:
  • WebKitTestRunner/TestInvocation.cpp:

(WTR::TestInvocation::didReceiveSynchronousMessageFromInjectedBundle):

LayoutTests:

Tests for tile size and tile coverage when we have an exposed view rect.

  • tiled-drawing/tile-coverage-view-exposed-rect-expected.txt: Added.
  • tiled-drawing/tile-coverage-view-exposed-rect.html: Added.
  • tiled-drawing/tile-size-view-exposed-rect-expected.txt: Added.
  • tiled-drawing/tile-size-view-exposed-rect.html: Added.
3:44 PM Changeset in webkit [199199] by jiewen_tan@apple.com
  • 5 edits
    2 adds in trunk

fast/loader/opaque-base-url.html crashing during mac and ios debug tests
https://bugs.webkit.org/show_bug.cgi?id=156179
<rdar://problem/25507719>

Reviewed by Andy Estes.

Source/WebCore:

A relative URL other than "#" with a non-hierarchical base is invalid, but prior to this
change the URL's string would still contain the invalid relative URL. To avoid mistakes
where we might later treat this URL string as a parsed URL string, set the string to
"about:blank" instead.

Test: fast/url/data-uri-based-urls.html

  • platform/URL.cpp:

(WebCore::URL::init):

LayoutTests:

  • TestExpectations:
  • fast/url/data-uri-based-urls-expected.txt: Added.
  • fast/url/data-uri-based-urls.html: Added.
  • fast/url/relative-expected.txt:
3:35 PM Changeset in webkit [199198] by adachan@apple.com
  • 2 edits in trunk/LayoutTests

Skip a couple more tests that are asserting in FrameView::scheduleRelayoutOfSubtree().

Unreviewed test gardening.

  • platform/mac/TestExpectations:
3:34 PM Changeset in webkit [199197] by Brian Burg
  • 10 edits in trunk/Source

Web Automation: implement Automation.addSingleCookie
https://bugs.webkit.org/show_bug.cgi?id=156319
<rdar://problem/25589605>

Reviewed by Timothy Hatcher.

Source/WebCore:

  • platform/Cookie.h: Document the units used by the 'expires' field.

Source/WebKit2:

Implement this command by converting the protocol cookie to
WebCore::Cookie, then sending the cookie to NetworkProcess to
be added to the storage session using CookieJar::addCookie.

  • UIProcess/Automation/Automation.json:

Clarify the units used in the 'expires' field and how the default value
for the domain field should be computed.

  • UIProcess/Automation/WebAutomationSession.cpp:

(WebKit::WebAutomationSession::addSingleCookie):
Parse the cookie and send it out via WebCookieManagerProxy.

  • UIProcess/WebCookieManagerProxy.cpp:

(WebKit::WebCookieManagerProxy::addCookie): Added.

  • UIProcess/WebCookieManagerProxy.h:
  • WebProcess/Cookies/WebCookieManager.cpp:

(WebKit::WebCookieManager::addCookie):

  • WebProcess/Cookies/WebCookieManager.h:
  • WebProcess/Cookies/WebCookieManager.messages.in:

Forward the message to WebCore::addCookie.

3:31 PM Changeset in webkit [199196] by Jon Davis
  • 2 edits in trunk/Source/WebCore

Add ImageBitmap as under consideration on Feature Status page
https://bugs.webkit.org/show_bug.cgi?id=156362

Reviewed by Timothy Hatcher.

  • features.json:
3:31 PM Changeset in webkit [199195] by Jon Davis
  • 2 edits in trunk/Source/WebCore

Include Conical Gradients on the Feature Status page.
https://bugs.webkit.org/show_bug.cgi?id=156363

Reviewed by Timothy Hatcher.

  • features.json:
3:28 PM Changeset in webkit [199194] by Beth Dakin
  • 2 edits in trunk/Source/WebCore

Build fix.

  • platform/mac/WebVideoFullscreenInterfaceMac.mm:
3:26 PM Changeset in webkit [199193] by commit-queue@webkit.org
  • 3 edits in trunk/Source/WebCore

In WK1 WebVideoFullscreen interface may be accessed from WK1 main thread instead of UI thread.
https://bugs.webkit.org/show_bug.cgi?id=154252
rdar://problem/22460539

Patch by Jeremy Jones <jeremyj@apple.com> on 2016-04-07
Reviewed by Eric Carlson.

In WebKit1, Javascript can cause enter fullscreen to happen on the main thead, which is not
necessarily the UI thread. This can cause autolayout errors. Move this code to the UI thread.

  • platform/ios/WebVideoFullscreenControllerAVKit.mm:

(WebVideoFullscreenControllerContext::setUpFullscreen): Move setup to the UI thread.

  • platform/ios/WebVideoFullscreenInterfaceAVKit.mm:

(-[WebAVPlayerLayer layoutSublayers]): Move call to resolveBounds to the UI thread.

3:25 PM Changeset in webkit [199192] by jiewen_tan@apple.com
  • 2 edits in trunk/LayoutTests

Mark http/tests/cache/disk-cache/disk-cache-validation-back-navigation-policy.html as timeout in ios-simulator-wk2
https://bugs.webkit.org/show_bug.cgi?id=149087

Unreviewed, test gardening.

  • platform/ios-simulator-wk2/TestExpectations:
3:10 PM Changeset in webkit [199191] by rniwa@webkit.org
  • 7 edits
    5 moves in trunk/Websites/perf.webkit.org

Migrate legacy perf dashboard tests to mocha.js based tests
https://bugs.webkit.org/show_bug.cgi?id=156335

Reviewed by Chris Dumez.

Migrated all legacy run-tests.js tests to mocha.js based tests. Since the new harness uses Promise
for most of asynchronous operations, refactored the tests to use Promises as well, and added more
assertions where appropriate.

Also consolidated common helper functions into server-tests/resources/common-operations.js.
Unfortunately there were multiple inconsistent implementations of addBuilder/addSlave. Some were
taking an array of reports while others were taking a single report. New shared implementation in
common-operations.js now takes a single report.

Also decreased the timeout in most tests from 10s to 1s so that tests fail early when they timeout.
Most of tests are passing under 100ms on my computer so 1s should be plenty still.

  • run-tests.js: Removed.
  • server-tests/admin-platforms-tests.js: Moved from tests/admin-platforms.js.

(reportsForDifferentPlatforms):

  • server-tests/admin-reprocess-report-tests.js: Moved from tests/admin-reprocess-report.js.

(.addBuilder): Moved to common-operations.js.

  • server-tests/api-build-requests-tests.js:
  • server-tests/api-manifest.js: Use MockData.resetV3Models() instead of manually clearing maps.
  • server-tests/api-measurement-set-tests.js: Moved from tests/api-measurement-set.js.

(.queryPlatformAndMetric):
(.format):

  • server-tests/api-report-commits-tests.js: Moved from tests/api-report-commits.js.
  • server-tests/api-report-tests.js: Moved from tests/api-report.js.

(.emptyReport):
(.emptySlaveReport):
(.reportWithSameSubtestName):

  • server-tests/resources/common-operations.js: Added.

(addBuilderForReport): Extracted from tests.
(addSlaveForReport): Ditto.
(connectToDatabaseInEveryTest): Added.
(submitReport): Extracted from admin-platforms-tests.js.

  • server-tests/resources/test-server.js:

(TestServer): Make TestServer a singleton since it doesn't make any sense for each module to start
its own Apache instance (that would certainly will fail).

  • server-tests/tools-buildbot-triggerable-tests.js:
  • tests: Removed.
  • tools/js/database.js:

(Database.prototype.selectAll): Added.
(Database.prototype.selectFirstRow): Added.
(Database.prototype.selectRows): Added. Dynamically construct a query string based on arguments.

3:02 PM Changeset in webkit [199190] by Beth Dakin
  • 2 edits in trunk/Source/WebCore

Build fix.

  • platform/mac/WebVideoFullscreenInterfaceMac.mm:
3:01 PM Changeset in webkit [199189] by Jon Davis
  • 2 edits in trunk/Source/JavaScriptCore

Add Web Animations API to Feature Status Page
https://bugs.webkit.org/show_bug.cgi?id=156360

Reviewed by Timothy Hatcher.

  • features.json:
2:56 PM Changeset in webkit [199188] by Chris Dumez
  • 8 edits in trunk/Source/WebCore

[WebIDL] Add support for [EnabledAtRuntime] attributes on non-global objects
https://bugs.webkit.org/show_bug.cgi?id=156346

Reviewed by Ryosuke Niwa.

Add support for [EnabledAtRuntime] attributes on non-global objects by
using the same approach as for [EnabledAtRuntime] operations. This means
we add these attributes to the static property table but they get removed
at runtime in JS*Prototype::finishCreation(), if the feature is disabled,
after the eager reification of the prototype.

  • bindings/scripts/CodeGeneratorJS.pm:

(GeneratePropertiesHashTable):
(GenerateImplementation):

  • bindings/scripts/test/GObject/WebKitDOMTestObj.cpp:

(webkit_dom_test_obj_set_property):
(webkit_dom_test_obj_get_property):
(webkit_dom_test_obj_class_init):
(webkit_dom_test_obj_enabled_at_runtime_operation):
(webkit_dom_test_obj_get_enabled_at_runtime_attribute):
(webkit_dom_test_obj_set_enabled_at_runtime_attribute):

  • bindings/scripts/test/GObject/WebKitDOMTestObj.h:
  • bindings/scripts/test/JS/JSTestObj.cpp:

(WebCore::JSTestObjPrototype::finishCreation):
(WebCore::jsTestObjEnabledAtRuntimeAttribute):
(WebCore::setJSTestObjEnabledAtRuntimeAttribute):
(WebCore::jsTestObjPrototypeFunctionEnabledAtRuntimeOperation1):
(WebCore::jsTestObjPrototypeFunctionEnabledAtRuntimeOperation2):
(WebCore::jsTestObjPrototypeFunctionEnabledAtRuntimeOperation):

  • bindings/scripts/test/ObjC/DOMTestObj.h:
  • bindings/scripts/test/ObjC/DOMTestObj.mm:

(-[DOMTestObj enabledAtRuntimeAttribute]):
(-[DOMTestObj setEnabledAtRuntimeAttribute:]):
(-[DOMTestObj enabledAtRuntimeOperation:]):

  • bindings/scripts/test/TestObj.idl:
2:55 PM Changeset in webkit [199187] by Beth Dakin
  • 2 edits in trunk/Source/WebCore

Attempted build fix.

  • platform/mac/WebVideoFullscreenInterfaceMac.mm:

(-[WebPlaybackControlsManager seekToTime:toleranceBefore:toleranceAfter:]):
(-[WebPlaybackControlsManager setCurrentAudioMediaSelectionOption:]):
(-[WebPlaybackControlsManager setCurrentLegibleMediaSelectionOption:]):
(-[WebPlaybackControlsManager currentAudioMediaSelectionOption]): Deleted.
(-[WebPlaybackControlsManager currentLegibleMediaSelectionOption]): Deleted.

2:51 PM Changeset in webkit [199186] by adachan@apple.com
  • 2 edits in trunk/Source/WebCore

Add WebKitAdditions extension point in HTMLVideoElement::supportsFullscreen()
https://bugs.webkit.org/show_bug.cgi?id=156366

Reviewed by Alex Christensen.

  • html/HTMLVideoElement.cpp:

(WebCore::HTMLVideoElement::supportsFullscreen):

2:39 PM Changeset in webkit [199185] by Jon Davis
  • 2 edits in trunk/Source/WebCore

Add WOFF2 to the Feature Status page
https://bugs.webkit.org/show_bug.cgi?id=156361

Reviewed by Timothy Hatcher.

  • features.json:
2:31 PM Changeset in webkit [199184] by Beth Dakin
  • 3 edits in trunk/Source/WebCore

WebPlaybackControlsManager should support mediaSelectionOptions
https://bugs.webkit.org/show_bug.cgi?id=156358
-and corresponding-
rdar://problem/25048743

Reviewed by Jer Noble.

This patch just implements
WebVideoFullscreenInterfaceMac::setAudioMediaSelectionOptions and
WebVideoFullscreenInterfaceMac::setLegibleMediaSelectionOptions and passes that
information on to WebPlaybackControlsManager. If selection options are set via
the WebPlaybackControlsManager, then it gets the webVideoFullscreenModel() to
set the new value.

  • platform/mac/WebVideoFullscreenInterfaceMac.h:
  • platform/mac/WebVideoFullscreenInterfaceMac.mm:

(-[WebPlaybackControlsManager currentAudioMediaSelectionOption]):
(-[WebPlaybackControlsManager setCurrentAudioMediaSelectionOption:]):
(-[WebPlaybackControlsManager currentLegibleMediaSelectionOption]):
(-[WebPlaybackControlsManager setCurrentLegibleMediaSelectionOption:]):
(WebCore::mediaSelectionOptions):
(WebCore::WebVideoFullscreenInterfaceMac::setAudioMediaSelectionOptions):
(WebCore::WebVideoFullscreenInterfaceMac::setLegibleMediaSelectionOptions):
(-[WebPlaybackControlsManager audioMediaSelectionOptions]): Deleted.
(-[WebPlaybackControlsManager legibleMediaSelectionOptions]): Deleted.

2:26 PM Changeset in webkit [199183] by ap@apple.com
  • 4 edits in trunk/LayoutTests

Test expectation gardening for
Assertion failure in MessagePort::contextDestroyed in http/tests/security/MessagePort/event-listener-context.html,
usually attributed to later tests
https://bugs.webkit.org/show_bug.cgi?id=94458

http/tests/security/MessagePort/event-listener-context.html is the only culprit,
so it should be skipped everywhere, and subsequent tests shouldn't be marked.

  • TestExpectations:
  • platform/ios-simulator/TestExpectations:
  • platform/mac/TestExpectations:
2:25 PM Changeset in webkit [199182] by sbarati@apple.com
  • 2 edits in trunk/Source/JavaScriptCore

Invalid assertion inside DebuggerScope::getOwnPropertySlot
https://bugs.webkit.org/show_bug.cgi?id=156357

Reviewed by Keith Miller.

The Type Profiler might profile JS code that uses DebuggerScope and accesses properties
on it. Therefore, it may have a DebuggerScope object in its log. Objects in the log
are subject to having their getOwnPropertySlot method called. Therefore, the DebuggerScope
might not always be in a valid state when its getOwnPropertySlot method is called.
Therefore, the assertion invalid.

  • debugger/DebuggerScope.cpp:

(JSC::DebuggerScope::getOwnPropertySlot):

2:15 PM Changeset in webkit [199181] by Brent Fulgham
  • 11 edits
    2 adds in trunk

Wheel event callback removing the window causes crash in WebCore.
https://bugs.webkit.org/show_bug.cgi?id=150871
<rdar://problem/23418283>

Reviewed by Simon Fraser.

Source/WebCore:

Null check the FrameView before using it, since the iframe may have been removed
from its parent document inside the event handler.

The new test triggered a cross-load side-effect, where wheel event filtering wasn't
reset between page loads. Fix by calling clearLatchedState() in EventHandler::clear(),
which resets the filtering.

Since the Frame destructor invokes EventHandler::clear, which invokes MainFrame methods,
we run the risk of attempting to dereference destroyed MainFrame elements of the current
Frame object. Instead, clear the EventHandler in the MainFrame destructor.

Finally, confirm that the mainFrame member is not being destroyed in the handful of
places that might attempt to access the mainFrame during object destruction (essentially
cleanup methods).

Test: fast/events/wheel-event-destroys-frame.html

  • loader/FrameLoader.cpp:

(WebCore::FrameLoader::clear): Protect against accessing mainFrame content during destruction.

  • page/EventHandler.cpp:

(WebCore::EventHandler::clear): Call 'clearLatchedState' instead of endFilteringDeltas.
(WebCore::EventHandler::clearLatchedState): Null-check the filter before calling it.

  • page/Frame.cpp:

(WebCore::Frame::~Frame): Do not call 'setView' in the destructor for a MainFrame.
(WebCore::Frame::setView): Check for a null event handler before invoking it.
(WebCore::Frame::setMainFrameWasDestroyed): Added. Mark that the MainFrame
member of the Frame is being destroyed (if the current Frame is a MainFrame) and clear
the EventHandler member so that it doesn't attempt to access mainFrame content.
(WebCore::Frame::mainFrame): When accessing the mainFrame member, assert that the
mainFrame is not being destroyed.

  • page/MainFrame.cpp:

(WebCore::MainFrame::~MainFrame): Set the m_recentWheelEventDeltaFilter to nullptr to
prevent attempts to access it during object destruction. Call the new 'setMainFrameWasDestroyed'
method to reset eventHandler and mark the MainFrame as being in the process of destruction.

  • page/WheelEventDeltaFilter.cpp:

(WebCore::WheelEventDeltaFilter::filteredDelta): Add logging.

  • page/mac/EventHandlerMac.mm:

(WebCore::EventHandler::platformCompleteWheelEvent): Add null check.

  • rendering/RenderLayer.cpp:

(WebCore::RenderLayer::scrollTo): Add logging.

LayoutTests:

  • fast/events/wheel-event-destroys-frame-expected.txt: Added.
  • fast/events/wheel-event-destroys-frame.html: Added.
  • platform/ios-simulator/TestExpectations: Skip wheel-event test on iOS.
2:08 PM Changeset in webkit [199180] by jmarcell@apple.com
  • 2 edits
    6 moves
    3 adds in trunk/Tools

Adding layout tests for the bot watcher's dashboard QUnit tests. https://bugs.webkit.org/show_bug.cgi?id=155272

Reviewed by Daniel Bates.

Moved supporting resources into a resources folder and updated index.html accordingly
to point to the new locations. Added code to tests.js to dumpAsText when QUnit is done.

  • BuildSlaveSupport/build.webkit.org-config/public_html/dashboard/Scripts/tests/index-expected.txt: Added.
  • BuildSlaveSupport/build.webkit.org-config/public_html/dashboard/Scripts/tests/index.html: Updated to point to tests.js and Mock files in resources directory.
  • BuildSlaveSupport/build.webkit.org-config/public_html/dashboard/Scripts/tests/resources/MockBuildbotQueue.js: Renamed from

Tools/BuildSlaveSupport/build.webkit.org-config/public_html/dashboard/Scripts/tests/MockBuildbotQueue.js.
(MockBuildbotQueue):

  • BuildSlaveSupport/build.webkit.org-config/public_html/dashboard/Scripts/tests/resources/MockBuildbotQueueView.js: Renamed from

Tools/BuildSlaveSupport/build.webkit.org-config/public_html/dashboard/Scripts/tests/MockBuildbotQueueView.js.
(MockBuildbotQueueView):
(MockBuildbotQueueView.prototype._latestProductiveIteration):

  • BuildSlaveSupport/build.webkit.org-config/public_html/dashboard/Scripts/tests/resources/MockTrac.js: Renamed from

Tools/BuildSlaveSupport/build.webkit.org-config/public_html/dashboard/Scripts/tests/MockTrac.js.
(MockTrac):
(MockTrac.prototype.get oldestRecordedRevisionNumber):
(MockTrac.prototype.get latestRecordedRevisionNumber):
(MockTrac.prototype.loadMoreHistoricalData):

  • BuildSlaveSupport/build.webkit.org-config/public_html/dashboard/Scripts/tests/resources/test-fixture-git-trac-rss.xml: Renamed from

Tools/BuildSlaveSupport/build.webkit.org-config/public_html/dashboard/Scripts/tests/test-fixture-git-trac-rss.xml.

  • BuildSlaveSupport/build.webkit.org-config/public_html/dashboard/Scripts/tests/resources/test-fixture-trac-rss.xml: Renamed from

Tools/BuildSlaveSupport/build.webkit.org-config/public_html/dashboard/Scripts/tests/test-fixture-trac-rss.xml.

  • BuildSlaveSupport/build.webkit.org-config/public_html/dashboard/Scripts/tests/resources/tests.js: Renamed from

Tools/BuildSlaveSupport/build.webkit.org-config/public_html/dashboard/Scripts/tests/tests.js.
Updated the unit tests for Trac._loaded() to point to the XML files that are now located in the 'resources' directory.
(QUnit.done): Added. Removes machine-specific output from test results and calls testRunner.notifyDone to let the layout test harness know that all testing is done.

  • Scripts/run-dashboard-tests: Added.
2:01 PM Changeset in webkit [199179] by sbarati@apple.com
  • 8 edits in trunk

Initial implementation of annex b.3.3 behavior was incorrect
https://bugs.webkit.org/show_bug.cgi?id=156276

Reviewed by Keith Miller.

Source/JavaScriptCore:

I almost got annex B.3.3 correct in my first implementation.
There is a subtlety here I got wrong. We always create a local binding for
a function at the very beginning of execution of a block scope. So we
hoist function declarations to their local binding within a given
block scope. When we actually evaluate the function declaration statement
itself, we must lookup the binding in the current scope, and bind the
value to the binding in the "var" scope. We perform the following
abstract operations when executing a function declaration statement.

f = lookupBindingInCurrentScope("func")
store(varScope, "func", f)

I got this wrong by performing the store to the var binding at the beginning
of the block scope instead of when we evaluate the function declaration statement.
This behavior is observable. For example, a program could change the value
of "func" before the actual function declaration statement executes.
Consider the following two functions:
`
function foo1() {

func === undefined
{

typeof func === "function"
function func() { }
Executing this statement binds the local "func" binding to the implicit "func" var binding.
func = 20 This sets the local "func" binding to 20.

}
typeof func === "function"

}

function foo2() {

func === undefined
{

typeof func === "function"
func = 20
This sets the local "func" binding to 20.
function func() { } Executing this statement binds the local "func" binding to the implicit "func" var binding.

}
func === 20

}
`

  • bytecompiler/BytecodeGenerator.cpp:

(JSC::BytecodeGenerator::initializeBlockScopedFunctions):
(JSC::BytecodeGenerator::hoistSloppyModeFunctionIfNecessary):

  • bytecompiler/BytecodeGenerator.h:

(JSC::BytecodeGenerator::emitNodeForLeftHandSide):

  • bytecompiler/NodesCodegen.cpp:

(JSC::FuncDeclNode::emitBytecode):

  • tests/stress/sloppy-mode-function-hoisting.js:

(test.foo):
(test):
(test.):
(test.bar):
(test.switch.case.0):
(test.capFoo1):
(test.switch.capFoo2):
(test.outer):
(foo):

LayoutTests:

  • js/function-declarations-in-switch-statement-expected.txt:
  • js/script-tests/function-declarations-in-switch-statement.js:
2:00 PM Changeset in webkit [199178] by commit-queue@webkit.org
  • 2 edits in trunk/Source/WebInspectorUI

Web Inspector: Uncaught Exception: No resource with given URL found
https://bugs.webkit.org/show_bug.cgi?id=156259
<rdar://problem/25564749>

Patch by Joseph Pecoraro <Joseph Pecoraro> on 2016-04-07
Reviewed by Timothy Hatcher.

  • UserInterface/Views/SourceCodeTextEditor.js:

(WebInspector.SourceCodeTextEditor):
SourceCode.prototype.requestContent will reject if it cannot load
content for the given resource. In that case, we already have an
earlier catch handler that displays an error message in the
ContentView, so we shouldn't show an Uncaught Exception page.
Really, we should not reject the original promise here, and
instead resolve it with an object describing the error, but
short term we should remove the uncaught exception handler for
this case.

1:59 PM Changeset in webkit [199177] by commit-queue@webkit.org
  • 2 edits
    1 add in trunk/Source/WebInspectorUI

Web Inspector: Take snapshot navigation button should match navigation button styles
https://bugs.webkit.org/show_bug.cgi?id=156355
<rdar://problem/25325172>

Patch by Joseph Pecoraro <Joseph Pecoraro> on 2016-04-07
Reviewed by Timothy Hatcher.

  • UserInterface/Images/Camera.svg: Added.
  • UserInterface/Views/HeapAllocationsTimelineView.js:

(WebInspector.HeapAllocationsTimelineView):
Use the new image for the navigation bar button.

1:38 PM Changeset in webkit [199176] by achristensen@apple.com
  • 2 edits in trunk/Source/JavaScriptCore

Build fix after r199170

  • CMakeLists.txt:
1:21 PM Changeset in webkit [199175] by adachan@apple.com
  • 3 edits in trunk/Source/WebKit2

Add WebKitAdditions extension points around preferences
https://bugs.webkit.org/show_bug.cgi?id=156303

Reviewed by Beth Dakin.

  • Shared/WebPreferencesStore.cpp:

(WebKit::defaults):

  • UIProcess/API/C/WKPreferences.cpp:
1:04 PM Changeset in webkit [199174] by adachan@apple.com
  • 8 edits
    2 moves in trunk

Rename TextTrackRepresentationiOS to TextTrackRepresentationCocoa and enable on Mac
https://bugs.webkit.org/show_bug.cgi?id=156245

Reviewed by Eric Carlson.

Source/WebCore:

  • Modules/mediacontrols/mediaControlsApple.css:

(::-webkit-media-controls):
Match iOS and specify overflow: hidden on the -webkit-media-controls container.
(video::-webkit-media-text-track-container):
Match iOS and specify z-index: 0 on the text track container.

  • WebCore.xcodeproj/project.pbxproj:

TextTrackRepresentationiOS.h/mm have been renamed to TextTrackRepresentationCocoa.h/mm.

  • platform/graphics/TextTrackRepresentation.cpp:
  • platform/graphics/cocoa/TextTrackRepresentationCocoa.h: Renamed from Source/WebCore/platform/graphics/ios/TextTrackRepresentationIOS.h.
  • platform/graphics/cocoa/TextTrackRepresentationCocoa.mm: Renamed from Source/WebCore/platform/graphics/ios/TextTrackRepresentationIOS.mm.

(-[WebCoreTextTrackRepresentationCocoaHelper initWithParent:]):
(-[WebCoreTextTrackRepresentationCocoaHelper dealloc]):
(-[WebCoreTextTrackRepresentationCocoaHelper setParent:]):
(-[WebCoreTextTrackRepresentationCocoaHelper parent]):
(-[WebCoreTextTrackRepresentationCocoaHelper observeValueForKeyPath:ofObject:change:context:]):
(-[WebCoreTextTrackRepresentationCocoaHelper actionForLayer:forKey:]):
(TextTrackRepresentation::create):
(TextTrackRepresentationCocoa::TextTrackRepresentationCocoa):
(TextTrackRepresentationCocoa::~TextTrackRepresentationCocoa):
(TextTrackRepresentationCocoa::update):
(TextTrackRepresentationCocoa::setContentScale):
(TextTrackRepresentationCocoa::bounds):

LayoutTests:

  • platform/mac/TestExpectations:

Skip some tests with assertions after changes in MediaControlsApple.css.

  • platform/mac/media/media-document-audio-repaint-expected.txt:
  • platform/mac/media/video-zoom-controls-expected.txt:

Rebaseline some tests after changes in MediaControlsApple.css.

12:57 PM Changeset in webkit [199173] by Jon Davis
  • 2 edits in trunk/Websites/webkit.org

Improved drop down menu with translate; cleaned up unnecessary whitespace.
https://bugs.webkit.org/show_bug.cgi?id=156342

Reviewed by Timothy Hatcher.

  • wp-content/themes/webkit/style.css:

(p > a[name]::before):
(.has-post-thumbnail .background-image):
(.table-of-contents):
(header .menu-item-has-children .label-toggle::after):
(.sub-menu-layer):
(.sub-menu-layer:after, .sub-menu-layer:before):
(.sub-menu-layer .menu-item):
(.menu > .menu-item > .menu-toggle:checked + .sub-menu):
(@media only screen and (max-width: 920px)):
(header .sub-menu-layer):
(@media only screen and (max-width: 415px)):
(@media only screen and (max-width: 1180px)): Deleted.
(@media only screen and (max-width: 1000px)): Deleted.
(@media only screen and (max-width: 690px)): Deleted.
(@media only screen and (max-width: 600px)): Deleted.
(@media only screen and (max-height: 415px)): Deleted.
(@media only screen and (max-width: 320px)): Deleted.

12:52 PM Changeset in webkit [199172] by dbates@webkit.org
  • 1 edit
    51 deletes in trunk/LayoutTests

CSP: Remove tests for unimplemented directive referrer
https://bugs.webkit.org/show_bug.cgi?id=156353

Reviewed by Andy Estes.

The Content Security Policy directive referrer was removed from the Content Security Policy Level 2 spec.,
<https://w3c.github.io/webappsec-csp/2/> (Editor's Draft, 29 August 2015). It was never implemented.
The functionality provided by this directive has been incorporated into its own meta tag and is covered
by the Referrer Policy spec., <https://w3c.github.io/webappsec-referrer-policy/>.

  • http/tests/security/contentSecurityPolicy/1.1/referrer-always-http-http-expected.txt: Removed.
  • http/tests/security/contentSecurityPolicy/1.1/referrer-always-http-http.html: Removed.
  • http/tests/security/contentSecurityPolicy/1.1/referrer-always-http-https-expected.txt: Removed.
  • http/tests/security/contentSecurityPolicy/1.1/referrer-always-http-https.html: Removed.
  • http/tests/security/contentSecurityPolicy/1.1/referrer-always-https-http-expected.txt: Removed.
  • http/tests/security/contentSecurityPolicy/1.1/referrer-always-https-http.html: Removed.
  • http/tests/security/contentSecurityPolicy/1.1/referrer-always-https-https-expected.txt: Removed.
  • http/tests/security/contentSecurityPolicy/1.1/referrer-always-https-https.html: Removed.
  • http/tests/security/contentSecurityPolicy/1.1/referrer-default-http-http-expected.txt: Removed.
  • http/tests/security/contentSecurityPolicy/1.1/referrer-default-http-http.html: Removed.
  • http/tests/security/contentSecurityPolicy/1.1/referrer-default-http-https-expected.txt: Removed.
  • http/tests/security/contentSecurityPolicy/1.1/referrer-default-http-https.html: Removed.
  • http/tests/security/contentSecurityPolicy/1.1/referrer-default-https-http-expected.txt: Removed.
  • http/tests/security/contentSecurityPolicy/1.1/referrer-default-https-http.html: Removed.
  • http/tests/security/contentSecurityPolicy/1.1/referrer-default-https-https-expected.txt: Removed.
  • http/tests/security/contentSecurityPolicy/1.1/referrer-default-https-https.html: Removed.
  • http/tests/security/contentSecurityPolicy/1.1/referrer-empty-http-http-expected.txt: Removed.
  • http/tests/security/contentSecurityPolicy/1.1/referrer-empty-http-http.html: Removed.
  • http/tests/security/contentSecurityPolicy/1.1/referrer-empty-http-https-expected.txt: Removed.
  • http/tests/security/contentSecurityPolicy/1.1/referrer-empty-http-https.html: Removed.
  • http/tests/security/contentSecurityPolicy/1.1/referrer-empty-https-http-expected.txt: Removed.
  • http/tests/security/contentSecurityPolicy/1.1/referrer-empty-https-http.html: Removed.
  • http/tests/security/contentSecurityPolicy/1.1/referrer-empty-https-https-expected.txt: Removed.
  • http/tests/security/contentSecurityPolicy/1.1/referrer-empty-https-https.html: Removed.
  • http/tests/security/contentSecurityPolicy/1.1/referrer-invalid-http-http-expected.txt: Removed.
  • http/tests/security/contentSecurityPolicy/1.1/referrer-invalid-http-http.html: Removed.
  • http/tests/security/contentSecurityPolicy/1.1/referrer-invalid-http-https-expected.txt: Removed.
  • http/tests/security/contentSecurityPolicy/1.1/referrer-invalid-http-https.html: Removed.
  • http/tests/security/contentSecurityPolicy/1.1/referrer-invalid-https-http-expected.txt: Removed.
  • http/tests/security/contentSecurityPolicy/1.1/referrer-invalid-https-http.html: Removed.
  • http/tests/security/contentSecurityPolicy/1.1/referrer-invalid-https-https-expected.txt: Removed.
  • http/tests/security/contentSecurityPolicy/1.1/referrer-invalid-https-https.html: Removed.
  • http/tests/security/contentSecurityPolicy/1.1/referrer-never-http-http-expected.txt: Removed.
  • http/tests/security/contentSecurityPolicy/1.1/referrer-never-http-http.html: Removed.
  • http/tests/security/contentSecurityPolicy/1.1/referrer-never-http-https-expected.txt: Removed.
  • http/tests/security/contentSecurityPolicy/1.1/referrer-never-http-https.html: Removed.
  • http/tests/security/contentSecurityPolicy/1.1/referrer-never-https-http-expected.txt: Removed.
  • http/tests/security/contentSecurityPolicy/1.1/referrer-never-https-http.html: Removed.
  • http/tests/security/contentSecurityPolicy/1.1/referrer-never-https-https-expected.txt: Removed.
  • http/tests/security/contentSecurityPolicy/1.1/referrer-never-https-https.html: Removed.
  • http/tests/security/contentSecurityPolicy/1.1/referrer-origin-http-http-expected.txt: Removed.
  • http/tests/security/contentSecurityPolicy/1.1/referrer-origin-http-http.html: Removed.
  • http/tests/security/contentSecurityPolicy/1.1/referrer-origin-http-https-expected.txt: Removed.
  • http/tests/security/contentSecurityPolicy/1.1/referrer-origin-http-https.html: Removed.
  • http/tests/security/contentSecurityPolicy/1.1/referrer-origin-https-http-expected.txt: Removed.
  • http/tests/security/contentSecurityPolicy/1.1/referrer-origin-https-http.html: Removed.
  • http/tests/security/contentSecurityPolicy/1.1/referrer-origin-https-https-expected.txt: Removed.
  • http/tests/security/contentSecurityPolicy/1.1/referrer-origin-https-https.html: Removed.
  • http/tests/security/contentSecurityPolicy/resources/referrer-test-endpoint.php: Removed.
  • http/tests/security/contentSecurityPolicy/resources/referrer-test.js: Removed.
  • http/tests/security/contentSecurityPolicy/resources/referrer-test.php: Removed.
12:47 PM Changeset in webkit [199171] by Joseph Pecoraro
  • 2 edits in trunk/LayoutTests

Unreviewed follow-up fix to r199168. Add missing newline in expected output.

  • inspector/codemirror/resources/prettyprinting/javascript-tests/single-statement-blocks-expected.js:
12:38 PM Changeset in webkit [199170] by keith_miller@apple.com
  • 40 edits
    2 copies
    1 add in trunk/Source/JavaScriptCore

We should support the ability to do a non-effectful getById
https://bugs.webkit.org/show_bug.cgi?id=156116

Reviewed by Benjamin Poulain.

Currently, there is no way in JS to do a non-effectful getById. A non-effectful getById is
useful because it enables us to take different code paths based on values that we would
otherwise not be able to have knowledge of. This patch adds this new feature called
try_get_by_id that will attempt to do as much of a get_by_id as possible without performing
an effectful behavior. Thus, try_get_by_id will return the value if the slot is a value, the
GetterSetter object if the slot is a normal accessor (not a CustomGetterSetter) and
undefined if the slot is unset. If the slot is proxied or any other cases then the result
is null. In theory, if we ever wanted to check for null we could add a sentinal object to
the global object that indicates we could not get the result.

In order to implement this feature we add a new enum GetByIdKind that indicates what to do
for accessor properties in PolymorphicAccess. If the GetByIdKind is pure then we treat the
get_by_id the same way we would for load and return the value at the appropriate offset.
Additionally, in order to make sure the we can properly compare the GetterSetter object
with === GetterSetters are now JSObjects. This comes at the cost of eight extra bytes on the
GetterSetter object but it vastly simplifies the patch. Additionally, the extra bytes are
likely to have little to no impact on memory usage as normal accessors are generally rare.

  • JavaScriptCore.xcodeproj/project.pbxproj:
  • builtins/BuiltinExecutableCreator.cpp: Added.

(JSC::createBuiltinExecutable):

  • builtins/BuiltinExecutableCreator.h: Copied from Source/JavaScriptCore/builtins/BuiltinExecutables.h.
  • builtins/BuiltinExecutables.cpp:

(JSC::BuiltinExecutables::createDefaultConstructor):
(JSC::BuiltinExecutables::createBuiltinExecutable):
(JSC::createBuiltinExecutable):
(JSC::BuiltinExecutables::createExecutable):
(JSC::createExecutableInternal): Deleted.

  • builtins/BuiltinExecutables.h:
  • bytecode/BytecodeIntrinsicRegistry.h:
  • bytecode/BytecodeList.json:
  • bytecode/BytecodeUseDef.h:

(JSC::computeUsesForBytecodeOffset):
(JSC::computeDefsForBytecodeOffset):

  • bytecode/CodeBlock.cpp:

(JSC::CodeBlock::dumpBytecode):

  • bytecode/PolymorphicAccess.cpp:

(JSC::AccessCase::tryGet):
(JSC::AccessCase::generate):
(WTF::printInternal):

  • bytecode/PolymorphicAccess.h:

(JSC::AccessCase::isGet): Deleted.
(JSC::AccessCase::isPut): Deleted.
(JSC::AccessCase::isIn): Deleted.

  • bytecode/StructureStubInfo.cpp:

(JSC::StructureStubInfo::reset):

  • bytecode/StructureStubInfo.h:
  • bytecompiler/BytecodeGenerator.cpp:

(JSC::BytecodeGenerator::emitTryGetById):

  • bytecompiler/BytecodeGenerator.h:
  • bytecompiler/NodesCodegen.cpp:

(JSC::BytecodeIntrinsicNode::emit_intrinsic_tryGetById):

  • dfg/DFGSpeculativeJIT32_64.cpp:

(JSC::DFG::SpeculativeJIT::cachedGetById):

  • dfg/DFGSpeculativeJIT64.cpp:

(JSC::DFG::SpeculativeJIT::cachedGetById):

  • ftl/FTLLowerDFGToB3.cpp:

(JSC::FTL::DFG::LowerDFGToB3::getById):

  • jit/JIT.cpp:

(JSC::JIT::privateCompileMainPass):
(JSC::JIT::privateCompileSlowCases):

  • jit/JIT.h:
  • jit/JITInlineCacheGenerator.cpp:

(JSC::JITGetByIdGenerator::JITGetByIdGenerator):

  • jit/JITInlineCacheGenerator.h:
  • jit/JITInlines.h:

(JSC::JIT::callOperation):

  • jit/JITOperations.cpp:
  • jit/JITOperations.h:
  • jit/JITPropertyAccess.cpp:

(JSC::JIT::emitGetByValWithCachedId):
(JSC::JIT::emit_op_try_get_by_id):
(JSC::JIT::emitSlow_op_try_get_by_id):
(JSC::JIT::emit_op_get_by_id):

  • jit/JITPropertyAccess32_64.cpp:

(JSC::JIT::emitGetByValWithCachedId):
(JSC::JIT::emit_op_try_get_by_id):
(JSC::JIT::emitSlow_op_try_get_by_id):
(JSC::JIT::emit_op_get_by_id):

  • jit/Repatch.cpp:

(JSC::repatchByIdSelfAccess):
(JSC::appropriateOptimizingGetByIdFunction):
(JSC::appropriateGenericGetByIdFunction):
(JSC::tryCacheGetByID):
(JSC::repatchGetByID):
(JSC::resetGetByID):

  • jit/Repatch.h:
  • jsc.cpp:

(GlobalObject::finishCreation):
(functionGetGetterSetter):
(functionCreateBuiltin):

  • llint/LLIntData.cpp:

(JSC::LLInt::Data::performAssertions):

  • llint/LLIntSlowPaths.cpp:

(JSC::LLInt::LLINT_SLOW_PATH_DECL):

  • llint/LLIntSlowPaths.h:
  • llint/LowLevelInterpreter.asm:
  • runtime/GetterSetter.cpp:
  • runtime/GetterSetter.h:
  • runtime/JSType.h:
  • runtime/PropertySlot.cpp:

(JSC::PropertySlot::getPureResult):

  • runtime/PropertySlot.h:
  • runtime/ProxyObject.cpp:

(JSC::ProxyObject::getOwnPropertySlotCommon):

  • tests/stress/try-get-by-id.js: Added.

(tryGetByIdText):
(getCaller.obj.1.throw.new.Error.let.func):
(getCaller.obj.1.throw.new.Error):
(throw.new.Error.get let):
(throw.new.Error.):
(throw.new.Error.let.get createBuiltin):
(get let):
(let.get createBuiltin):
(let.func):
(get let.func):
(get throw):

12:29 PM Changeset in webkit [199169] by Joseph Pecoraro
  • 8 edits in trunk/Source/WebInspectorUI

Web Inspector: Inspector hangs when trying to view a large XHR resource
https://bugs.webkit.org/show_bug.cgi?id=144107
<rdar://problem/20669463>

Reviewed by NOBODY (OOPS!).

Previously auto formatting (initially pretty print source code) in TextEditor
was done synchronously in this order:

(1) revealing the Editor as soon as we have content
(2) set the CodeMirror value
(3) pretty print with the CodeMirror editor
(4) set the CodeMirror value

=> Layout

At the end, CodeMirror would layout once with the new content. This approach
performs very poorly when step (3) is an asynchronous action, because it would
mean CodeMirror would layout for both (2) and at the end (4) and the layout
itself can be very costly if the content is minified and so has very long
lines at the top of the file that need to be syntax highlighted and visible
since we do not wrap.

This patch changes the order of operations to benefit asynchronous formatting.
When SourceCodeTextEditor determines that it can autoformat it:

(1) set the CodeMirror value
(2) pretty print to source text
(3) reveal the Editor when pretty printing is done
(4) set the CodeMirror value

=> Layout

This maintains the fact that to undo pretty printing we can just "undo" the
editor to get the original text. This also means we only do a single
CodeMirror layout, with the pretty printed and therefore more manageable
source text for highlighting. It also means we continue to show a loading
indicator in the editor while we are pretty printing. If this is truely
done asynchronously, which is the case for JavaScript with FormatterWorker,
then the loading indicator will animate smoothly.

This sequence also works with the traditional synchronous formatters,
which we still have for CSS.

  • UserInterface/Views/ContentView.js:

(WebInspector.ContentView.contentViewForRepresentedObject):

  • UserInterface/Views/NavigationSidebarPanel.js:

(WebInspector.NavigationSidebarPanel.prototype.showDefaultContentViewForTreeElement):
(WebInspector.NavigationSidebarPanel.prototype._checkElementsForPendingViewStateCookie):
BreakpointTreeElements can now be restored and reselected when its
source code is null. Avoid deleting the pending cookie data if a
ContentView was not shown for the resource. When the Breakpoint
and SourceCode get hooked up, this code will run again and work.

  • UserInterface/Views/ScriptContentView.js:

(WebInspector.ScriptContentView.prototype._togglePrettyPrint):

  • UserInterface/Views/TextResourceContentView.js:

(WebInspector.TextResourceContentView.prototype._togglePrettyPrint):

  • UserInterface/Views/TextContentView.js:

(WebInspector.TextContentView.prototype._togglePrettyPrint):
New API for toggling formatting, now that it is an async operation.

  • UserInterface/Views/SourceCodeTextEditor.js:

(WebInspector.SourceCodeTextEditor):
(WebInspector.SourceCodeTextEditor.prototype.toggleTypeAnnotations):
(WebInspector.SourceCodeTextEditor.prototype.prettyPrint):
(WebInspector.SourceCodeTextEditor.prototype._populateWithContent):
(WebInspector.SourceCodeTextEditor.prototype._proceedPopulateWithContent):
(WebInspector.SourceCodeTextEditor.prototype._prepareEditorForInitialContent):
(WebInspector.SourceCodeTextEditor.prototype._populateWithInlineScriptContent.scriptContentAvailable):
(WebInspector.SourceCodeTextEditor.prototype._populateWithInlineScriptContent):
(WebInspector.SourceCodeTextEditor.prototype._populateWithScriptContent):
(WebInspector.SourceCodeTextEditor.prototype.textEditorUpdatedFormatting):
(WebInspector.SourceCodeTextEditor.prototype._contentWillPopulate): Deleted.
Move auto formatting logic into SourceCodeTextEditor, because it
determines if content should be auto formatted, and it loads the
initial content so it can determine when to show the editor for
the first time.

When we get the initial content and determine we have to autoformat,
setup the TextEditor, but don't proceed with WillPopulate/DidPopulate
until after we have formatted text.

  • UserInterface/Views/TextEditor.js:

(WebInspector.TextEditor):
(WebInspector.TextEditor.set string.update):
(WebInspector.TextEditor.prototype.set string):
(WebInspector.TextEditor.prototype.setFormatted):
(WebInspector.TextEditor.prototype.hasFormatter):
(WebInspector.TextEditor.prototype._format):
(WebInspector.TextEditor.prototype.prettyPrint):
(WebInspector.TextEditor.prototype._canUseFormatterWorker):
(WebInspector.TextEditor.prototype._startWorkerPrettyPrint):
(WebInspector.TextEditor.prototype._startCodeMirrorPrettyPrint):
(WebInspector.TextEditor.prototype._finishPrettyPrint):
(WebInspector.TextEditor.prototype._undoFormatting):
(WebInspector.TextEditor.prototype._updateAfterFormatting):
Break up the synchronous pretty printing code into multiple steps.
One path can be asynchronous formatting via FormatterWorker, another
path may be synchronous formatting using the CodeMirror formatters.

(WebInspector.TextEditor.prototype.set formatted): Deleted.
Remove the synchronous set formatted setter. Replace with setFormatted().

(WebInspector.TextEditor.prototype.set autoFormat): Deleted.
Remove the TextEditor's autoformat. Since formatting can be async, having
the TextEditor showing and asynchronously format its initial contents is
a recipe for poor performance causing multiple layouts of different content.
Instead, autoformatting is handled by SourceCodeTextEditor, and TextEditor
can then be shown when it has the right data.

12:29 PM Changeset in webkit [199168] by Joseph Pecoraro
  • 12 edits
    1 copy
    2 moves
    64 adds in trunk

Web Inspector: Improve JavaScript pretty printing
https://bugs.webkit.org/show_bug.cgi?id=156178
<rdar://problem/25535719>

Reviewed by Timothy Hatcher.

Source/WebInspectorUI:

Add a new EsprimaFormatter which pretty prints JavaScript source text
using the Esprima AST and Tokens. Currently we use CodeMirror's
tokenizer for pretty printing. By moving to Esprima for pretty
printing we get a few advantages: (1) can be used within a Worker
as there are no dependencies on DOM objects, (2) a full featured AST
gives more context to handling individual tokens. One disadvantage
is that Esprima requires valid input, so scripts with syntax errors
will not work.

EsprimaFormatter works by:

  • Getting the Esprima AST and token stream.
  • Walk all AST nodes:
    • when entering an AST node, handle any tokens before the start of this node
    • when leaving an AST node, handle any tokens that were inside the node
  • Whenever we handle a new node or token check if we should preserve any newlines or comments that do not show up in the AST or token stream.

This allows us to handle any token based on its context. Currently the
formatter prefers to operate on tokens based on their context. So the
formatter has a case for each AST node type and handles the tokens
within that AST node. A small exception is made to special case the
handling of semicolons.

  • Scripts/copy-user-interface-resources-dryrun.rb:

Add a generic check for -h, -help, --help to print usage.

  • Tools/Formatting/EsprimaFormatterDebug.js: Added.

(EsprimaFormatterDebug):
(EsprimaFormatterDebug.prototype.get debugText):
(EsprimaFormatterDebug.prototype._pad):
(EsprimaFormatterDebug.prototype._debugHeader):
(EsprimaFormatterDebug.prototype._debugFooter):
(EsprimaFormatterDebug.prototype._debug):
(EsprimaFormatterDebug.prototype._debugComments):
(EsprimaFormatterDebug.prototype._debugAfterProgramNode):
(EsprimaFormatterDebug.prototype._before):
(EsprimaFormatterDebug.prototype._after):

  • Tools/Formatting/codemirror-additions.css: Copied from Source/WebInspectorUI/Tools/PrettyPrinting/codemirror-additions.css.
  • Tools/Formatting/index.html: Added.
  • Tools/PrettyPrinting/codemirror-additions.css:

(pre): Deleted.
(a.download): Deleted.

  • Tools/PrettyPrinting/index.html:
  • Tools/PrettyPrinting/populate/jquery.min.js: Removed.

Add a Formatter tool that is similiar to the PrettyPrinting tool but
outputs debug information for Esprima tokens. This is useful for
iterating on tests, performance measurements, and general debugging
of token stream for any input.

  • UserInterface/Controllers/FormatterSourceMap.js:

(WebInspector.FormatterSourceMap.fromSourceMapData):
(WebInspector.FormatterSourceMap.fromBuilder): Deleted.
Switch to constructing with a common data objects, instead of a Builder.

  • UserInterface/Main.html:
  • UserInterface/Test.html:

New files and moved files.

  • UserInterface/Proxies/FormatterWorkerProxy.js: Added.

(WebInspector.FormatterWorkerProxy):
(WebInspector.FormatterWorkerProxy.singleton):
(WebInspector.FormatterWorkerProxy.canFormat):
(WebInspector.FormatterWorkerProxy.prototype.formatJavaScript):
(WebInspector.FormatterWorkerProxy.prototype.performAction):
(WebInspector.FormatterWorkerProxy.prototype._postMessage):
(WebInspector.FormatterWorkerProxy.prototype._handleMessage):
Main world object which provides a static formatJavaScript action.

  • UserInterface/Views/CSSStyleDeclarationTextEditor.js:

(WebInspector.CSSStyleDeclarationTextEditor.prototype._formattedContentFromEditor):

  • UserInterface/Views/TextEditor.js:

(WebInspector.TextEditor.prototype.prettyPrint.prettyPrintAndUpdateEditor):
(WebInspector.TextEditor.prototype.prettyPrint):

  • UserInterface/Workers/Formatter/FormatterContentBuilder.js: Renamed from Source/WebInspectorUI/UserInterface/Controllers/FormatterContentBuilder.js.

(FormatterContentBuilder):
Simplify construction of a Builder. The constructor objects were always
the same and often unnecessary. Also move out of the WebInspector
namespace signifying it can be used within a Worker.

(FormatterContentBuilder.prototype.get originalContent): Deleted.
(FormatterContentBuilder.prototype.get formattedContent): Deleted.
(FormatterContentBuilder.prototype.get sourceMapData): Added.
Simplify getting all the data needed for SourceMaps.

(FormatterContentBuilder.prototype.setOriginalLineEndings):
A client may wish to pre-fill line endings instead of filling
while building.

(FormatterContentBuilder.prototype.appendNewline):
Auto-clear trailing whitespace on the previous line.

  • UserInterface/Workers/Formatter/ESTreeWalker.js: Added.

(ESTreeWalker):
(ESTreeWalker.prototype.walk):
(ESTreeWalker.prototype._walk):
(ESTreeWalker.prototype._walkArray):
(ESTreeWalker.prototype._walkChildren):
Walk AST nodes in an ESTree format. Due to the spec's incompleteness
this is essentially Esprima's ESTree.

  • UserInterface/Workers/Formatter/EsprimaFormatter.js: Added.

(EsprimaFormatter):
(EsprimaFormatter.isWhitespace):
(EsprimaFormatter.prototype.get formattedText):
(EsprimaFormatter.prototype.get sourceMapData):
(EsprimaFormatter.prototype._insertNewlinesBeforeToken):
(EsprimaFormatter.prototype._insertComment):
(EsprimaFormatter.prototype._insertSameLineTrailingComments):
(EsprimaFormatter.prototype._insertCommentsAndNewlines):
(EsprimaFormatter.prototype._before):
(EsprimaFormatter.prototype._after):
(EsprimaFormatter.prototype._isInForHeader):
(EsprimaFormatter.prototype._isRangeWhitespace):
(EsprimaFormatter.prototype._handleTokenAtNode):
(EsprimaFormatter.prototype._exitNode):
(EsprimaFormatter.prototype._afterProgram):
Pretty print source text.

  • UserInterface/Workers/Formatter/FormatterUtilities.js: Added.

(Array.prototype.lastValue):
(String.prototype.lineEndings):
(isECMAScriptWhitespace):
(isECMAScriptLineTerminator):
Helpers used by the classes in the Worker code.

  • UserInterface/Workers/Formatter/FormatterWorker.js: Added.

(FormatterWorker):
(FormatterWorker.prototype.formatJavaScript):
(FormatterWorker.prototype._handleMessage):
Handle the formatJavaScript action.

LayoutTests:

Expand the JavaScript formatting tests.

  • inspector/codemirror/resources/prettyprinting/javascript-tests/single-statement-blocks-expected.js:

Update output now that the builder removes extra trailing whitespace automatically.

  • inspector/codemirror/resources/prettyprinting/utilities.js:

Update due to simplified construction.

  • inspector/formatting/formatting-javascript-expected.txt: Added.
  • inspector/formatting/formatting-javascript.html: Added.
  • inspector/formatting/resources/javascript-tests/arrow-functions-expected.js: Added.
  • inspector/formatting/resources/javascript-tests/arrow-functions.js: Added.
  • inspector/formatting/resources/javascript-tests/classes-expected.js: Added.
  • inspector/formatting/resources/javascript-tests/classes.js: Added.
  • inspector/formatting/resources/javascript-tests/comments-and-preserve-newlines-expected.js: Added.
  • inspector/formatting/resources/javascript-tests/comments-and-preserve-newlines.js: Added.
  • inspector/formatting/resources/javascript-tests/comments-only-expected.js: Added.
  • inspector/formatting/resources/javascript-tests/comments-only.js: Added.
  • inspector/formatting/resources/javascript-tests/do-while-statement-expected.js: Added.
  • inspector/formatting/resources/javascript-tests/do-while-statement.js: Added.
  • inspector/formatting/resources/javascript-tests/for-statements-expected.js: Added.
  • inspector/formatting/resources/javascript-tests/for-statements.js: Added.
  • inspector/formatting/resources/javascript-tests/functions-expected.js: Added.
  • inspector/formatting/resources/javascript-tests/functions.js: Added.
  • inspector/formatting/resources/javascript-tests/generators-expected.js: Added.
  • inspector/formatting/resources/javascript-tests/generators.js: Added.
  • inspector/formatting/resources/javascript-tests/if-statement-expected.js: Added.
  • inspector/formatting/resources/javascript-tests/if-statement.js: Added.
  • inspector/formatting/resources/javascript-tests/label-break-continue-block-expected.js: Added.
  • inspector/formatting/resources/javascript-tests/label-break-continue-block.js: Added.
  • inspector/formatting/resources/javascript-tests/logic-expressions-expected.js: Added.
  • inspector/formatting/resources/javascript-tests/logic-expressions.js: Added.
  • inspector/formatting/resources/javascript-tests/new-expression-expected.js: Added.
  • inspector/formatting/resources/javascript-tests/new-expression.js: Added.
  • inspector/formatting/resources/javascript-tests/object-array-literal-expected.js: Added.
  • inspector/formatting/resources/javascript-tests/object-array-literal.js: Added.
  • inspector/formatting/resources/javascript-tests/return-statement-expected.js: Added.
  • inspector/formatting/resources/javascript-tests/return-statement.js: Added.
  • inspector/formatting/resources/javascript-tests/sample-jquery-expected.js: Added.
  • inspector/formatting/resources/javascript-tests/sample-jquery.js: Added.
  • inspector/formatting/resources/javascript-tests/sample-normal-utilities-expected.js: Added.
  • inspector/formatting/resources/javascript-tests/sample-normal-utilities.js: Added.
  • inspector/formatting/resources/javascript-tests/sample-webinspector-object-expected.js: Added.
  • inspector/formatting/resources/javascript-tests/sample-webinspector-object.js: Added.
  • inspector/formatting/resources/javascript-tests/switch-case-default-expected.js: Added.
  • inspector/formatting/resources/javascript-tests/switch-case-default.js: Added.
  • inspector/formatting/resources/javascript-tests/ternary-expressions-expected.js: Added.
  • inspector/formatting/resources/javascript-tests/ternary-expressions.js: Added.
  • inspector/formatting/resources/javascript-tests/throw-statement-expected.js: Added.
  • inspector/formatting/resources/javascript-tests/throw-statement.js: Added.
  • inspector/formatting/resources/javascript-tests/try-catch-finally-statements-expected.js: Added.
  • inspector/formatting/resources/javascript-tests/try-catch-finally-statements.js: Added.
  • inspector/formatting/resources/javascript-tests/unary-binary-expressions-expected.js: Added.
  • inspector/formatting/resources/javascript-tests/unary-binary-expressions.js: Added.
  • inspector/formatting/resources/javascript-tests/variable-declaration-expected.js: Added.
  • inspector/formatting/resources/javascript-tests/variable-declaration.js: Added.
  • inspector/formatting/resources/javascript-tests/while-statement-expected.js: Added.
  • inspector/formatting/resources/javascript-tests/while-statement.js: Added.
  • inspector/formatting/resources/javascript-tests/with-statement-expected.js: Added.
  • inspector/formatting/resources/javascript-tests/with-statement.js: Added.
  • inspector/formatting/resources/utilities.js: Added.

Expanded test coverage for the new formatter.

12:00 PM Changeset in webkit [199167] by Brian Burg
  • 23 edits in trunk/Source

CookieJar should support adding synthetic cookies for developer tools
https://bugs.webkit.org/show_bug.cgi?id=156091
<rdar://problem/25581340>

Reviewed by Timothy Hatcher.

Source/WebCore:

This patch adds an API that can set an arbitrary cookie in cookie storage
in order to support developer tools and automated testing. It delegates storing
the cookie to a platform implementation.

No new tests because the code isn't used by any clients yet.

  • loader/CookieJar.cpp:

(WebCore::addCookie): Added.

  • loader/CookieJar.h:
  • platform/Cookie.h:

Remove an outdated comment. This struct is used in many places.

  • platform/CookiesStrategy.h: Add new method.
  • platform/network/PlatformCookieJar.h: Add new method.
  • platform/network/cf/CookieJarCFNet.cpp:

(WebCore::addCookie): Add a stub.

  • platform/network/curl/CookieJarCurl.cpp:

(WebCore::addCookie): Add a stub.

  • platform/network/mac/CookieJarMac.mm:

(WebCore::addCookie): Add an implementation that turns the WebCore::Cookie into
an NSHTTPCookie and converts it again to CFHTTPCookie if necessary.

  • platform/network/soup/CookieJarSoup.cpp:

(WebCore::addCookie): Add a stub.

  • platform/spi/cf/CFNetworkSPI.h:

Add -[NSHTTPCookie _CFHTTPCookie] SPI.

Source/WebKit/mac:

  • WebCoreSupport/WebPlatformStrategies.h:
  • WebCoreSupport/WebPlatformStrategies.mm:

(WebPlatformStrategies::addCookie):
Add new method override.

Source/WebKit/win:

  • WebCoreSupport/WebPlatformStrategies.h:
  • WebCoreSupport/WebPlatformStrategies.cpp:

Add new method override.

Source/WebKit2:

Plumb the new method through the strategy and out to the network process.

  • NetworkProcess/NetworkConnectionToWebProcess.cpp:

(WebKit::NetworkConnectionToWebProcess::addCookie):

  • NetworkProcess/NetworkConnectionToWebProcess.h:
  • NetworkProcess/NetworkConnectionToWebProcess.messages.in:
  • WebProcess/WebCoreSupport/WebPlatformStrategies.cpp:

(WebKit::WebPlatformStrategies::addCookie):

  • WebProcess/WebCoreSupport/WebPlatformStrategies.h:
11:38 AM Changeset in webkit [199166] by fpizlo@apple.com
  • 4 edits in trunk/Source/JavaScriptCore

Rationalize the makeSpaceForCCall stuff
https://bugs.webkit.org/show_bug.cgi?id=156352

Reviewed by Mark Lam.

I want to add more code to PolymorphicAccess that makes C calls, so that I can finally fix
https://bugs.webkit.org/show_bug.cgi?id=130914 (allow transition caches to handle indexing
headers).

When trying to understand what it takes to make a C call, I came across code that was making
room on the stack for spilled arguments. This logic was guarded with some complicated
condition. At first, I tried to just refactor the code so that the same ugly condition
wouldn't have to be copy-pasted everywhere that we made C calls. But then I started thinking
about the condition, and realized that it was probably wrong: if the outer PolymorphicAccess
harness decides to reuse a register for the scratchGPR then the top of the stack will store
the old value of scratchGPR, but the condition wouldn't necessarily trigger. So if the call
then overwrote something on the stack, we'd have a bad time.

Making room on the stack for a call is a cheap operation. It's orders of magnitude cheaper
than the rest of the call. Therefore, I think that it's best to just unconditionally make
room on the stack.

This patch makes us do just that. I also made the relevant helpers not inline, because I
think that we have too many inline methods in our assemblers. Now it's much easier to make
C calls from PolymorphicAccess because you just call the AssemblyHelper methods for making
space. There are no special conditions or anything like that.

  • bytecode/PolymorphicAccess.cpp:

(JSC::AccessCase::generate):

  • jit/AssemblyHelpers.cpp:

(JSC::AssemblyHelpers::emitLoadStructure):
(JSC::AssemblyHelpers::makeSpaceOnStackForCCall):
(JSC::AssemblyHelpers::reclaimSpaceOnStackForCCall):
(JSC::emitRandomThunkImpl):

  • jit/AssemblyHelpers.h:

(JSC::AssemblyHelpers::makeSpaceOnStackForCCall): Deleted.
(JSC::AssemblyHelpers::reclaimSpaceOnStackForCCall): Deleted.

11:22 AM Changeset in webkit [199165] by jiewen_tan@apple.com
  • 2 edits in trunk/LayoutTests

Marking storage/indexeddb/modern/autoincrement-abort-private.html as flaky on Macs
https://bugs.webkit.org/show_bug.cgi?id=156351

Unreviewed test gardening.

  • platform/mac/TestExpectations:
11:06 AM Changeset in webkit [199164] by commit-queue@webkit.org
  • 42 edits
    5 deletes in trunk

Unreviewed, rolling out r199128 and r199141.
https://bugs.webkit.org/show_bug.cgi?id=156348

Causes crashes on multiple webpages (Requested by keith_mi_ on
#webkit).

Reverted changesets:

"[ES6] Add support for Symbol.isConcatSpreadable."
https://bugs.webkit.org/show_bug.cgi?id=155351
http://trac.webkit.org/changeset/199128

"Unreviewed, uncomment accidentally commented line in test."
http://trac.webkit.org/changeset/199141

11:03 AM Changeset in webkit [199163] by dbates@webkit.org
  • 5 edits
    8 adds in trunk

CSP: Should only honor CSP policy delivered in meta tag that is a descendent of <head>
https://bugs.webkit.org/show_bug.cgi?id=59858
<rdar://problem/25603538>

Reviewed by Brent Fulgham.

Source/WebCore:

Ignore the Content Security Policy meta tag if it is not a descendent of <head> as per
section HTML meta Element of the Content Security Policy Level 2 spec., <https://w3c.github.io/webappsec-csp/2/>
(Editor's Draft, 29 August 2015).

Tests: http/tests/security/contentSecurityPolicy/meta-tag-ignored-if-not-in-head.html

http/tests/security/contentSecurityPolicy/meta-tag-ignored-if-not-in-head2.html
http/tests/security/contentSecurityPolicy/report-only-meta-tag-ignored-if-not-in-head.html
http/tests/security/contentSecurityPolicy/report-only-meta-tag-ignored-if-not-in-head2.html

  • dom/Document.cpp:

(WebCore::Document::processHttpEquiv): Modified to take a boolean argument whether the http-equiv
meta tag is a descendent of <head> and to parse the value of a Content Security Policy http-equiv
only if the http-equiv meta tag is a descendent of <head>.

  • dom/Document.h: Add parameter isInDocument to processHttpEquiv(). Remove javadoc-style parameters

from processHttpEquiv() comment as we do not document parameters for non-API functions using such style.
Also write the comment for processHttpEquiv() using C++ style comments instead of a C-style comment.

  • html/HTMLMetaElement.cpp:

(WebCore::HTMLMetaElement::process): Pass whether this element is a descendent of <head>. Additionally
update stale comment and move it closer to the code it refers to.

LayoutTests:

Add tests to ensure that we ignore the meta tags for Content-Security-Policy, Content-Security-Policy-Report-Only,
X-WebKit-CSP, and X-WebKit-CSP-Report-Only if it is not a descendent of <head>.

  • http/tests/security/contentSecurityPolicy/meta-tag-ignored-if-not-in-head-expected.txt: Added.
  • http/tests/security/contentSecurityPolicy/meta-tag-ignored-if-not-in-head.html: Added.
  • http/tests/security/contentSecurityPolicy/meta-tag-ignored-if-not-in-head2-expected.txt: Added.
  • http/tests/security/contentSecurityPolicy/meta-tag-ignored-if-not-in-head2.html: Added.
  • http/tests/security/contentSecurityPolicy/report-only-meta-tag-ignored-if-not-in-head-expected.txt: Added.
  • http/tests/security/contentSecurityPolicy/report-only-meta-tag-ignored-if-not-in-head.html: Added.
  • http/tests/security/contentSecurityPolicy/report-only-meta-tag-ignored-if-not-in-head2-expected.txt: Added.
  • http/tests/security/contentSecurityPolicy/report-only-meta-tag-ignored-if-not-in-head2.html: Added.
10:59 AM Changeset in webkit [199162] by fpizlo@apple.com
  • 3 edits in trunk/Source/JavaScriptCore

Rationalize the handling of PutById transitions a bit
https://bugs.webkit.org/show_bug.cgi?id=156330

Reviewed by Mark Lam.

  • bytecode/PolymorphicAccess.cpp:

(JSC::AccessCase::generate): Get rid of the specialized slow calls. We can just use the failAndIgnore jump target. We just need to make sure that we don't make observable effects until we're done with all of the fast path checks.

  • bytecode/StructureStubInfo.cpp:

(JSC::StructureStubInfo::addAccessCase): MadeNoChanges indicates that we should keep trying to repatch. Currently PutById transitions might trigger the case that addAccessCase() sees null, if the transition involves an indexing header. Doing repatching in that case is probably not good. But, we should just fix this the right way eventually.

10:40 AM Changeset in webkit [199161] by Brent Fulgham
  • 2 edits in trunk/Source/WebCore

[Win] Output WebCore.pdb to the same location as WebCore.lib
https://bugs.webkit.org/show_bug.cgi?id=156256
<rdar://problem/19416363>

Reviewed by Alex Christensen.

Add a rule to WebCore's CMake generator to tell Visual Studio to output
the PDB file for the WebCore.lib in the same location as the resulting
library, rather than in the build intermediary location).

  • CMakeLists.txt:
10:31 AM Changeset in webkit [199160] by peavo@outlook.com
  • 2 edits in trunk/Source/JavaScriptCore

[Win] Fix for JSC stress test failures.
https://bugs.webkit.org/show_bug.cgi?id=156343

Reviewed by Filip Pizlo.

We need to make it clear to MSVC that the method loadPtr(ImplicitAddress address, RegisterID dest)
should be used, and not loadPtr(const void* address, RegisterID dest).

  • jit/CCallHelpers.cpp:

(JSC::CCallHelpers::setupShadowChickenPacket):

10:12 AM Changeset in webkit [199159] by weinig@apple.com
  • 9 edits in trunk

window.Crypto is missing
<rdar://problem/25584034>
https://bugs.webkit.org/show_bug.cgi?id=156307

Reviewed by Joseph Pecoraro.

Source/WebCore:

Expose the Crypto constructor on the window object.

  • page/Crypto.idl:

LayoutTests:

  • js/dom/global-constructors-attributes-expected.txt:
  • platform/efl/js/dom/global-constructors-attributes-expected.txt:
  • platform/gtk/js/dom/global-constructors-attributes-expected.txt:
  • platform/mac-yosemite/js/dom/global-constructors-attributes-expected.txt:
  • platform/mac/js/dom/global-constructors-attributes-expected.txt:
  • platform/win/js/dom/global-constructors-attributes-expected.txt:

Update for the new Crypto constructor.

9:37 AM Changeset in webkit [199158] by commit-queue@webkit.org
  • 2 edits in trunk/Source/WebKit

[CMake][Win] Generating autoversion.h of WebKitGUID is triggered again and again
https://bugs.webkit.org/show_bug.cgi?id=156332

Patch by Fujii Hironori <Hironori.Fujii@jp.sony.com> on 2016-04-07
Reviewed by Brent Fulgham.

  • PlatformWin.cmake:

Correct the output path of autoversion.h.

9:27 AM Changeset in webkit [199157] by commit-queue@webkit.org
  • 2 edits in trunk/Source/WebCore

[CMake][Win] WEBKIT_WRAP_SOURCELIST is not applied in WebCore project
https://bugs.webkit.org/show_bug.cgi?id=156336

Patch by Fujii Hironori <Hironori.Fujii@jp.sony.com> on 2016-04-07
Reviewed by Csaba Osztrogonác.

  • CMakeLists.txt: Do WEBKIT_WRAP_SOURCELIST for WebCore_SOURCES.
7:55 AM Changeset in webkit [199156] by Alan Bujtas
  • 3 edits
    2 adds in trunk

REGRESSION (197987): Ingredient lists on smittenkitchen.com are full justified instead of left justified.
https://bugs.webkit.org/show_bug.cgi?id=156326
<rdar://problem/25519393>

Reviewed by Antti Koivisto.

According to the spec (https://drafts.csswg.org/css-text-3/#text-align-property)
unless otherwise specified by text-align-last, the last line before
a forced break or the end of the block is start-aligned.

In this patch we check if a forced break is present and we apply text alignment accordingly.

Test: fast/css3-text/css3-text-justify/text-justify-last-line-simple-line-layout.html

Source/WebCore:

  • rendering/SimpleLineLayout.cpp:

(WebCore::SimpleLineLayout::LineState::lastFragment): Make it optional so that we don't just check against a default fragment.
(WebCore::SimpleLineLayout::createLineRuns):
(WebCore::SimpleLineLayout::justifyRuns): Do not compute first run index on the current line twice.
(WebCore::SimpleLineLayout::textAlignForLine):
(WebCore::SimpleLineLayout::closeLineEndingAndAdjustRuns):

LayoutTests:

  • fast/css3-text/css3-text-justify/text-justify-last-line-simple-line-layout-expected.html: Added.
  • fast/css3-text/css3-text-justify/text-justify-last-line-simple-line-layout.html: Added.
7:22 AM Changeset in webkit [199155] by Antti Koivisto
  • 2 edits in trunk/Source/WebCore

FrameView::qualifiesAsVisuallyNonEmpty() returns false when loading a Google search results page before search results are loaded, even though the header is visible
https://bugs.webkit.org/show_bug.cgi?id=156339
<rdar://problem/24491381>

Reviewed by Andreas Kling.

Jeff's testing indicates lowering the document height threshold improves things visually during page loading.

  • page/FrameView.cpp:

(WebCore::FrameView::qualifiesAsVisuallyNonEmpty):

Lower document height threshold to from 200 to 48 pixels.

3:29 AM Changeset in webkit [199154] by Antti Koivisto
  • 18 edits in trunk

Shadow DOM: Implement display: contents for slots
https://bugs.webkit.org/show_bug.cgi?id=149439
<rdar://problem/22731922>

Reviewed by Ryosuke Niwa.

Source/WebCore:

This patch adds support for value 'contents' of the 'display' property for <slot> elements only. The value is ignored
for other elements for now. With this display value the element does not generate a box for itself but its descendants
generate them normally.

Slots already have implicit "display: contents". With this patch the value comes from the user agent stylesheet and can
be overriden by the author.

  • css/CSSParser.cpp:

(WebCore::isValidKeywordPropertyAndValue):

  • css/CSSPrimitiveValueMappings.h:

(WebCore::CSSPrimitiveValue::CSSPrimitiveValue):

  • css/CSSValueKeywords.in:

Suport parsing display: contents.

  • css/StyleResolver.cpp:

(WebCore::equivalentBlockDisplay):
(WebCore::StyleResolver::adjustRenderStyle):

Disallow for non-slots for now.

  • css/html.css:

(slot):

Add "slot { display: contents }" to the UA sheet.

  • dom/Element.cpp:

(WebCore::Element::resolveStyle):
(WebCore::Element::hasDisplayContents):
(WebCore::Element::setHasDisplayContents):

Add a rare data bit for elements with display:contents (as we don't save the RenderStyle for them).

(WebCore::Element::rendererIsNeeded):

Don't need renderer for display:contents.

(WebCore::Element::createElementRenderer):

  • dom/Element.h:

(WebCore::Element::isVisibleInViewportChanged):

  • dom/ElementAndTextDescendantIterator.h:

(WebCore::ElementAndTextDescendantIterator::operator!):
(WebCore::ElementAndTextDescendantIterator::operator bool):
(WebCore::ElementAndTextDescendantIterator::ElementAndTextDescendantIterator):
(WebCore::ElementAndTextDescendantIterator::operator==):
(WebCore::ElementAndTextDescendantIterator::operator!=):

Support initializing ElementAndTextDescendantIterator with root==current so that m_current is not nulled.
This is needed for ComposedTreeIterator to be initialized correctly when root is a slot and the current node
is a slotted node. The case happens in RenderTreePosition::previousSiblingRenderer when slot display is overriden
to something else than 'contents'.

  • dom/ElementRareData.h:

(WebCore::ElementRareData::hasDisplayContents):
(WebCore::ElementRareData::setHasDisplayContents):
(WebCore::ElementRareData::ElementRareData):

  • rendering/RenderElement.cpp:

(WebCore::RenderElement::createFor):

  • rendering/style/RenderStyleConstants.h:
  • style/RenderTreePosition.cpp:

(WebCore::RenderTreePosition::nextSiblingRenderer):

Test for dynamic display:contents.

  • style/RenderTreeUpdater.cpp:

(WebCore::findRenderingRoot):
(WebCore::RenderTreeUpdater::updateRenderTree):
(WebCore::RenderTreeUpdater::updateElementRenderer):

Test for dynamic display:contents.

  • style/StyleTreeResolver.cpp:

(WebCore::Style::affectsRenderedSubtree):

No need for special case.

(WebCore::Style::TreeResolver::resolveComposedTree):

Test for dynamic display:contents.

LayoutTests:

  • platform/mac/TestExpectations:

Enable fast/shadow-dom/css-scoping-shadow-slot-display-override.html, the test for overriding slot display value.

3:23 AM Changeset in webkit [199153] by svillar@igalia.com
  • 3 edits
    2 adds in trunk

[css-grid] Content box incorrectly used as non-auto min-height
https://bugs.webkit.org/show_bug.cgi?id=155946

Reviewed by Antti Koivisto.

Source/WebCore:

When computing the minimum height value of grid items with
non-auto min-height we used to return the size of the content
box meaning that borders and paddings were incorrectly
ignored.

Note that we're also ignoring margins, but as that is a
problem also for widths it'll be fixed in a follow up patch.

Test: fast/css-grid-layout/min-height-border-box.html

  • rendering/RenderGrid.cpp:

(WebCore::RenderGrid::minSizeForChild):

LayoutTests:

  • fast/css-grid-layout/min-height-border-box-expected.txt: Added.
  • fast/css-grid-layout/min-height-border-box.html: Added.
3:21 AM Changeset in webkit [199152] by Antti Koivisto
  • 18 edits in trunk

Reverting previous due to bad LayoutTest ChangeLog.
LayoutTests:

  • platform/mac/TestExpectations:
3:11 AM Changeset in webkit [199151] by Antti Koivisto
  • 18 edits in trunk

Source/WebCore:
Shadow DOM: Implement display: contents for slots
https://bugs.webkit.org/show_bug.cgi?id=149439
<rdar://problem/22731922>

Reviewed by Ryosuke Niwa.

This patch adds support for value 'contents' of the 'display' property for <slot> elements only. The value is ignored
for other elements for now. With this display value the element does not generate a box for itself but its descendants
generate them normally.

Slots already have implicit "display: contents". With this patch the value comes from the user agent stylesheet and can
be overriden by the author.

  • css/CSSParser.cpp:

(WebCore::isValidKeywordPropertyAndValue):

  • css/CSSPrimitiveValueMappings.h:

(WebCore::CSSPrimitiveValue::CSSPrimitiveValue):

  • css/CSSValueKeywords.in:

Suport parsing display: contents.

  • css/StyleResolver.cpp:

(WebCore::equivalentBlockDisplay):
(WebCore::StyleResolver::adjustRenderStyle):

Disallow for non-slots for now.

  • css/html.css:

(slot):

Add "slot { display: contents }" to the UA sheet.

  • dom/Element.cpp:

(WebCore::Element::resolveStyle):
(WebCore::Element::hasDisplayContents):
(WebCore::Element::setHasDisplayContents):

Add a rare data bit for elements with display:contents (as we don't save the RenderStyle for them).

(WebCore::Element::rendererIsNeeded):

Don't need renderer for display:contents.

(WebCore::Element::createElementRenderer):

  • dom/Element.h:

(WebCore::Element::isVisibleInViewportChanged):

  • dom/ElementAndTextDescendantIterator.h:

(WebCore::ElementAndTextDescendantIterator::operator!):
(WebCore::ElementAndTextDescendantIterator::operator bool):
(WebCore::ElementAndTextDescendantIterator::ElementAndTextDescendantIterator):
(WebCore::ElementAndTextDescendantIterator::operator==):
(WebCore::ElementAndTextDescendantIterator::operator!=):

Support initializing ElementAndTextDescendantIterator with root==current so that m_current is not nulled.
This is needed for ComposedTreeIterator to be initialized correctly when root is a slot and the current node
is a slotted node. The case happens in RenderTreePosition::previousSiblingRenderer when slot display is overriden
to something else than 'contents'.

  • dom/ElementRareData.h:

(WebCore::ElementRareData::hasDisplayContents):
(WebCore::ElementRareData::setHasDisplayContents):
(WebCore::ElementRareData::ElementRareData):

  • rendering/RenderElement.cpp:

(WebCore::RenderElement::createFor):

  • rendering/style/RenderStyleConstants.h:
  • style/RenderTreePosition.cpp:

(WebCore::RenderTreePosition::nextSiblingRenderer):

Test for dynamic display:contents.

  • style/RenderTreeUpdater.cpp:

(WebCore::findRenderingRoot):
(WebCore::RenderTreeUpdater::updateRenderTree):
(WebCore::RenderTreeUpdater::updateElementRenderer):

Test for dynamic display:contents.

  • style/StyleTreeResolver.cpp:

(WebCore::Style::affectsRenderedSubtree):

No need for special case.

(WebCore::Style::TreeResolver::resolveComposedTree):

Test for dynamic display:contents.

LayoutTests:
REGRESSION (r188591): thingiverse.com direct messaging UI is not rendered properly
https://bugs.webkit.org/show_bug.cgi?id=156241
<rdar://problem/25262213>

Patch by Myles C. Maxfield <mmaxfield@apple.com> on 2016-04-06
Reviewed by Simon Fraser.

  • fast/text/zero-sized-fonts-expected.txt: Added.
  • fast/text/zero-sized-fonts.html: Added.
12:45 AM MathML/Early_2016_Refactoring edited by fred.wang@free.fr
(diff)
Note: See TracTimeline for information about the timeline view.